{ "_class" : "org.jenkinsci.plugins.workflow.job.WorkflowRun", "actions" : [ { "_class" : "hudson.model.ParametersAction", "parameters" : [ { "_class" : "hudson.model.StringParameterValue", "name" : "orin", "value" : "slave" }, { "_class" : "hudson.model.StringParameterValue", "name" : "confList", "value" : "Get-Branchs" }, { "_class" : "hudson.model.StringParameterValue", "name" : "conf", "value" : "Could not get conf for confList" }, { "_class" : "hudson.model.StringParameterValue", "name" : "checkall", "value" : "yes" }, { "_class" : "hudson.model.StringParameterValue", "name" : "OTA", "value" : "public" }, { "_class" : "hudson.model.StringParameterValue", "name" : "region", "value" : "daxie" }, { "_class" : "hudson.model.StringParameterValue", "name" : "deviceChoice", "value" : "false" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msgBranch", "value" : "rc_dev_weihai" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rslidarSDKBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cameraDriverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "loginSyncToolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemRosBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "thirdpartyBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "unifiedSystemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rosBridgeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdcontrolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "versionsObserverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cacheBagNodeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "performanceAnalystBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "scheduleManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rcinterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rminterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerOnlineBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rtspRelayerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hesaiLidarBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newTruckSpreaderDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapInterfaceBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "staticTransformBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfLocBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfAssistantBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "peripheralControllerBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "laneDetectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "dataCollectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "tosVisualizeBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "sinsCalibrationHmiBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "toolsBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "segmentationBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapCloudBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerHmiBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "pncBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "controlBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "calibrationToolsBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "groundmarkerDetectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "snapshotUploadBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "spreaderSegmentationBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "perceptionPublisherBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "avmBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "v2Branch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "craneAlignBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "seniorCalibrationBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "doxBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "warningModuleBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "imvSpreaderDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "mrpt2Branch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lidarCameraFusionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "guardianBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "oleLidarBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "predictionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "operate", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "orinConf", "value" : "slave" }, { "_class" : "hudson.model.StringParameterValue", "name" : "editConfName", "value" : "" }, { "_class" : "hudson.model.StringParameterValue", "name" : "notes", "value" : "测试" }, { "_class" : "hudson.model.StringParameterValue", "name" : "users", "value" : "" } ] }, { "_class" : "hudson.model.CauseAction", "causes" : [ { "_class" : "hudson.model.Cause$UserIdCause", "shortDescription" : "Started by user sunyufu", "userId" : "sunyufu", "userName" : "sunyufu" } ] }, { "_class" : "org.jenkinsci.plugins.workflow.libs.LibrariesAction" }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "branch" : [ { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "name" : "master" } ] }, "revision" : { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "branch" : [ { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "name" : "master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "branch" : [ { "SHA1" : "6eda9ac8f53c9e9a0fc26d9adfa349d451f80a63", "name" : "master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinslib.git" ], "scmName" : "" }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.EnvActionImpl" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "branch" : [ { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "name" : "refs/remotes/origin/master" } ] }, "revision" : { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "branch" : [ { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "name" : "refs/remotes/origin/master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "branch" : [ { "SHA1" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "name" : "refs/remotes/origin/master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinsfiles.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat-peripheral_op_state-chassis_err" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 105, "buildResult" : None, "marked" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] }, "revision" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] } }, "origin/rc_dev_d0713c" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 154, "buildResult" : None, "marked" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] }, "revision" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] } }, "origin/rc_dev_baoshishun" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 287, "buildResult" : None, "marked" : { "SHA1" : "e324c52ceff2015a3d8887a42e19b7b111989c00", "branch" : [ { "SHA1" : "e324c52ceff2015a3d8887a42e19b7b111989c00", "name" : "origin/rc_dev_baoshishun" } ] }, "revision" : { "SHA1" : "e324c52ceff2015a3d8887a42e19b7b111989c00", "branch" : [ { "SHA1" : "e324c52ceff2015a3d8887a42e19b7b111989c00", "name" : "origin/rc_dev_baoshishun" } ] } }, "origin/rc_dev_xiamen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 291, "buildResult" : None, "marked" : { "SHA1" : "483fabd931605b5fe19a49de9f1cbbb1097f497b", "branch" : [ { "SHA1" : "483fabd931605b5fe19a49de9f1cbbb1097f497b", "name" : "origin/rc_dev_xiamen" } ] }, "revision" : { "SHA1" : "483fabd931605b5fe19a49de9f1cbbb1097f497b", "branch" : [ { "SHA1" : "483fabd931605b5fe19a49de9f1cbbb1097f497b", "name" : "origin/rc_dev_xiamen" } ] } }, "origin/rc_dev_dongfen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 250, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_dongfen" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_dongfen" } ] } }, "origin/rc_dev_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 261, "buildResult" : None, "marked" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_xilian" } ] }, "revision" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_xilian" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "branch" : [ { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "branch" : [ { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "name" : "origin/dev" } ] } }, "origin/feat_monitor_frame" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 94, "buildResult" : None, "marked" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] }, "revision" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] } }, "origin/rcdev_0a13c34" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] }, "revision" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] } }, "origin/rc_dev_yantaigunzhuang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 