{ "_class" : "org.jenkinsci.plugins.workflow.job.WorkflowRun", "actions" : [ { "_class" : "hudson.model.ParametersAction", "parameters" : [ { "_class" : "hudson.model.StringParameterValue", "name" : "orin", "value" : "master" }, { "_class" : "hudson.model.StringParameterValue", "name" : "confList", "value" : "Get-Branchs" }, { "_class" : "hudson.model.StringParameterValue", "name" : "conf", "value" : "Could not get conf for confList" }, { "_class" : "hudson.model.StringParameterValue", "name" : "checkall", "value" : "yes" }, { "_class" : "hudson.model.StringParameterValue", "name" : "OTA", "value" : "public" }, { "_class" : "hudson.model.StringParameterValue", "name" : "region", "value" : "all" }, { "_class" : "hudson.model.StringParameterValue", "name" : "deviceChoice", "value" : "false" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msgBranch", "value" : "rc_dev_xilian" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rslidarSDKBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cameraDriverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "loginSyncToolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemRosBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "thirdpartyBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "unifiedSystemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rosBridgeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdcontrolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "versionsObserverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cacheBagNodeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "performanceAnalystBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "scheduleManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rcinterpreterBranch", "value" : "feat_xilian" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rminterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerOnlineBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rtspRelayerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hesaiLidarBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newTruckSpreaderDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapInterfaceBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "staticTransformBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfLocBranch", "value" : "test_qingdao" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfAssistantBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "peripheralControllerBranch", "value" : "feat_xilian" }, { "_class" : "hudson.model.StringParameterValue", "name" : "laneDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "dataCollectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "tosVisualizeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "sinsCalibrationHmiBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "toolsBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "segmentationBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapCloudBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerHmiBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "pncBranch", "value" : "feat_pnc_status" }, { "_class" : "hudson.model.StringParameterValue", "name" : "controlBranch", "value" : "feat_pnc_status" }, { "_class" : "hudson.model.StringParameterValue", "name" : "calibrationToolsBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "groundmarkerDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "snapshotUploadBranch", "value" : "dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "spreaderSegmentationBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "perceptionPublisherBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "avmBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "v2Branch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "craneAlignBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newDetectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "seniorCalibrationBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "doxBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "warningModuleBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "imvSpreaderDetectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "mrpt2Branch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lidarCameraFusionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "guardianBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "predictionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "operate", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "orinConf", "value" : "master" }, { "_class" : "hudson.model.StringParameterValue", "name" : "editConfName", "value" : "" }, { "_class" : "hudson.model.StringParameterValue", "name" : "notes", "value" : "西联全量" }, { "_class" : "hudson.model.StringParameterValue", "name" : "users", "value" : "" } ] }, { "_class" : "hudson.model.CauseAction", "causes" : [ { "_class" : "hudson.model.Cause$UserIdCause", "shortDescription" : "Started by user suyalei", "userId" : "suyalei", "userName" : "suyalei" } ] }, { "_class" : "org.jenkinsci.plugins.workflow.libs.LibrariesAction" }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "branch" : [ { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "name" : "master" } ] }, "revision" : { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "branch" : [ { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "name" : "master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "branch" : [ { "SHA1" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "name" : "master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinslib.git" ], "scmName" : "" }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.EnvActionImpl" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "branch" : [ { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "name" : "refs/remotes/origin/master" } ] }, "revision" : { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "branch" : [ { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "name" : "refs/remotes/origin/master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "branch" : [ { "SHA1" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "name" : "refs/remotes/origin/master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinsfiles.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat-peripheral_op_state-chassis_err" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 105, "buildResult" : None, "marked" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] }, "revision" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] } }, "origin/rc_dev_d0713c" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 154, "buildResult" : None, "marked" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] }, "revision" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] } }, "origin/rc_dev_baoshishun" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 242, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_baoshishun" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_baoshishun" } ] } }, "origin/rc_dev_xiamen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 218, "buildResult" : None, "marked" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/rc_dev_xiamen" } ] }, "revision" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/rc_dev_xiamen" } ] } }, "origin/rc_dev_dongfen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 250, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_dongfen" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_dongfen" } ] } }, "origin/rc_dev_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "branch" : [ { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "name" : "origin/rc_dev_xilian" } ] }, "revision" : { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "branch" : [ { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "name" : "origin/rc_dev_xilian" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "branch" : [ { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "branch" : [ { "SHA1" : "a81b746aacc8e5c4dacebdc1c8b2e890196607b1", "name" : "origin/dev" } ] } }, "origin/feat_monitor_frame" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 94, "buildResult" : None, "marked" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] }, "revision" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] } }, "origin/rcdev_0a13c34" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] }, "revision" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] } }, "origin/rc_dev_yantaigunzhuang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 253, "buildResult" : None, "marked" : { "SHA1" : "185867dfaf4bb074885954fe648b988b157771b7", "branch" : [ { "SHA1" : "185867dfaf4bb074885954fe648b988b157771b7", "name" : "origin/rc_dev_yantaigunzhuang" } ] }, "revision" : { "SHA1" : "185867dfaf4bb074885954fe648b988b157771b7", "branch" : [ { "SHA1" : "185867dfaf4bb074885954fe648b988b157771b7", "name" : "origin/rc_dev_yantaigunzhuang" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 251, "buildResult" : None, "marked" : { "SHA1" : "d8e22bed0aa0bb7a427ad467caeb4816952ef2b4", "branch" : [ { "SHA1" : "d8e22bed0aa0bb7a427ad467caeb4816952ef2b4", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "d8e22bed0aa0bb7a427ad467caeb4816952ef2b4", "branch" : [ { "SHA1" : "d8e22bed0aa0bb7a427ad467caeb4816952ef2b4", "name" : "origin/rc_dev" } ] } }, "origin/feat-peripheral_op_state" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 84, "buildResult" : None, "marked" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] }, "revision" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] } }, "origin/feat_yard_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 129, "buildResult" : None, "marked" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] }, "revision" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] } }, "origin/rcdev_c9969b7" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 79, "buildResult" : None, "marked" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] }, "revision" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] } }, "origin/rc_dev_suxi" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 255, "buildResult" : None, "marked" : { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "branch" : [ { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "name" : "origin/rc_dev_suxi" } ] }, "revision" : { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "branch" : [ { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "name" : "origin/rc_dev_suxi" } ] } } }, "lastBuiltRevision" : { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "branch" : [ { "SHA1" : "1e6c6aa34911755a34f4cc4acec03c6c30a2e604", "name" : "origin/rc_dev_xilian" } ] }, "remoteUrls" : [ "http://159.27.226.4/shared/shared_msgs.