284, "buildResult" : None, "marked" : { "SHA1" : "d1fad67a2675ce2fd783c55248f4a58e09dca483", "branch" : [ { "SHA1" : "d1fad67a2675ce2fd783c55248f4a58e09dca483", "name" : "origin/rc_dev_yantaigunzhuang" } ] }, "revision" : { "SHA1" : "d1fad67a2675ce2fd783c55248f4a58e09dca483", "branch" : [ { "SHA1" : "d1fad67a2675ce2fd783c55248f4a58e09dca483", "name" : "origin/rc_dev_yantaigunzhuang" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 292, "buildResult" : None, "marked" : { "SHA1" : "7d594c755e96741c20d32b84dec169d35b599e9c", "branch" : [ { "SHA1" : "7d594c755e96741c20d32b84dec169d35b599e9c", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7d594c755e96741c20d32b84dec169d35b599e9c", "branch" : [ { "SHA1" : "7d594c755e96741c20d32b84dec169d35b599e9c", "name" : "origin/rc_dev" } ] } }, "origin/feat-peripheral_op_state" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 84, "buildResult" : None, "marked" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] }, "revision" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] } }, "origin/feat_yard_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 129, "buildResult" : None, "marked" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] }, "revision" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] } }, "origin/rc_dev_weihai" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "branch" : [ { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "name" : "origin/rc_dev_weihai" } ] }, "revision" : { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "branch" : [ { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "name" : "origin/rc_dev_weihai" } ] } }, "origin/rcdev_c9969b7" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 79, "buildResult" : None, "marked" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] }, "revision" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] } }, "origin/rc_dev_suxi" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 275, "buildResult" : None, "marked" : { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "branch" : [ { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "name" : "origin/rc_dev_suxi" } ] }, "revision" : { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "branch" : [ { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "name" : "origin/rc_dev_suxi" } ] } }, "origin/rc_dev_jiaxingdongfangtegang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 279, "buildResult" : None, "marked" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_jiaxingdongfangtegang" } ] }, "revision" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_jiaxingdongfangtegang" } ] } } }, "lastBuiltRevision" : { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "branch" : [ { "SHA1" : "5b63832064422758474bde74403392be05d8884d", "name" : "origin/rc_dev_weihai" } ] }, "remoteUrls" : [ "http://159.27.226.4/shared/shared_msgs.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "branch" : [ { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "branch" : [ { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "branch" : [ { "SHA1" : "f533901d32b2cef8f8c03f1e88154cec0efdd579", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/dox.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar_localization_mapping/mrpt2.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/login-sync-tool.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "branch" : [ { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "branch" : [ { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_nolog" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 69, "buildResult" : None, "marked" : { "SHA1" : "0462c305fba72cf146e6619ce7e6ffe9850cfc06", "branch" : [ { "SHA1" : "0462c305fba72cf146e6619ce7e6ffe9850cfc06", "name" : "origin/rc_dev_nolog" } ] }, "revision" : { "SHA1" : "0462c305fba72cf146e6619ce7e6ffe9850cfc06", "branch" : [ { "SHA1" : "0462c305fba72cf146e6619ce7e6ffe9850cfc06", "name" : "origin/rc_dev_nolog" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "branch" : [ { "SHA1" : "a0e6744c34f0dfbef919446664b97024ad30bb46", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/new_detection.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/map_update_new" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 53, "buildResult" : None, "marked" : { "SHA1" : "634f0ae9f443c96e67adb8fdc594da825acab5d2", "branch" : [ { "SHA1" : "634f0ae9f443c96e67adb8fdc594da825acab5d2", "name" : "origin/map_update_new" } ] }, "revision" : { "SHA1" : "634f0ae9f443c96e67adb8fdc594da825acab5d2", "branch" : [ { "SHA1" : "634f0ae9f443c96e67adb8fdc594da825acab5d2", "name" : "origin/map_update_new" } ] } }, "refs/remotes/origin/gld/no-log-version" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 69, "buildResult" : None, "marked" : { "SHA1" : "f2329bd7fc33918ead660d1f388e970ccaf71e07", "branch" : [ { "SHA1" : "f2329bd7fc33918ead660d1f388e970ccaf71e07", "name" : "refs/remotes/origin/gld/no-log-version" } ] }, "revision" : { "SHA1" : "f2329bd7fc33918ead660d1f388e970ccaf71e07", "branch" : [ { "SHA1" : "f2329bd7fc33918ead660d1f388e970ccaf71e07", "name" : "refs/remotes/origin/gld/no-log-version" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "branch" : [ { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "branch" : [ { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "name" : "origin/rc_dev" } ] } }, "origin/fix_ws_slip" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 8, "buildResult" : None, "marked" : { "SHA1" : "26b2cc4882315e1288fc9bcb05f08b3fe6f18511", "branch" : [ { "SHA1" : "26b2cc4882315e1288fc9bcb05f08b3fe6f18511", "name" : "origin/fix_ws_slip" } ] }, "revision" : { "SHA1" : "26b2cc4882315e1288fc9bcb05f08b3fe6f18511", "branch" : [ { "SHA1" : "26b2cc4882315e1288fc9bcb05f08b3fe6f18511", "name" : "origin/fix_ws_slip" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 146, "buildResult" : None, "marked" : { "SHA1" : "a8fce03657c833bbb72f8c4fe4e82da04e67536d", "branch" : [ { "SHA1" : "a8fce03657c833bbb72f8c4fe4e82da04e67536d", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "a8fce03657c833bbb72f8c4fe4e82da04e67536d", "branch" : [ { "SHA1" : "a8fce03657c833bbb72f8c4fe4e82da04e67536d", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "branch" : [ { "SHA1" : "733ea42604b433c5350254da75b82ad5247798ca", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar_localization_mapping/lidar_loc_v2.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/ry/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 293, "buildResult" : None, "marked" : { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "branch" : [ { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "name" : "refs/remotes/origin/ry/dev" } ] }, "revision" : { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "branch" : [ { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "name" : "refs/remotes/origin/ry/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "branch" : [ { "SHA1" : "5e273776009e4048b6d3ec55cecc9f273426a76f", "name" : "refs/remotes/origin/ry/dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/ethzasl_msf" ], "scmName" : "" }, { }, { }, { "_class" : "org.jenkinsci.plugins.displayurlapi.actions.RunDisplayAction" }, { "_class" : "org.jenkinsci.plugins.pipeline.modeldefinition.actions.RestartDeclarativePipelineAction" }, { }, { "_class" : "org.jenkinsci.plugins.workflow.job.views.FlowGraphAction" }, { }, { }, { } ], "artifacts" : [ ], "building" : False, "description" : None, "displayName" : "#293", "duration" : 384813, "estimatedDuration" : 1172321, "executor" : None, "fullDisplayName" : "orin-slave64 #293", "id" : "293", "keepLog" : False, "number" : 293, "queueId" : 1249643, "result" : "FAILURE", "timestamp" : 1786620445409, "url" : "http://159.27.114.184:8080/jenkins/user/yangyuxing/my-views/view/all/job/orin-slave64/293/", "changeSets" : [ { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hardware/mizar.jenkinsfile" ], "commitId" : "20cf9b543635e9f87bbe16685bb9d6f4f06c9f92", "timestamp" : 1786506164000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update mizar.jenkinsfile\u000a", "date" : "2026-08-12 03:42:44 +0000", "id" : "20cf9b543635e9f87bbe16685bb9d6f4f06c9f92", "msg" : "Update mizar.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hardware/mizar.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hardware/polaris.jenkinsfile" ], "commitId" : "9df77fead0f3ed7d3debc9faadc8e54b0e0ba13b", "timestamp" : 1786506224000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update polaris.jenkinsfile\u000a", "date" : "2026-08-12 03:43:44 +0000", "id" : "9df77fead0f3ed7d3debc9faadc8e54b0e0ba13b", "msg" : "Update polaris.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hardware/polaris.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hardware/tc397_ota.jenkinsfile" ], "commitId" : "01bce7d15ff85890aafd509a99270dabc1206b50", "timestamp" : 1786506269000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update tc397_ota.jenkinsfile\u000a", "date" : "2026-08-12 03:44:29 +0000", "id" : "01bce7d15ff85890aafd509a99270dabc1206b50", "msg" : "Update tc397_ota.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hardware/tc397_ota.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hdmap/hdmap-cloud.jenkinsfile" ], "commitId" : "aa9e09286014137966e69d6f3434fa2509faa446", "timestamp" : 1786506317000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update hdmap-cloud.jenkinsfile\u000a", "date" : "2026-08-12 03:45:17 +0000", "id" : "aa9e09286014137966e69d6f3434fa2509faa446", "msg" : "Update hdmap-cloud.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hdmap/hdmap-cloud.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hdmap/map-png.jenkinsfile" ], "commitId" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "timestamp" : 1786526970000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update map-png.jenkinsfile\u000a", "date" : "2026-08-12 09:29:30 +0000", "id" : "5a88a9b6a5620171ede7924afb9741e9279e6bc9", "msg" : "Update map-png.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hdmap/map-png.jenkinsfile" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lib/pointpillars", "perception/dl_detection/lib/CMakeLists.txt", "perception/dl_detection/lib/centerpoint", "conf/perception_imv.rviz" ], "commitId" : "b25dfba226d9aa3dd14981214a21ef62f868c393", "timestamp" : 1782128382000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "feat(trt10): 引入 BUILD_TRT10 编译开关, 适配 x86 Blackwell + TRT10 环境\u000a\u000aCMakeLists 增加 option(BUILD_TRT10), 默认 OFF:\u000a - OFF (默认): GPU 架构 = 原 SMS 列表 (30 32 35 37 50 52 53 60 61 62 70 72 75 87),\u000a 行为与改动前完全一致, Orin/Xavier/老 x86 部署不受影响.\u000a - ON : GPU 架构 = sm_120 (RTX 50xx Blackwell), 同名宏 BUILD_TRT10 自动注入\u000a C/C++ 和 NVCC, 子模块通过 add_subdirectory 继承.\u000a 源码侧走 TRT10 新 API (delete / setMemoryPoolLimit / enqueueV3 +\u000a setTensorAddress / setInputShape 等), 见 centerpoint/pointpillars\u000a submodule 同名 commit.\u000a\u000a子模块指针更新:\u000a - centerpoint -> 068e2dd (cp_lib)\u000a - pointpillars -> af67324 (dev)\u000a\u000a同时纳入本机 RViz 视图配置: conf/perception_imv.rviz.\u000a\u000a使用:\u000a catkin build # 老环境, 行为不变\u000a catkin build --cmake-args -DBUILD_TRT10=ON # 本机 Blackwell+TRT10\u000a\u000aCo-authored-by: Cursor \u000a", "date" : "2026-06-22 19:39:42 +0800", "id" : "b25dfba226d9aa3dd14981214a21ef62f868c393", "msg" : "feat(trt10): 引入 BUILD_TRT10 编译开关, 适配 x86 Blackwell + TRT10 环境", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lib/pointpillars" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/CMakeLists.txt" }, { "editType" : "edit", "file" : "conf/perception_imv.rviz" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/centerpoint" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/doc/container_face_angle.md", "perception/dl_detection/lidar/impl/dld_trailer_calculator.cpp", "perception/dl_detection/CMakeLists.txt", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calculator.h", "perception/common/common_types.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "conf/perception_imv.rviz" ], "commitId" : "f210ae0f2babe793a0b5b20443ead46c420e65ce", "timestamp" : 1782315622000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂角度校正添加箱体面估计新算法.\u000a", "date" : "2026-06-24 23:40:22 +0800", "id" : "f210ae0f2babe793a0b5b20443ead46c420e65ce", "msg" : "note_out:车挂角度校正添加箱体面估计新算法.", "paths" : [ { "editType" : "add", "file" : "perception/dl_detection/lidar/doc/container_face_angle.md" }, { "editType" : "delete", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calculator.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "conf/perception_imv.rviz" }, { "editType" : "delete", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calculator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/CMakeLists.txt" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/lidar/doc/container_face_angle.md", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" ], "commitId" : "150f7c3a6d00ecc7a545118c4ac52c35b533a9ca", "timestamp" : 1782356639000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂角度校正箱体面算法修改.\u000a", "date" : "2026-06-25 11:03:59 +0800", "id" : "150f7c3a6d00ecc7a545118c4ac52c35b533a9ca", "msg" : "note_out:车挂角度校正箱体面算法修改.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/doc/container_face_angle.md" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/common/common_types.h", "perception/dl_detection/lidar/doc/container_face_angle.md" ], "commitId" : "6ef466422ea31daa3b2862d33dd856a726de0ebb", "timestamp" : 1782361251000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂角度校正日志和显示修改.\u000a", "date" : "2026-06-25 12:20:51 +0800", "id" : "6ef466422ea31daa3b2862d33dd856a726de0ebb", "msg" : "note_out:车挂角度校正日志和显示修改.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/doc/container_face_angle.md" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", ".gitignore", "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/doc/container_face_angle.md", "perception/common/common_types.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" ], "commitId" : "61a9c18a18f3bd0e3d1a69cff0b382e7c8d5174d", "timestamp" : 1782378756000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:前箱面由小格选单点变为选一定范围内的点.\u000a", "date" : "2026-06-25 17:12:36 +0800", "id" : "61a9c18a18f3bd0e3d1a69cff0b382e7c8d5174d", "msg" : "note_out:前箱面由小格选单点变为选一定范围内的点.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/doc/container_face_angle.md" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "b504a616b6ebc079e6c56ece1054295f0a3670c5", "timestamp" : 1782382890000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度.\u000a", "date" : "2026-06-25 18:21:30 +0800", "id" : "b504a616b6ebc079e6c56ece1054295f0a3670c5", "msg" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp.bak_expandfix", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "3a8d5bad7582b4baed5156f411632cd8b15cfb31", "timestamp" : 1782395069000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度,适配小角度计算方法.\u000a", "date" : "2026-06-25 21:44:29 +0800", "id" : "3a8d5bad7582b4baed5156f411632cd8b15cfb31", "msg" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度,适配小角度计算方法.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "add", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp.bak_expandfix" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp.bak_expandfix" ], "commitId" : "bbcc5cad36d670e5bfa584dbbdf07c9e752e08da", "timestamp" : 1782395243000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度,适配小角度计算方法.\u000a", "date" : "2026-06-25 21:47:23 +0800", "id" : "bbcc5cad36d670e5bfa584dbbdf07c9e752e08da", "msg" : "note_out:车挂校正无可靠初始角度时搜索挂前沿侧面计算粗糙参考角度,适配小角度计算方法.", "paths" : [ { "editType" : "delete", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp.bak_expandfix" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator_by_container.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator_by_container.cpp", ".gitignore", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" ], "commitId" : "3b43ea991805034088274a4115cd3d495aa62ec5", "timestamp" : 1782439620000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:恢复误删除的车挂显示相关topic&&拆分dld_trailer_calibrator.cpp中两个类到两个单独的文件.\u000a", "date" : "2026-06-26 10:07:00 +0800", "id" : "3b43ea991805034088274a4115cd3d495aa62ec5", "msg" : "note_out:恢复误删除的车挂显示相关topic&&拆分dld_trailer_calibrator.cpp中两个类到两个单独的文件.", "paths" : [ { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "add", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator_by_container.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "add", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator_by_container.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator_by_container.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator_by_container.cpp" ], "commitId" : "171fd1314f696f7b19850c94412ff0177dc969ae", "timestamp" : 1782441898000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:修改enable_expand_filter_用法.