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/login-sync-tool.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/static_transform.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "branch" : [ { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "branch" : [ { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "name" : "origin/rc_dev" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 89, "buildResult" : None, "marked" : { "SHA1" : "7c91717b4925ba61357181d522dbaae4fc6e581a", "branch" : [ { "SHA1" : "7c91717b4925ba61357181d522dbaae4fc6e581a", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "7c91717b4925ba61357181d522dbaae4fc6e581a", "branch" : [ { "SHA1" : "7c91717b4925ba61357181d522dbaae4fc6e581a", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "branch" : [ { "SHA1" : "ee6a23d8545fb6bc325a264c67ad93e04a68575c", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/rslidar_sdk.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/test_carrier" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 252, "buildResult" : None, "marked" : { "SHA1" : "457a20c03369bd298398eac0f4d2f088dfe5e62b", "branch" : [ { "SHA1" : "457a20c03369bd298398eac0f4d2f088dfe5e62b", "name" : "origin/test_carrier" } ] }, "revision" : { "SHA1" : "457a20c03369bd298398eac0f4d2f088dfe5e62b", "branch" : [ { "SHA1" : "457a20c03369bd298398eac0f4d2f088dfe5e62b", "name" : "origin/test_carrier" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 254, "buildResult" : None, "marked" : { "SHA1" : "19420c4cf3e20fe66e8c3808203761f657f80afd", "branch" : [ { "SHA1" : "19420c4cf3e20fe66e8c3808203761f657f80afd", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "19420c4cf3e20fe66e8c3808203761f657f80afd", "branch" : [ { "SHA1" : "19420c4cf3e20fe66e8c3808203761f657f80afd", "name" : "origin/rc_dev" } ] } }, "origin/feat_record_prior_bay_info" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 38, "buildResult" : None, "marked" : { "SHA1" : "cdc724b315f744f480fd50a12198f77fc2d353f7", "branch" : [ { "SHA1" : "cdc724b315f744f480fd50a12198f77fc2d353f7", "name" : "origin/feat_record_prior_bay_info" } ] }, "revision" : { "SHA1" : "cdc724b315f744f480fd50a12198f77fc2d353f7", "branch" : [ { "SHA1" : "cdc724b315f744f480fd50a12198f77fc2d353f7", "name" : "origin/feat_record_prior_bay_info" } ] } }, "origin/test_qingdao" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "branch" : [ { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "name" : "origin/test_qingdao" } ] }, "revision" : { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "branch" : [ { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "name" : "origin/test_qingdao" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 59, "buildResult" : None, "marked" : { "SHA1" : "ec1ba863152853c743c4091dec0862003c5b4afe", "branch" : [ { "SHA1" : "ec1ba863152853c743c4091dec0862003c5b4afe", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "ec1ba863152853c743c4091dec0862003c5b4afe", "branch" : [ { "SHA1" : "ec1ba863152853c743c4091dec0862003c5b4afe", "name" : "origin/dev" } ] } }, "origin/feat_without_records" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "7671f3f20a545a7e4cc8a28db564cf03c0763821", "branch" : [ { "SHA1" : "7671f3f20a545a7e4cc8a28db564cf03c0763821", "name" : "origin/feat_without_records" } ] }, "revision" : { "SHA1" : "7671f3f20a545a7e4cc8a28db564cf03c0763821", "branch" : [ { "SHA1" : "7671f3f20a545a7e4cc8a28db564cf03c0763821", "name" : "origin/feat_without_records" } ] } } }, "lastBuiltRevision" : { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "branch" : [ { "SHA1" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "name" : "origin/test_qingdao" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/msf_localization.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/engineering/msf_assistant.