\u000a", "date" : "2026-06-26 10:44:58 +0800", "id" : "171fd1314f696f7b19850c94412ff0177dc969ae", "msg" : "note_out:修改enable_expand_filter_用法.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator_by_container.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator_by_container.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "8c34332940e93a15b5aa2e5d3d91cd5040101e88", "timestamp" : 1782443196000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:增加各来源角度框的可视化.\u000a", "date" : "2026-06-26 11:06:36 +0800", "id" : "8c34332940e93a15b5aa2e5d3d91cd5040101e88", "msg" : "note_out:增加各来源角度框的可视化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "c4cb84808b70fd39a6effb1c1326f20e2fdd2323", "timestamp" : 1782458658000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:无参考角度初始角度估计优化.\u000a", "date" : "2026-06-26 15:24:18 +0800", "id" : "c4cb84808b70fd39a6effb1c1326f20e2fdd2323", "msg" : "note_out:无参考角度初始角度估计优化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" ], "commitId" : "7dfab4a0c240b9c01bed2b93863184fb6a2addd2", "timestamp" : 1782550243000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:无参考角度时车挂角度搜索第二套方法.\u000a", "date" : "2026-06-27 16:50:43 +0800", "id" : "7dfab4a0c240b9c01bed2b93863184fb6a2addd2", "msg" : "note_out:无参考角度时车挂角度搜索第二套方法.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_noise_filter.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_noise_filter.h" ], "commitId" : "22c5f3569b68280258bbbe69af5e64957d11bb2a", "timestamp" : 1782799317000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:修复无车周点时NoiseFilter车周栅格不更新空置状态的bug.\u000a", "date" : "2026-06-30 14:01:57 +0800", "id" : "22c5f3569b68280258bbbe69af5e64957d11bb2a", "msg" : "note_out:修复无车周点时NoiseFilter车周栅格不更新空置状态的bug.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_noise_filter.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_noise_filter.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" ], "commitId" : "94dd94dc0888b58605747708c7557f8b7d09a56a", "timestamp" : 1782804291000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:过滤岸桥轨道上的沟沿误检.\u000a", "date" : "2026-06-30 15:24:51 +0800", "id" : "94dd94dc0888b58605747708c7557f8b7d09a56a", "msg" : "note_out:过滤岸桥轨道上的沟沿误检.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "de16eb585abbefe5f682971819e8631c18900b26", "timestamp" : 1782886502000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:第二套无参考初始挂角查找优化.\u000a", "date" : "2026-07-01 14:15:02 +0800", "id" : "de16eb585abbefe5f682971819e8631c18900b26", "msg" : "note_out:第二套无参考初始挂角查找优化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "a49bdbec5501c6d3d8dc3a1bb7aea12111375784", "timestamp" : 1782888549000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "trailer front-edge: fix large-angle misclassify + logging + micro-opt\u000a\u000a- classify: replace |dx|vs|dy| small-angle heuristic with two-hypothesis\u000a (along/normal) picked by |y_tr| closeness to half-width; kills spurious\u000a +90deg at large trailer angles\u000a- add z-band gate to reject cargo-box side face (out of baffle height band)\u000a- selection by |y_tr|-to-half-width instead of longest extent\u000a- angle-compare log: initial_baffle / initial_front_edge / revised / ekf / detect\u000a- micro-opt: consider() takes precomputed fit (drop duplicate LS on single\u000a segment path); reserve cell vectors; std::move cell idx\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-07-01 14:49:09 +0800", "id" : "a49bdbec5501c6d3d8dc3a1bb7aea12111375784", "msg" : "trailer front-edge: fix large-angle misclassify + logging + micro-opt", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "c148e48894e3defac8dd0ba213ae854c37f88d3a", "timestamp" : 1782888781000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "trailer front-edge batch1: box-face channel + z-classification + fusion\u000a\u000aTreat box/body front face (tall grid cells above baffle height band) as a\u000asecond, parallel estimator of the same trailer angle instead of discarding it:\u000a\u000a- consider_box(): route runs whose z-top exceeds the baffle band to a\u000a box-face candidate; long straight wall -> dominant-axis classify\u000a (normal at small angle, along at large), keep the longest wall\u000a- fusion: prefer baffle (on-target height); fall back to box-face angle only\u000a when baffle route finds nothing (e.g. loaded trailer, baffle occluded) ->\u000a recovers cases that previously abstained (a7)\u000a- logging: per-candidate cand-box line; fuse line with th_baffle/th_box/src/out;\u000a RESULT now tags src=baffle|boxface\u000a- viz/out use fused final_a/final_b/final_side\u000a\u000aNOTE: not compile-verified in this environment (needs project Docker build).\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-07-01 14:53:01 +0800", "id" : "c148e48894e3defac8dd0ba213ae854c37f88d3a", "msg" : "trailer front-edge batch1: box-face channel + z-classification + fusion", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "993fd25cb44fe78e6177d342d84ff7bc77626854", "timestamp" : 1782889047000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "trailer front-edge batch2: raw-point fit + dual-side pooling + y-geo + confidence\u000a\u000a- fit_raw(): LS over raw points of the chosen segment (not the 4 grid\u000a centroids) to suppress the per-column max-x quantization bias that drove\u000a the ~-7deg systematic error at small angle (a4/a6)\u000a- dual-side pooling: gather baffle-height cells L/R, sum per-side de-meaned\u000a covariances -> shared face direction (does NOT connect the two centroids,\u000a so it is immune to the cross-side motion-compensation x offset); used to\u000a refine short baffle segments\u000a- y-position geometric fallback: cosθ=(cyL-cyR)/(2w) from known half-width,\u000a y-only (avoids polluted x); logged (sensitive at large angle only)\u000a- confidence scalar per source; logged in fuse/RESULT\u000a- new logs: batch2 pool (nL/nR/th_pool/th_geo_mag), batch2 refine\u000a (th_centroid/th_raw/th_pool/use_pool)\u000a\u000aBehavior change (intended): baffle final angle now comes from raw-point fit,\u000aor dual-side pool for short segments.\u000aNOTE: not compile-verified in this environment (needs project Docker build).\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-07-01 14:57:27 +0800", "id" : "993fd25cb44fe78e6177d342d84ff7bc77626854", "msg" : "trailer front-edge batch2: raw-point fit + dual-side pooling + y-geo + confidence", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", ".gitignore" ], "commitId" : "604f3af72501ca145261c00bb9c3c69fbd75bebf", "timestamp" : 1782892207000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:宝世顺去铁轨矮草散点.\u000a", "date" : "2026-07-01 15:50:07 +0800", "id" : "604f3af72501ca145261c00bb9c3c69fbd75bebf", "msg" : "note_out:宝世顺去铁轨矮草散点.", "paths" : [ { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" ], "commitId" : "c5c1c4aa9cd5bcb4cc168e58b3f4253a7d4e8277", "timestamp" : 1782896387000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台高柱检出区对行人标记为地图外.\u000a", "date" : "2026-07-01 16:59:47 +0800", "id" : "c5c1c4aa9cd5bcb4cc168e58b3f4253a7d4e8277", "msg" : "note_out:烟台高柱检出区对行人标记为地图外.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" ], "commitId" : "9cf0f88238a4743e0c5443d7ce7e8dec03dbfbe4", "timestamp" : 1782905202000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 矮柱近邻查找增加质心距离约束.\u000a", "date" : "2026-07-01 19:26:42 +0800", "id" : "9cf0f88238a4743e0c5443d7ce7e8dec03dbfbe4", "msg" : "note_out: 矮柱近邻查找增加质心距离约束.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "3e05f34a15a00748a015c15b01e925215d552145", "timestamp" : 1782905698000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 矮柱近邻查找质心距离约束0.2->0.25.\u000a", "date" : "2026-07-01 19:34:58 +0800", "id" : "3e05f34a15a00748a015c15b01e925215d552145", "msg" : "note_out: 矮柱近邻查找质心距离约束0.2->0.25.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp.bak_pillardbg", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" ], "commitId" : "e58d26eb2ccba90e35199f64bab39d2fd95a8fbf", "timestamp" : 1782971852000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:修改高柱栅格标记时域确认方式.\u000a", "date" : "2026-07-02 13:57:32 +0800", "id" : "e58d26eb2ccba90e35199f64bab39d2fd95a8fbf", "msg" : "note_out:修改高柱栅格标记时域确认方式.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "add", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp.bak_pillardbg" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp.bak_pillardbg" ], "commitId" : "d7255582c9247a3a513aae17a7b649c8b4b3ce79", "timestamp" : 1782971869000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:修改高柱栅格标记时域确认方式.\u000a", "date" : "2026-07-02 13:57:49 +0800", "id" : "d7255582c9247a3a513aae17a7b649c8b4b3ce79", "msg" : "note_out:修改高柱栅格标记时域确认方式.", "paths" : [ { "editType" : "delete", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp.bak_pillardbg" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" ], "commitId" : "adc0971d9184636224eec71ec82d2d563dfe497d", "timestamp" : 1782974222000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:高柱历史信息记录标记使用时间戳而非帧计数.\u000a", "date" : "2026-07-02 14:37:02 +0800", "id" : "adc0971d9184636224eec71ec82d2d563dfe497d", "msg" : "note_out:高柱历史信息记录标记使用时间戳而非帧计数.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "c28e223f7ecd9b75b8e841f5e109a5f1aaf0d197", "timestamp" : 1782996932000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:无初始角度适配小角度.\u000a", "date" : "2026-07-02 20:55:32 +0800", "id" : "c28e223f7ecd9b75b8e841f5e109a5f1aaf0d197", "msg" : "note_out:无初始角度适配小角度.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "f44deee08ac66081f464f97c6e139193fc47c648", "timestamp" : 1783040861000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:删除第一种求初始角度方法.\u000a", "date" : "2026-07-03 09:07:41 +0800", "id" : "f44deee08ac66081f464f97c6e139193fc47c648", "msg" : "note_out:删除第一种求初始角度方法.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "3ed18e667347bdd2aefeb08bf8461e50a24cc831", "timestamp" : 1783082842000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:初始角度查找.\u000a", "date" : "2026-07-03 20:47:22 +0800", "id" : "3ed18e667347bdd2aefeb08bf8461e50a24cc831", "msg" : "note_out:初始角度查找.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "c74d30ba8feb5b26d57fd0adda237206612317ed", "timestamp" : 1783344172000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:修改暂存.\u000a", "date" : "2026-07-06 21:22:52 +0800", "id" : "c74d30ba8feb5b26d57fd0adda237206612317ed", "msg" : "note_out:修改暂存.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "0c452d76483bcf93c0339ecced5e0d351524f788", "timestamp" : 1783414502000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "龙须点里不满足细线的点抛弃\u000a", "date" : "2026-07-07 16:55:02 +0800", "id" : "0c452d76483bcf93c0339ecced5e0d351524f788", "msg" : "龙须点里不满足细线的点抛弃", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_data_provider.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "d8566320b9abb4a995430bf4e02f08b995d7ba10", "timestamp" : 1783415701000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台增加立体车库防护功能:高墙面拟合输出110点.\u000a", "date" : "2026-07-07 17:15:01 +0800", "id" : "d8566320b9abb4a995430bf4e02f08b995d7ba10", "msg" : "note_out:烟台增加立体车库防护功能:高墙面拟合输出110点.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_data_provider.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "d609bd5e22e2e69626c9d776f35855c489ac87d2", "timestamp" : 1783420946000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "龙须点线粗细约束&&x向和z向的离群值剔除\u000a", "date" : "2026-07-07 18:42:26 +0800", "id" : "d609bd5e22e2e69626c9d776f35855c489ac87d2", "msg" : "龙须点线粗细约束&&x向和z向的离群值剔除", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "ce780e4d857cf961bc78fe5ecfeffb238223de07", "timestamp" : 1783424576000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:大榭像素42区域低矮障碍物点加入102点.\u000a", "date" : "2026-07-07 19:42:56 +0800", "id" : "ce780e4d857cf961bc78fe5ecfeffb238223de07", "msg" : "note_out:大榭像素42区域低矮障碍物点加入102点.", "paths" : [ { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "0e7fe849120badb96e60970b8b1b4162b4767aab", "timestamp" : 1783488783000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:无初始角度时估计车挂初始角度v3最终版.\u000a", "date" : "2026-07-08 13:33:03 +0800", "id" : "0e7fe849120badb96e60970b8b1b4162b4767aab", "msg" : "note_out:无初始角度时估计车挂初始角度v3最终版.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "6fc6595914a0479803f2fbf646d74ca92c984af9", "timestamp" : 1783491643000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:调节箱面角度的置信度.\u000a", "date" : "2026-07-08 14:20:43 +0800", "id" : "6fc6595914a0479803f2fbf646d74ca92c984af9", "msg" : "note_out:调节箱面角度的置信度.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "98da2b6285f63d72593fdeac0b8e758bdce4056a", "timestamp" : 1783495258000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:双侧挡流板面拟合角度值相互校验条件放松.\u000a", "date" : "2026-07-08 15:20:58 +0800", "id" : "98da2b6285f63d72593fdeac0b8e758bdce4056a", "msg" : "note_out:双侧挡流板面拟合角度值相互校验条件放松.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "1647ebe4c60ed3f92a5fca9e760cdc48d428556b", "timestamp" : 1783496936000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:车挂日志打印条件修改.\u000a", "date" : "2026-07-08 15:48:56 +0800", "id" : "1647ebe4c60ed3f92a5fca9e760cdc48d428556b", "msg" : "note_out:车挂日志打印条件修改.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "8d6c69e459f8be7329557db7f2786d048b8312ad", "timestamp" : 1783497617000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:恢复仅无初始车挂角时才调用周围搜索.\u000a", "date" : "2026-07-08 16:00:17 +0800", "id" : "8d6c69e459f8be7329557db7f2786d048b8312ad", "msg" : "note_out:恢复仅无初始车挂角时才调用周围搜索.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "\"dld_trailer_calibrator\\344\\274\\230\\345\\214\\226\\346\\270\\205\\345\\215\\225.md\"", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/common/common_types.h" ], "commitId" : "4169003e83b1b19b7ebf35aafb974d69e8f8dc14", "timestamp" : 1783510267000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 挡流板置信度校验去除score1,2逻辑&&代码优化.\u000a", "date" : "2026-07-08 19:31:07 +0800", "id" : "4169003e83b1b19b7ebf35aafb974d69e8f8dc14", "msg" : "note_out: 挡流板置信度校验去除score1,2逻辑&&代码优化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "add", "file" : "\"dld_trailer_calibrator\\344\\274\\230\\345\\214\\226\\346\\270\\205\\345\\215\\225.md\"" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "\"dld_trailer_calibrator\\344\\274\\230\\345\\214\\226\\346\\270\\205\\345\\215\\225.md\"" ], "commitId" : "340b7bd70a1a86ce12b2826e2919ee1c539b9137", "timestamp" : 1783510309000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 挡流板置信度校验去除score1,2逻辑&&代码优化.\u000a", "date" : "2026-07-08 19:31:49 +0800", "id" : "340b7bd70a1a86ce12b2826e2919ee1c539b9137", "msg" : "note_out: 挡流板置信度校验去除score1,2逻辑&&代码优化.", "paths" : [ { "editType" : "delete", "file" : "\"dld_trailer_calibrator\\344\\274\\230\\345\\214\\226\\346\\270\\205\\345\\215\\225.md\"" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "c48305a611e75cbc9482eb185b4baa9efafd31b1", "timestamp" : 1783522404000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:参数修改.\u000a", "date" : "2026-07-08 22:53:24 +0800", "id" : "c48305a611e75cbc9482eb185b4baa9efafd31b1", "msg" : "note_out:参数修改.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "7957ecd966565c5c0e479d2ee67778b96c8b36ab", "timestamp" : 1783526367000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@denior.auto", "comment" : "note_out:增加箱体面计算挂角的注释.\u000a", "date" : "2026-07-08 23:59:27 +0800", "id" : "7957ecd966565c5c0e479d2ee67778b96c8b36ab", "msg" : "note_out:增加箱体面计算挂角的注释.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "74603f14be3460fb818962e981ccc1e826f45661", "timestamp" : 1783571545000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:拟合改为pca,增加箱体面角度y向箱宽校验.\u000a", "date" : "2026-07-09 12:32:25 +0800", "id" : "74603f14be3460fb818962e981ccc1e826f45661", "msg" : "note_out:拟合改为pca,增加箱体面角度y向箱宽校验.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "doc/trailer_angle_log_analysis_a1a9_20260709.md", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "2cb3e42ded2425b88a3c6706edc0d550c321e318", "timestamp" : 1783578330000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:pca去噪点改为单次.\u000a", "date" : "2026-07-09 14:25:30 +0800", "id" : "2cb3e42ded2425b88a3c6706edc0d550c321e318", "msg" : "note_out:pca去噪点改为单次.", "paths" : [ { "editType" : "add", "file" : "doc/trailer_angle_log_analysis_a1a9_20260709.md" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "doc/trailer_angle_log_analysis_a1a9_20260709.md", "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" ], "commitId" : "7b9576dd4be88ea2f09ffaaa4443e81fc3e96bed", "timestamp" : 1783580169000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:调试日志,topic清理和隐藏.\u000a", "date" : "2026-07-09 14:56:09 +0800", "id" : "7b9576dd4be88ea2f09ffaaa4443e81fc3e96bed", "msg" : "note_out:调试日志,topic清理和隐藏.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "delete", "file" : "doc/trailer_angle_log_analysis_a1a9_20260709.md" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h", "perception/common/common_types.h" ], "commitId" : "e115495f9fb7c7011e95e0f9b7ef262ab5fd4358", "timestamp" : 1783590982000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:箱面半宽调整.