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat-xilian-remoter" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 104, "buildResult" : None, "marked" : { "SHA1" : "9ec7065ef71ae73b0aed0062a333f31c0ffaa5e7", "branch" : [ { "SHA1" : "9ec7065ef71ae73b0aed0062a333f31c0ffaa5e7", "name" : "origin/feat-xilian-remoter" } ] }, "revision" : { "SHA1" : "9ec7065ef71ae73b0aed0062a333f31c0ffaa5e7", "branch" : [ { "SHA1" : "9ec7065ef71ae73b0aed0062a333f31c0ffaa5e7", "name" : "origin/feat-xilian-remoter" } ] } }, "origin/feat_weifang_bulkcargo_feature" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 60, "buildResult" : None, "marked" : { "SHA1" : "6ffba78e256b98225d93004b5c304a33fe0357ff", "branch" : [ { "SHA1" : "6ffba78e256b98225d93004b5c304a33fe0357ff", "name" : "origin/feat_weifang_bulkcargo_feature" } ] }, "revision" : { "SHA1" : "6ffba78e256b98225d93004b5c304a33fe0357ff", "branch" : [ { "SHA1" : "6ffba78e256b98225d93004b5c304a33fe0357ff", "name" : "origin/feat_weifang_bulkcargo_feature" } ] } }, "origin/feat_weifang_bulkcargo_voice" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 71, "buildResult" : None, "marked" : { "SHA1" : "d10577b2872bbcdde725e23bbccbe103f6a94b3e", "branch" : [ { "SHA1" : "d10577b2872bbcdde725e23bbccbe103f6a94b3e", "name" : "origin/feat_weifang_bulkcargo_voice" } ] }, "revision" : { "SHA1" : "d10577b2872bbcdde725e23bbccbe103f6a94b3e", "branch" : [ { "SHA1" : "d10577b2872bbcdde725e23bbccbe103f6a94b3e", "name" : "origin/feat_weifang_bulkcargo_voice" } ] } }, "origin/feat_weifang_bulkcargo_exam" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 58, "buildResult" : None, "marked" : { "SHA1" : "43e6df206edcd68f26f14e7c30f89dababf0197f", "branch" : [ { "SHA1" : "43e6df206edcd68f26f14e7c30f89dababf0197f", "name" : "origin/feat_weifang_bulkcargo_exam" } ] }, "revision" : { "SHA1" : "43e6df206edcd68f26f14e7c30f89dababf0197f", "branch" : [ { "SHA1" : "43e6df206edcd68f26f14e7c30f89dababf0197f", "name" : "origin/feat_weifang_bulkcargo_exam" } ] } }, "origin/feat_quad_screen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 38, "buildResult" : None, "marked" : { "SHA1" : "c9e8fdc1d2a5241bf52fe6ff04762f67504c4db6", "branch" : [ { "SHA1" : "c9e8fdc1d2a5241bf52fe6ff04762f67504c4db6", "name" : "origin/feat_quad_screen" } ] }, "revision" : { "SHA1" : "c9e8fdc1d2a5241bf52fe6ff04762f67504c4db6", "branch" : [ { "SHA1" : "c9e8fdc1d2a5241bf52fe6ff04762f67504c4db6", "name" : "origin/feat_quad_screen" } ] } }, "origin/feat_dongfen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 249, "buildResult" : None, "marked" : { "SHA1" : "eaa103d4556ef5872de2627545565030e4e781ae", "branch" : [ { "SHA1" : "eaa103d4556ef5872de2627545565030e4e781ae", "name" : "origin/feat_dongfen" } ] }, "revision" : { "SHA1" : "eaa103d4556ef5872de2627545565030e4e781ae", "branch" : [ { "SHA1" : "eaa103d4556ef5872de2627545565030e4e781ae", "name" : "origin/feat_dongfen" } ] } }, "origin/xilian_develop" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 226, "buildResult" : None, "marked" : { "SHA1" : "b742aff32539dc195c2dd49702fbeeb9dc961fdf", "branch" : [ { "SHA1" : "b742aff32539dc195c2dd49702fbeeb9dc961fdf", "name" : "origin/xilian_develop" } ] }, "revision" : { "SHA1" : "b742aff32539dc195c2dd49702fbeeb9dc961fdf", "branch" : [ { "SHA1" : "b742aff32539dc195c2dd49702fbeeb9dc961fdf", "name" : "origin/xilian_develop" } ] } }, "origin/feat_weifang_bulkcargo_lamp" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 42, "buildResult" : None, "marked" : { "SHA1" : "38083a57df840dfadae3abb8323a12c699ccc6e6", "branch" : [ { "SHA1" : "38083a57df840dfadae3abb8323a12c699ccc6e6", "name" : "origin/feat_weifang_bulkcargo_lamp" } ] }, "revision" : { "SHA1" : "38083a57df840dfadae3abb8323a12c699ccc6e6", "branch" : [ { "SHA1" : "38083a57df840dfadae3abb8323a12c699ccc6e6", "name" : "origin/feat_weifang_bulkcargo_lamp" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 254, "buildResult" : None, "marked" : { "SHA1" : "30769b7aa7608cf2cb01956722b0f39fefa81a0c", "branch" : [ { "SHA1" : "30769b7aa7608cf2cb01956722b0f39fefa81a0c", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "30769b7aa7608cf2cb01956722b0f39fefa81a0c", "branch" : [ { "SHA1" : "30769b7aa7608cf2cb01956722b0f39fefa81a0c", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "611fb10427ba942c9f5ca7603a29ef470fb204fc", "branch" : [ { "SHA1" : "611fb10427ba942c9f5ca7603a29ef470fb204fc", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "611fb10427ba942c9f5ca7603a29ef470fb204fc", "branch" : [ { "SHA1" : "611fb10427ba942c9f5ca7603a29ef470fb204fc", "name" : "origin/feat_disable_log" } ] } }, "origin/feat_baoshishun" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 240, "buildResult" : None, "marked" : { "SHA1" : "2b0ab5f799602e4fb82c0d0122ccfcfb941ee793", "branch" : [ { "SHA1" : "2b0ab5f799602e4fb82c0d0122ccfcfb941ee793", "name" : "origin/feat_baoshishun" } ] }, "revision" : { "SHA1" : "2b0ab5f799602e4fb82c0d0122ccfcfb941ee793", "branch" : [ { "SHA1" : "2b0ab5f799602e4fb82c0d0122ccfcfb941ee793", "name" : "origin/feat_baoshishun" } ] } }, "origin/feat_weifang_bulkcargo_canfd" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 10, "buildResult" : None, "marked" : { "SHA1" : "297e667c08021c604e7b16280203eb02430cf133", "branch" : [ { "SHA1" : "297e667c08021c604e7b16280203eb02430cf133", "name" : "origin/feat_weifang_bulkcargo_canfd" } ] }, "revision" : { "SHA1" : "297e667c08021c604e7b16280203eb02430cf133", "branch" : [ { "SHA1" : "297e667c08021c604e7b16280203eb02430cf133", "name" : "origin/feat_weifang_bulkcargo_canfd" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "branch" : [ { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "branch" : [ { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "name" : "origin/feat_xilian" } ] } }, "origin/feat_yantai" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 252, "buildResult" : None, "marked" : { "SHA1" : "5d8cb5eea5b7ca3f7a2719977aec9714a9f2df38", "branch" : [ { "SHA1" : "5d8cb5eea5b7ca3f7a2719977aec9714a9f2df38", "name" : "origin/feat_yantai" } ] }, "revision" : { "SHA1" : "5d8cb5eea5b7ca3f7a2719977aec9714a9f2df38", "branch" : [ { "SHA1" : "5d8cb5eea5b7ca3f7a2719977aec9714a9f2df38", "name" : "origin/feat_yantai" } ] } } }, "lastBuiltRevision" : { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "branch" : [ { "SHA1" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "name" : "origin/feat_xilian" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/peripheral_controller.