\u000a", "date" : "2026-07-09 17:56:22 +0800", "id" : "e115495f9fb7c7011e95e0f9b7ef262ab5fd4358", "msg" : "note_out:箱面半宽调整.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_trailer_calibrator.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_trailer_calibrator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/services/seg_obstacle_step.h", "perception/ground_segmentation/common/data_injector.cpp", "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp", "perception/ground_segmentation/components/seg_obstacle.cpp", "perception/ground_segmentation/components/seg_ground.cpp", "perception/ground_segmentation/services/seg_ground_alg_plus.h", "perception/ground_segmentation/common/basic_types.h", "perception/ground_segmentation/common/grd_utils.cpp", "perception/ground_segmentation/services/impl/seg_obstacle_step.cpp", "perception/ground_segmentation/services/impl/seg_ground_step.cpp", "perception/ground_segmentation/common/data_injector.h", "perception/ground_segmentation/services/seg_ground_step.h" ], "commitId" : "1f1de8a5a04bdfabea348e7a05d980db2407614b", "timestamp" : 1783677573000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:坑洼检测地面分割后处理: 突变点检测,地面地下点粗标签标记.\u000a", "date" : "2026-07-10 17:59:33 +0800", "id" : "1f1de8a5a04bdfabea348e7a05d980db2407614b", "msg" : "note_out:坑洼检测地面分割后处理: 突变点检测,地面地下点粗标签标记.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/components/seg_ground.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/seg_ground_alg_plus.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_obstacle_step.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/data_injector.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/basic_types.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/components/seg_obstacle.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/seg_ground_step.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/grd_utils.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/seg_obstacle_step.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/data_injector.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_step.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" ], "commitId" : "af602919b9646bbc97589bb35f7c4ce275a009d9", "timestamp" : 1783682548000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "围栏点也经龙须点筛选标记\u000a", "date" : "2026-07-10 19:22:28 +0800", "id" : "af602919b9646bbc97589bb35f7c4ce275a009d9", "msg" : "围栏点也经龙须点筛选标记", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/common/common_types.h" ], "commitId" : "873ef82b3becd4d285d92c297366b0649a51bda1", "timestamp" : 1783685437000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "参数控制是否使用“收紧龙须点”的规则，洋浦不收紧\u000a", "date" : "2026-07-10 20:10:37 +0800", "id" : "873ef82b3becd4d285d92c297366b0649a51bda1", "msg" : "参数控制是否使用“收紧龙须点”的规则，洋浦不收紧", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp", "perception/ground_segmentation/services/seg_ground_alg_plus.h" ], "commitId" : "97ac2b432c9dbb1c02cd7aebb0f40e1da7fc9ffe", "timestamp" : 1783687258000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 优化地面分割后处理:聚类和分类逻辑优化.\u000a", "date" : "2026-07-10 20:40:58 +0800", "id" : "97ac2b432c9dbb1c02cd7aebb0f40e1da7fc9ffe", "msg" : "note_out: 优化地面分割后处理:聚类和分类逻辑优化.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/seg_ground_alg_plus.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp", "perception/ground_segmentation/services/seg_ground_alg_plus.h" ], "commitId" : "a28e10bfe9f323541a2bb8c7c39e0441a93bba1c", "timestamp" : 1783913000000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: seg坑沿点辨识优化.\u000a", "date" : "2026-07-13 11:23:20 +0800", "id" : "a28e10bfe9f323541a2bb8c7c39e0441a93bba1c", "msg" : "note_out: seg坑沿点辨识优化.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/seg_ground_alg_plus.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" ], "commitId" : "774420d69d71283d6e861d64421d0b1e8245e570", "timestamp" : 1783914438000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:seg判坑簇修改条件.\u000a", "date" : "2026-07-13 11:47:18 +0800", "id" : "774420d69d71283d6e861d64421d0b1e8245e570", "msg" : "note_out:seg判坑簇修改条件.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/common/publisher_utils.h", "perception/ground_segmentation/services/impl/seg_obstacle_step.cpp" ], "commitId" : "c8486a4ce688fd00b9eb6de5dc412cbc24528c04", "timestamp" : 1784706792000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:增加梁山后向雷达输出显示topic.\u000a", "date" : "2026-07-22 15:53:12 +0800", "id" : "c8486a4ce688fd00b9eb6de5dc412cbc24528c04", "msg" : "note_out:增加梁山后向雷达输出显示topic.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_obstacle_step.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/publisher_utils.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "94e9c65134bda3d3ac83f2bd6eeb77e1d24241eb", "timestamp" : 1784723729000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:魏桥og点柳树过滤.\u000a", "date" : "2026-07-22 20:35:29 +0800", "id" : "94e9c65134bda3d3ac83f2bd6eeb77e1d24241eb", "msg" : "note_out:魏桥og点柳树过滤.", "paths" : [ { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "83258da18869a6b76aa61f2d44f6ba4fa860b4c7", "timestamp" : 1784724879000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:魏桥og点柳树过滤.\u000a", "date" : "2026-07-22 20:54:39 +0800", "id" : "83258da18869a6b76aa61f2d44f6ba4fa860b4c7", "msg" : "note_out:魏桥og点柳树过滤.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h" ], "commitId" : "3b933fd3043ac163d2a58a11dc0b48f0e22fe13b", "timestamp" : 1784725435000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:willow_hang_z默认改成4.5, 防误用.\u000a", "date" : "2026-07-22 21:03:55 +0800", "id" : "3b933fd3043ac163d2a58a11dc0b48f0e22fe13b", "msg" : "note_out:willow_hang_z默认改成4.5, 防误用.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp", "perception/dl_detection/lidar/impl/dld_suf_impl.cpp", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "doc/yaw_pipeline.md", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_detection_postprocessor.cpp" ], "commitId" : "eabb1c0f8854448a1dcf1d08f1974311898d3b09", "timestamp" : 1784789436000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:增加dl输出角度的保存和可视化输出.\u000a", "date" : "2026-07-23 14:50:36 +0800", "id" : "eabb1c0f8854448a1dcf1d08f1974311898d3b09", "msg" : "note_out:增加dl输出角度的保存和可视化输出.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_postprocessor.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_suf_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "add", "file" : "doc/yaw_pipeline.md" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lib/obstacle_tracking/box_refiner.cpp", "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" ], "commitId" : "acf8438e19260c301ca2660717ab14b34ebd3130", "timestamp" : 1784794238000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:堆高机正面吊取消速度纠正box heading.\u000a", "date" : "2026-07-23 16:10:38 +0800", "id" : "acf8438e19260c301ca2660717ab14b34ebd3130", "msg" : "note_out:堆高机正面吊取消速度纠正box heading.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/box_refiner.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h" ], "commitId" : "9ad41a6f2d31653bfb01010b9e3ab12103b57a68", "timestamp" : 1784804323000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:铁路堆场路沿点增加时域叠加功能.\u000a", "date" : "2026-07-23 18:58:43 +0800", "id" : "9ad41a6f2d31653bfb01010b9e3ab12103b57a68", "msg" : "note_out:铁路堆场路沿点增加时域叠加功能.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/common/basic_types.h", "perception/ground_segmentation/common/grd_utils.cpp", "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" ], "commitId" : "e71a79dfcdac2552650c3c752ff6a939343a276d", "timestamp" : 1784858936000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:地磅/沟沿/路沿检出车身屏蔽区提取为参数.\u000a", "date" : "2026-07-24 10:08:56 +0800", "id" : "e71a79dfcdac2552650c3c752ff6a939343a276d", "msg" : "note_out:地磅/沟沿/路沿检出车身屏蔽区提取为参数.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/common/basic_types.h" }, { "editType" : "edit", "file" : "perception/ground_segmentation/common/grd_utils.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_ground_alg_plus.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/utils/dld_map_mask_util.cpp", "perception/dl_detection/utils/dld_map_mask_util.h", "perception/dl_detection/params/obstacle_detection_param_dx.yaml", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_detection_postprocessor.cpp" ], "commitId" : "e1cb321a904cdfad9d34223c78c365b7472a4fd5", "timestamp" : 1784892899000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:new_detection的地图显示增加像素相关着色&&增加map系密集栅格等间距格点云输出&&增加魏桥柳树矮枝像素和过滤方法.\u000a", "date" : "2026-07-24 19:34:59 +0800", "id" : "e1cb321a904cdfad9d34223c78c365b7472a4fd5", "msg" : "note_out:new_detection的地图显示增加像素相关着色&&增加map系密集栅格等间距格点云输出&&增加魏桥柳树矮枝像素和过滤方法.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/params/obstacle_detection_param_dx.yaml" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/utils/dld_map_mask_util.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_postprocessor.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/utils/dld_map_mask_util.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "49224128b5e352a2a2725bee523a6cce87a09b69", "timestamp" : 1784895663000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:魏桥柳树区不做未定义点捞回.\u000a", "date" : "2026-07-24 20:21:03 +0800", "id" : "49224128b5e352a2a2725bee523a6cce87a09b69", "msg" : "note_out:魏桥柳树区不做未定义点捞回.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "2ac49b10038d434a80926fe006876ab961730edd", "timestamp" : 1784896981000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "nogte_out:去掉调试代码.\u000a", "date" : "2026-07-24 20:43:01 +0800", "id" : "2ac49b10038d434a80926fe006876ab961730edd", "msg" : "nogte_out:去掉调试代码.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp", "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h" ], "commitId" : "5b9e8b302b33515d771f861008e34eca2e6e0def", "timestamp" : 1784997139000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@denior.auto", "comment" : "note_out:路口和道路内35米内不触发box refiner.\u000a", "date" : "2026-07-26 00:32:19 +0800", "id" : "5b9e8b302b33515d771f861008e34eca2e6e0def", "msg" : "note_out:路口和道路内35米内不触发box refiner.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h", "perception/dl_detection/common/dld_utils.cpp", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h" ], "commitId" : "5054569d50da0fccd833d81a25b818d653e47482", "timestamp" : 1785052551000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@denior.auto", "comment" : "note_out:振石窄且短地磅时域叠加策略.\u000a", "date" : "2026-07-26 15:55:51 +0800", "id" : "5054569d50da0fccd833d81a25b818d653e47482", "msg" : "note_out:振石窄且短地磅时域叠加策略.", "paths" : [ { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_utils.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_utils.cpp" ], "commitId" : "c0902d72919f5a9b82590a8eb8dc83fe1da65350", "timestamp" : 1785054599000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@denior.auto", "comment" : "note_out:删除调试时的错误map_origin赋值.\u000a", "date" : "2026-07-26 16:29:59 +0800", "id" : "c0902d72919f5a9b82590a8eb8dc83fe1da65350", "msg" : "note_out:删除调试时的错误map_origin赋值.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_utils.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/params/model" ], "commitId" : "2cb32f7d64484ef65ce2317fc4a167b2cd26507e", "timestamp" : 1785146174000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:前港cp更新135k模型,更新submodule model指针[新增sweeper/sprinkler/car类别].\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-07-27 17:56:14 +0800", "id" : "2cb32f7d64484ef65ce2317fc4a167b2cd26507e", "msg" : "note_out:前港cp更新135k模型,更新submodule model指针[新增sweeper/sprinkler/car类别].", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/params/model" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.h", "perception/dl_detection/lidar/impl/dld_suf_impl.cpp", "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp", "perception/dl_detection/common/dld_params_config.h", "perception/common/constant.h", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_filter_sets.h", "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp", "perception/dl_detection/lib/obstacle_tracking/tracking_common.cpp", "perception/common/common_types.h" ], "commitId" : "42b2c5c0e7492b2a98e8f7e37250f0132edf9b0b", "timestamp" : 1785154628000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:前港新模型更新,洒水车和清扫车新类别适配.\u000a", "date" : "2026-07-27 20:17:08 +0800", "id" : "42b2c5c0e7492b2a98e8f7e37250f0132edf9b0b", "msg" : "note_out:前港新模型更新,洒水车和清扫车新类别适配.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_filter_sets.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.h" }, { "editType" : "edit", "file" : "perception/common/constant.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/tracking_common.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_suf_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" ], "commitId" : "c3f6835f162e6984b713e125e569ef0bea0d7925", "timestamp" : 1785222727000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 铁路堆场出口像素53添加过滤和稳定逻辑.\u000a", "date" : "2026-07-28 15:12:07 +0800", "id" : "c3f6835f162e6984b713e125e569ef0bea0d7925", "msg" : "note_out: 铁路堆场出口像素53添加过滤和稳定逻辑.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_ditch_line_handler.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" ], "commitId" : "fbc856765d2a60c5d1fa9eddd8ec3aed8373cecd", "timestamp" : 1785313010000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:路沿时域叠加端点排查日志(注释版).\u000a", "date" : "2026-07-29 16:16:50 +0800", "id" : "fbc856765d2a60c5d1fa9eddd8ec3aed8373cecd", "msg" : "note_out:路沿时域叠加端点排查日志(注释版).", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/ground_segmentation/services/impl/seg_transform_step.cpp", "perception/ground_segmentation/common/grd_utils.cpp", ".gitignore", "perception/common/utils.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "5714c0f82a9c93ad25a7331d841c913dfdd2746b", "timestamp" : 1785330407000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:extra NROI加高度范围参数.\u000a", "date" : "2026-07-29 21:06:47 +0800", "id" : "5714c0f82a9c93ad25a7331d841c913dfdd2746b", "msg" : "note_out:extra NROI加高度范围参数.", "paths" : [ { "editType" : "edit", "file" : "perception/ground_segmentation/common/grd_utils.cpp" }, { "editType" : "edit", "file" : "perception/common/utils.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/ground_segmentation/services/impl/seg_transform_step.cpp" }, { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" ], "commitId" : "0ac5e339c1cbc84c29839af28368a9a5f8d61884", "timestamp" : 1785385815000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:宝世顺铁路堆场路沿ROI过滤参数(curb_filter_roi_utm,借像素53过滤逻辑).\u000a\u000a新增curb_filter_roi_utm(UTM多边形)参数,在像素53过滤位置对落在ROI内的路沿点一并过滤不输出.\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-07-30 12:30:15 +0800", "id" : "0ac5e339c1cbc84c29839af28368a9a5f8d61884", "msg" : "note_out:宝世顺铁路堆场路沿ROI过滤参数(curb_filter_roi_utm,借像素53过滤逻辑).", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_debug_info.h", "perception/dl_detection/utils/dld_visualization_debug.cpp", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "8441243de6ca010809b73bd374d3a9eac38efa7b", "timestamp" : 1785397936000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:下一时刻过滤框可视化.\u000a", "date" : "2026-07-30 15:52:16 +0800", "id" : "8441243de6ca010809b73bd374d3a9eac38efa7b", "msg" : "note_out:下一时刻过滤框可视化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_debug_info.h" }, { "editType" : "edit", "file" : "perception/dl_detection/utils/dld_visualization_debug.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/common/dld_params_config.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/common/common_types.h" ], "commitId" : "3853d8a7497e55eda4b0b067f92a495ab95ae1cd", "timestamp" : 1785416834000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台车内点聚类初步实现.\u000a", "date" : "2026-07-30 21:07:14 +0800", "id" : "3853d8a7497e55eda4b0b067f92a495ab95ae1cd", "msg" : "note_out:烟台车内点聚类初步实现.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" ], "commitId" : "447765c997dcc1e0b0670680d8bc2392163b9042", "timestamp" : 1785470562000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台自车内聚类优化.\u000a", "date" : "2026-07-31 12:02:42 +0800", "id" : "447765c997dcc1e0b0670680d8bc2392163b9042", "msg" : "note_out:烟台自车内聚类优化.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/services/impl/dld_sensor_msg_manager.cpp", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp", "perception/dl_detection/services/dld_sensor_msg_manager.h", "perception/common/ros_types.h", "perception/dl_detection/services/impl/dld_vehicle.cpp", "perception/dl_detection/services/dld_vehicle.h" ], "commitId" : "2da2985821a477bf2ee16e67883235f7267860bc", "timestamp" : 1785479294000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:接入载车状态消息,控制是否开启自车内聚类和112点标记输出.