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "branch" : [ { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "branch" : [ { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_nolog" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "b2569fc1edcb66bc2b4087aaa76f8c7a73ffd12b", "branch" : [ { "SHA1" : "b2569fc1edcb66bc2b4087aaa76f8c7a73ffd12b", "name" : "origin/rc_dev_nolog" } ] }, "revision" : { "SHA1" : "b2569fc1edcb66bc2b4087aaa76f8c7a73ffd12b", "branch" : [ { "SHA1" : "b2569fc1edcb66bc2b4087aaa76f8c7a73ffd12b", "name" : "origin/rc_dev_nolog" } ] } } }, "lastBuiltRevision" : { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "branch" : [ { "SHA1" : "0d8edec7e32a8ee7b82502fc7d891760d25b7eb8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/data_collection.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/tos_visualize.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/test2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "2bcce7ad8291b4187c56b4117e801c23a2a654c3", "branch" : [ { "SHA1" : "2bcce7ad8291b4187c56b4117e801c23a2a654c3", "name" : "origin/test2" } ] }, "revision" : { "SHA1" : "2bcce7ad8291b4187c56b4117e801c23a2a654c3", "branch" : [ { "SHA1" : "2bcce7ad8291b4187c56b4117e801c23a2a654c3", "name" : "origin/test2" } ] } }, "origin/test1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 3, "buildResult" : None, "marked" : { "SHA1" : "f2b266915cf7adfd4cdb96e42c48fc1b9091a5d7", "branch" : [ { "SHA1" : "f2b266915cf7adfd4cdb96e42c48fc1b9091a5d7", "name" : "origin/test1" } ] }, "revision" : { "SHA1" : "f2b266915cf7adfd4cdb96e42c48fc1b9091a5d7", "branch" : [ { "SHA1" : "f2b266915cf7adfd4cdb96e42c48fc1b9091a5d7", "name" : "origin/test1" } ] } }, "origin/rc_dev_perceptive" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 255, "buildResult" : None, "marked" : { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "branch" : [ { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "name" : "origin/rc_dev_perceptive" } ] }, "revision" : { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "branch" : [ { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "name" : "origin/rc_dev_perceptive" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] } }, "origin/dev_cvtext" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 146, "buildResult" : None, "marked" : { "SHA1" : "347d1cbb552d95a0d1383857573bf9b4e2153935", "branch" : [ { "SHA1" : "347d1cbb552d95a0d1383857573bf9b4e2153935", "name" : "origin/dev_cvtext" } ] }, "revision" : { "SHA1" : "347d1cbb552d95a0d1383857573bf9b4e2153935", "branch" : [ { "SHA1" : "347d1cbb552d95a0d1383857573bf9b4e2153935", "name" : "origin/dev_cvtext" } ] } }, "origin/rc_dev_nolog" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "bfd91556b5a775a03bc60873fff21835600752ec", "branch" : [ { "SHA1" : "bfd91556b5a775a03bc60873fff21835600752ec", "name" : "origin/rc_dev_nolog" } ] }, "revision" : { "SHA1" : "bfd91556b5a775a03bc60873fff21835600752ec", "branch" : [ { "SHA1" : "bfd91556b5a775a03bc60873fff21835600752ec", "name" : "origin/rc_dev_nolog" } ] } } }, "lastBuiltRevision" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/camera_driver.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/engineering/sins_calibration_hmi.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/test/tools.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/system-ros.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "branch" : [ { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "branch" : [ { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "name" : "origin/rc_dev" } ] } }, "origin/feat-traffic_light" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 58, "buildResult" : None, "marked" : { "SHA1" : "94afbdf9851e7618697c51ce1450ee257d7e2749", "branch" : [ { "SHA1" : "94afbdf9851e7618697c51ce1450ee257d7e2749", "name" : "origin/feat-traffic_light" } ] }, "revision" : { "SHA1" : "94afbdf9851e7618697c51ce1450ee257d7e2749", "branch" : [ { "SHA1" : "94afbdf9851e7618697c51ce1450ee257d7e2749", "name" : "origin/feat-traffic_light" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "acde484e4ef02d0bebdaf5ee2f8141680c4f23d8", "branch" : [ { "SHA1" : "acde484e4ef02d0bebdaf5ee2f8141680c4f23d8", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "acde484e4ef02d0bebdaf5ee2f8141680c4f23d8", "branch" : [ { "SHA1" : "acde484e4ef02d0bebdaf5ee2f8141680c4f23d8", "name" : "origin/feat_disable_log" } ] } }, "origin/feat-container_direction" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 32, "buildResult" : None, "marked" : { "SHA1" : "77718daa6cd42a7b1ba5f67933d3a25c0bdad24d", "branch" : [ { "SHA1" : "77718daa6cd42a7b1ba5f67933d3a25c0bdad24d", "name" : "origin/feat-container_direction" } ] }, "revision" : { "SHA1" : "77718daa6cd42a7b1ba5f67933d3a25c0bdad24d", "branch" : [ { "SHA1" : "77718daa6cd42a7b1ba5f67933d3a25c0bdad24d", "name" : "origin/feat-container_direction" } ] } } }, "lastBuiltRevision" : { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "branch" : [ { "SHA1" : "493c9ca3329dbabd35c5688ea6d6e9c889ccc0e0", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rminterpreter.