\u000a", "date" : "2026-07-31 14:28:14 +0800", "id" : "2da2985821a477bf2ee16e67883235f7267860bc", "msg" : "note_out:接入载车状态消息,控制是否开启自车内聚类和112点标记输出.", "paths" : [ { "editType" : "edit", "file" : "perception/common/ros_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/services/dld_sensor_msg_manager.h" }, { "editType" : "edit", "file" : "perception/dl_detection/services/impl/dld_sensor_msg_manager.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/services/impl/dld_vehicle.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/services/dld_vehicle.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "873254f946227a4eb1ad9a33964f323f933e997c", "timestamp" : 1785492431000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out: 107点的z最低阈值恢复0.1米.\u000a", "date" : "2026-07-31 18:07:11 +0800", "id" : "873254f946227a4eb1ad9a33964f323f933e997c", "msg" : "note_out: 107点的z最低阈值恢复0.1米.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/params/model" ], "commitId" : "833eb6150e9691065868742ade1b64b49c0972c7", "timestamp" : 1785565067000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@denior.auto", "comment" : "note_out:梁山更新专有模型.\u000a", "date" : "2026-08-01 14:17:47 +0800", "id" : "833eb6150e9691065868742ade1b64b49c0972c7", "msg" : "note_out:梁山更新专有模型.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/params/model" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/params/model" ], "commitId" : "9f01ddfb0987e1f939b8ac1f56c65ffd82b1913e", "timestamp" : 1785754098000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:前港集卡车头高分阈值0.4->0.55.\u000a", "date" : "2026-08-03 18:48:18 +0800", "id" : "9f01ddfb0987e1f939b8ac1f56c65ffd82b1913e", "msg" : "note_out:前港集卡车头高分阈值0.4->0.55.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/params/model" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "84b3426131c654dcb84ee1104a7669cc848f015b", "timestamp" : 1785903837000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "转向角一个超阈值则整组去框\u000a", "date" : "2026-08-05 12:23:57 +0800", "id" : "84b3426131c654dcb84ee1104a7669cc848f015b", "msg" : "转向角一个超阈值则整组去框", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tools/replay_script/.gitignore", "tools/replay_script/run_perception.sh", "tools/replay_script/deploy.env.example", "tools/replay_script/driver_config.yaml", "tools/replay_script/config.yaml", "tools/replay_script/README.md", "tools/replay_script/clone_new_detection.sh", "CMakeLists.txt", "tools/replay_script/run_driver.sh" ], "commitId" : "0a3bf1ab7003745db20cf3de9931988b2a1367e5", "timestamp" : 1786101244000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "feat(replay_script): 部署脚本相对路径化 + 驱动目录env注入 + 克隆脚本\u000a\u000a- run_driver.sh: 配置走相对路径；驱动靠 SETUP_ 环境变量 source（无硬编码/无搜索），\u000a hesai 外参用 rospack find 推导；新增 --dry-run/--background\u000a- run_perception.sh: 相对化，自动上溯定位 share/perception，/senior 收敛为 SENIOR_ROOT，新增 --dry-run\u000a- 新增 clone_new_detection.sh（加固版 worktree 克隆）、deploy.env.example、.gitignore、README\u000a- driver_config.yaml: imv_4pxt32_2rsbp4 改指非bp4 imv launch（BP3/BP4自动判型合用）\u000a- CMakeLists: 安装 tools/replay_script 到 share/perception/tools/replay_script\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-08-07 19:14:04 +0800", "id" : "0a3bf1ab7003745db20cf3de9931988b2a1367e5", "msg" : "feat(replay_script): 部署脚本相对路径化 + 驱动目录env注入 + 克隆脚本", "paths" : [ { "editType" : "edit", "file" : "tools/replay_script/driver_config.yaml" }, { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "tools/replay_script/config.yaml" }, { "editType" : "add", "file" : "tools/replay_script/deploy.env.example" }, { "editType" : "add", "file" : "tools/replay_script/clone_new_detection.sh" }, { "editType" : "edit", "file" : "tools/replay_script/README.md" }, { "editType" : "edit", "file" : "tools/replay_script/run_perception.sh" }, { "editType" : "edit", "file" : "tools/replay_script/run_driver.sh" }, { "editType" : "add", "file" : "tools/replay_script/.gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tools/replay_script/README.md" ], "commitId" : "38084d4fd9205aa80ec04f27c465c0929e2c7311", "timestamp" : 1786102457000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "docs(replay_script): README 补充感知安装路径设置，更新过时注意项\u000a\u000a- 快速开始新增“感知安装路径”步骤（PERCEPTION_SHARE/PERCEPTION_SETUP/SENIOR_ROOT）\u000a- run_perception.sh 段落说明非 install 内运行需显式设 PERCEPTION_SHARE\u000a- 环境变量表标注感知安装/系统根相关项\u000a- 注意项更新：2 个 launch 已推送；改列缺失的 5 个感知档分支\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-08-07 19:34:17 +0800", "id" : "38084d4fd9205aa80ec04f27c465c0929e2c7311", "msg" : "docs(replay_script): README 补充感知安装路径设置，更新过时注意项", "paths" : [ { "editType" : "edit", "file" : "tools/replay_script/README.md" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore", "perception/dl_detection/common/dld_params_config.h", "perception/lib/geometry/bbox_tracking.cpp", "perception/dl_detection/lib/obstacle_tracking/box_refiner.h", "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp", "perception/dl_detection/lib/obstacle_tracking/box_refiner.cpp", "perception/common/common_types.h" ], "commitId" : "7a0eaf9e55781bdf71e3da4db282d022ddbffaaf", "timestamp" : 1786437189000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:前港洒水车和清扫车类别稳定策略.\u000a", "date" : "2026-08-11 16:33:09 +0800", "id" : "7a0eaf9e55781bdf71e3da4db282d022ddbffaaf", "msg" : "note_out:前港洒水车和清扫车类别稳定策略.", "paths" : [ { "editType" : "edit", "file" : "perception/lib/geometry/bbox_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/box_refiner.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/obstacle_tracking.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "perception/dl_detection/lib/obstacle_tracking/box_refiner.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "7717cd52c63e4e20e4046b0c979ddf9e405bcb96", "timestamp" : 1786448894000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台新过滤策略.\u000a", "date" : "2026-08-11 19:48:14 +0800", "id" : "7717cd52c63e4e20e4046b0c979ddf9e405bcb96", "msg" : "note_out:烟台新过滤策略.", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/common/dld_params_config.h", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "54cb49428e06702c385f4472ae6e6e0ce725f9bc", "timestamp" : 1786451008000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, "authorEmail" : "tangxiao@senior.auto", "comment" : "note_out:烟台新加过滤策略先触发录包搜集信息.\u000a", "date" : "2026-08-11 20:23:28 +0800", "id" : "54cb49428e06702c385f4472ae6e6e0ce725f9bc", "msg" : "note_out:烟台新加过滤策略先触发录包搜集信息.", "paths" : [ { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/common/dld_params_config.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_suf_impl.cpp", "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp", "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h", "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp", "perception/common/common_types.h", "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "ef5b6b29ea0592df7b4c47c9ce751c0d8e7c582a", "timestamp" : 1786451026000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "梁山洗车间谁水花过滤\u000a", "date" : "2026-08-11 20:23:46 +0800", "id" : "ef5b6b29ea0592df7b4c47c9ce751c0d8e7c582a", "msg" : "梁山洗车间谁水花过滤", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_suf_impl.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_detection_tracking_processor.cpp" }, { "editType" : "edit", "file" : "perception/common/common_types.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/include/dld_pre_suf_set/dld_og_around_service.h" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_ditch_line_handler.cpp" }, { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" ], "commitId" : "6330991ad19ce48d6b95236baf7afea12e5996a8", "timestamp" : 1786452229000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, "authorEmail" : "liuwenjing@senior.auto", "comment" : "调整洗车间过滤距离阈值\u000a", "date" : "2026-08-11 20:43:49 +0800", "id" : "6330991ad19ce48d6b95236baf7afea12e5996a8", "msg" : "调整洗车间过滤距离阈值", "paths" : [ { "editType" : "edit", "file" : "perception/dl_detection/lidar/impl/dld_og_around_impl.cpp" } ] } ], "kind" : "git" } ], "culprits" : [ { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/lanxiaosong", "fullName" : "lanxiaosong" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangxiao", "fullName" : "tangxiao" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/caoxue", "fullName" : "caoxue" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/matao", "fullName" : "matao" } ], "nextBuild" : None, "previousBuild" : { "number" : 292, "url" : "http://159.27.114.184:8080/jenkins/user/yangyuxing/my-views/view/all/job/orin-slave64/292/" } }