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "branch" : [ { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "branch" : [ { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "name" : "origin/rc_dev" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 252, "buildResult" : None, "marked" : { "SHA1" : "ecec36de1d12cac12b1d62f25b70000070426f97", "branch" : [ { "SHA1" : "ecec36de1d12cac12b1d62f25b70000070426f97", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "ecec36de1d12cac12b1d62f25b70000070426f97", "branch" : [ { "SHA1" : "ecec36de1d12cac12b1d62f25b70000070426f97", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "branch" : [ { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_cloud.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "branch" : [ { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "branch" : [ { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "a2c65d8c39d0cdb4c132d4d54ec84c02ddf2680f", "branch" : [ { "SHA1" : "a2c65d8c39d0cdb4c132d4d54ec84c02ddf2680f", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "a2c65d8c39d0cdb4c132d4d54ec84c02ddf2680f", "branch" : [ { "SHA1" : "a2c65d8c39d0cdb4c132d4d54ec84c02ddf2680f", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "branch" : [ { "SHA1" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node-manager.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/thirdparty.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/test" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 71, "buildResult" : None, "marked" : { "SHA1" : "6f22ba775d21d194b1e4c85ef88c25b510404465", "branch" : [ { "SHA1" : "6f22ba775d21d194b1e4c85ef88c25b510404465", "name" : "origin/test" } ] }, "revision" : { "SHA1" : "6f22ba775d21d194b1e4c85ef88c25b510404465", "branch" : [ { "SHA1" : "6f22ba775d21d194b1e4c85ef88c25b510404465", "name" : "origin/test" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "69604c2813695208b86c0e2359dd47c49f8f95a3", "branch" : [ { "SHA1" : "69604c2813695208b86c0e2359dd47c49f8f95a3", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "69604c2813695208b86c0e2359dd47c49f8f95a3", "branch" : [ { "SHA1" : "69604c2813695208b86c0e2359dd47c49f8f95a3", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node-manager-hmi.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "branch" : [ { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "branch" : [ { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "045acd3e7d5f4feccf48bcc7b8cec09a4ad6cc10", "branch" : [ { "SHA1" : "045acd3e7d5f4feccf48bcc7b8cec09a4ad6cc10", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "045acd3e7d5f4feccf48bcc7b8cec09a4ad6cc10", "branch" : [ { "SHA1" : "045acd3e7d5f4feccf48bcc7b8cec09a4ad6cc10", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "branch" : [ { "SHA1" : "51eec9f30dd5859ede1827a71e0253dbd790952b", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node_manager_online.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_canfd" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "ae549139e5332f03a4cd281f07fd1b47934e006b", "branch" : [ { "SHA1" : "ae549139e5332f03a4cd281f07fd1b47934e006b", "name" : "origin/feat_canfd" } ] }, "revision" : { "SHA1" : "ae549139e5332f03a4cd281f07fd1b47934e006b", "branch" : [ { "SHA1" : "ae549139e5332f03a4cd281f07fd1b47934e006b", "name" : "origin/feat_canfd" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "branch" : [ { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "branch" : [ { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "50c2209330168577087a67114498271d95b0956d", "branch" : [ { "SHA1" : "50c2209330168577087a67114498271d95b0956d", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "50c2209330168577087a67114498271d95b0956d", "branch" : [ { "SHA1" : "50c2209330168577087a67114498271d95b0956d", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "branch" : [ { "SHA1" : "2666e3a2e7169a8a09670af452522fd332322d47", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/unified-system-monitor.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/ros-bridge.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "branch" : [ { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "branch" : [ { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "f3f2a3ac8752c76872175a703b7e1a75f95bb320", "branch" : [ { "SHA1" : "f3f2a3ac8752c76872175a703b7e1a75f95bb320", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "f3f2a3ac8752c76872175a703b7e1a75f95bb320", "branch" : [ { "SHA1" : "f3f2a3ac8752c76872175a703b7e1a75f95bb320", "name" : "origin/feat_disable_log" } ] } }, "origin/test3" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "9ee170d132d68f71d3ec20f7917ee269c68a2dc9", "branch" : [ { "SHA1" : "9ee170d132d68f71d3ec20f7917ee269c68a2dc9", "name" : "origin/test3" } ] }, "revision" : { "SHA1" : "9ee170d132d68f71d3ec20f7917ee269c68a2dc9", "branch" : [ { "SHA1" : "9ee170d132d68f71d3ec20f7917ee269c68a2dc9", "name" : "origin/test3" } ] } } }, "lastBuiltRevision" : { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "branch" : [ { "SHA1" : "714a3300842658ddd61989b1e45215c33f12bfbc", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/hdcontrol.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/test" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 44, "buildResult" : None, "marked" : { "SHA1" : "d3c00c66bedfd0ea51c0f901a5fc687372e02047", "branch" : [ { "SHA1" : "d3c00c66bedfd0ea51c0f901a5fc687372e02047", "name" : "origin/test" } ] }, "revision" : { "SHA1" : "d3c00c66bedfd0ea51c0f901a5fc687372e02047", "branch" : [ { "SHA1" : "d3c00c66bedfd0ea51c0f901a5fc687372e02047", "name" : "origin/test" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 255, "buildResult" : None, "marked" : { "SHA1" : "3ece4deef6e3446d9e8e8583febcdd65de5790be", "branch" : [ { "SHA1" : "3ece4deef6e3446d9e8e8583febcdd65de5790be", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "3ece4deef6e3446d9e8e8583febcdd65de5790be", "branch" : [ { "SHA1" : "3ece4deef6e3446d9e8e8583febcdd65de5790be", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "6b3c2bcecc89d934ac13d99e8e3aa5c016e37461", "branch" : [ { "SHA1" : "6b3c2bcecc89d934ac13d99e8e3aa5c016e37461", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "6b3c2bcecc89d934ac13d99e8e3aa5c016e37461", "branch" : [ { "SHA1" : "6b3c2bcecc89d934ac13d99e8e3aa5c016e37461", "name" : "origin/feat_disable_log" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "branch" : [ { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "branch" : [ { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "name" : "origin/feat_xilian" } ] } } }, "lastBuiltRevision" : { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "branch" : [ { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "name" : "origin/feat_xilian" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rcinterpreter.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_safety_check_xl" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 134, "buildResult" : None, "marked" : { "SHA1" : "1e17a0f38203fcf1e25631a85434cf53215be80f", "branch" : [ { "SHA1" : "1e17a0f38203fcf1e25631a85434cf53215be80f", "name" : "origin/feat_safety_check_xl" } ] }, "revision" : { "SHA1" : "1e17a0f38203fcf1e25631a85434cf53215be80f", "branch" : [ { "SHA1" : "1e17a0f38203fcf1e25631a85434cf53215be80f", "name" : "origin/feat_safety_check_xl" } ] } }, "origin/feat_yard_decider" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 129, "buildResult" : None, "marked" : { "SHA1" : "861d4725ab2f84a16d6d3d414e2b11543a4bc1ee", "branch" : [ { "SHA1" : "861d4725ab2f84a16d6d3d414e2b11543a4bc1ee", "name" : "origin/feat_yard_decider" } ] }, "revision" : { "SHA1" : "861d4725ab2f84a16d6d3d414e2b11543a4bc1ee", "branch" : [ { "SHA1" : "861d4725ab2f84a16d6d3d414e2b11543a4bc1ee", "name" : "origin/feat_yard_decider" } ] } }, "origin/dev_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "7dfda59c1971723325dedb18473b9707099fc64f", "branch" : [ { "SHA1" : "7dfda59c1971723325dedb18473b9707099fc64f", "name" : "origin/dev_log" } ] }, "revision" : { "SHA1" : "7dfda59c1971723325dedb18473b9707099fc64f", "branch" : [ { "SHA1" : "7dfda59c1971723325dedb18473b9707099fc64f", "name" : "origin/dev_log" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 199, "buildResult" : None, "marked" : { "SHA1" : "bd6730672469a4c0ff0d9e2de8c3e7dffec58f45", "branch" : [ { "SHA1" : "bd6730672469a4c0ff0d9e2de8c3e7dffec58f45", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "bd6730672469a4c0ff0d9e2de8c3e7dffec58f45", "branch" : [ { "SHA1" : "bd6730672469a4c0ff0d9e2de8c3e7dffec58f45", "name" : "origin/dev" } ] } }, "origin/feat_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 94, "buildResult" : None, "marked" : { "SHA1" : "59e74131588c3df2c7260d0708b7ca3e9c9ba3e4", "branch" : [ { "SHA1" : "59e74131588c3df2c7260d0708b7ca3e9c9ba3e4", "name" : "origin/feat_change" } ] }, "revision" : { "SHA1" : "59e74131588c3df2c7260d0708b7ca3e9c9ba3e4", "branch" : [ { "SHA1" : "59e74131588c3df2c7260d0708b7ca3e9c9ba3e4", "name" : "origin/feat_change" } ] } }, "origin/temp_hfsm" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 71, "buildResult" : None, "marked" : { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "branch" : [ { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "name" : "origin/temp_hfsm" } ] }, "revision" : { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "branch" : [ { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "name" : "origin/temp_hfsm" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 222, "buildResult" : None, "marked" : { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "branch" : [ { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "branch" : [ { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "name" : "origin/rc_dev" } ] } }, "origin/feat_wbca_truck_dp_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 175, "buildResult" : None, "marked" : { "SHA1" : "fbcec908efd6c586d1a9ac07492d1916c2761543", "branch" : [ { "SHA1" : "fbcec908efd6c586d1a9ac07492d1916c2761543", "name" : "origin/feat_wbca_truck_dp_dev" } ] }, "revision" : { "SHA1" : "fbcec908efd6c586d1a9ac07492d1916c2761543", "branch" : [ { "SHA1" : "fbcec908efd6c586d1a9ac07492d1916c2761543", "name" : "origin/feat_wbca_truck_dp_dev" } ] } }, "origin/feat_park" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 229, "buildResult" : None, "marked" : { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "branch" : [ { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "name" : "origin/feat_park" } ] }, "revision" : { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "branch" : [ { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "name" : "origin/feat_park" } ] } }, "origin/feat_traffic_light" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 42, "buildResult" : None, "marked" : { "SHA1" : "dae1496e6b71f436eed208bb7f61e2f39d726f50", "branch" : [ { "SHA1" : "dae1496e6b71f436eed208bb7f61e2f39d726f50", "name" : "origin/feat_traffic_light" } ] }, "revision" : { "SHA1" : "dae1496e6b71f436eed208bb7f61e2f39d726f50", "branch" : [ { "SHA1" : "dae1496e6b71f436eed208bb7f61e2f39d726f50", "name" : "origin/feat_traffic_light" } ] } }, "origin/feat_block_data" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 212, "buildResult" : None, "marked" : { "SHA1" : "95cd70518e3208559e02087bcf88bc37f385d563", "branch" : [ { "SHA1" : "95cd70518e3208559e02087bcf88bc37f385d563", "name" : "origin/feat_block_data" } ] }, "revision" : { "SHA1" : "95cd70518e3208559e02087bcf88bc37f385d563", "branch" : [ { "SHA1" : "95cd70518e3208559e02087bcf88bc37f385d563", "name" : "origin/feat_block_data" } ] } }, "origin/feat_xilian_speed_limit" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 98, "buildResult" : None, "marked" : { "SHA1" : "80ccdec2ffbc2f812bc4658c338836a65c106b43", "branch" : [ { "SHA1" : "80ccdec2ffbc2f812bc4658c338836a65c106b43", "name" : "origin/feat_xilian_speed_limit" } ] }, "revision" : { "SHA1" : "80ccdec2ffbc2f812bc4658c338836a65c106b43", "branch" : [ { "SHA1" : "80ccdec2ffbc2f812bc4658c338836a65c106b43", "name" : "origin/feat_xilian_speed_limit" } ] } }, "origin/feat_straddle_v2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 252, "buildResult" : None, "marked" : { "SHA1" : "1fa7413087551c0750c33873b06ee32ee45a868c", "branch" : [ { "SHA1" : "1fa7413087551c0750c33873b06ee32ee45a868c", "name" : "origin/feat_straddle_v2" } ] }, "revision" : { "SHA1" : "1fa7413087551c0750c33873b06ee32ee45a868c", "branch" : [ { "SHA1" : "1fa7413087551c0750c33873b06ee32ee45a868c", "name" : "origin/feat_straddle_v2" } ] } }, "origin/feat_hdmap_dynamic_sidepass" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 115, "buildResult" : None, "marked" : { "SHA1" : "42ac720f59648f1626e92b9897cf793e3f34f893", "branch" : [ { "SHA1" : "42ac720f59648f1626e92b9897cf793e3f34f893", "name" : "origin/feat_hdmap_dynamic_sidepass" } ] }, "revision" : { "SHA1" : "42ac720f59648f1626e92b9897cf793e3f34f893", "branch" : [ { "SHA1" : "42ac720f59648f1626e92b9897cf793e3f34f893", "name" : "origin/feat_hdmap_dynamic_sidepass" } ] } }, "origin/feat_seaside" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 193, "buildResult" : None, "marked" : { "SHA1" : "32572e0a5cf080be0a5f9b0166321401a2c65b60", "branch" : [ { "SHA1" : "32572e0a5cf080be0a5f9b0166321401a2c65b60", "name" : "origin/feat_seaside" } ] }, "revision" : { "SHA1" : "32572e0a5cf080be0a5f9b0166321401a2c65b60", "branch" : [ { "SHA1" : "32572e0a5cf080be0a5f9b0166321401a2c65b60", "name" : "origin/feat_seaside" } ] } }, "origin/feat_base" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 240, "buildResult" : None, "marked" : { "SHA1" : "35c890fe6d108738379774a7a1d377d88550f0e2", "branch" : [ { "SHA1" : "35c890fe6d108738379774a7a1d377d88550f0e2", "name" : "origin/feat_base" } ] }, "revision" : { "SHA1" : "35c890fe6d108738379774a7a1d377d88550f0e2", "branch" : [ { "SHA1" : "35c890fe6d108738379774a7a1d377d88550f0e2", "name" : "origin/feat_base" } ] } }, "origin/feat_hfsm" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 75, "buildResult" : None, "marked" : { "SHA1" : "45ee909c4e45c99d2f4ceb12bb7c66e46e4e7d98", "branch" : [ { "SHA1" : "45ee909c4e45c99d2f4ceb12bb7c66e46e4e7d98", "name" : "origin/feat_hfsm" } ] }, "revision" : { "SHA1" : "45ee909c4e45c99d2f4ceb12bb7c66e46e4e7d98", "branch" : [ { "SHA1" : "45ee909c4e45c99d2f4ceb12bb7c66e46e4e7d98", "name" : "origin/feat_hfsm" } ] } }, "origin/feat_error" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 249, "buildResult" : None, "marked" : { "SHA1" : "d1339959e20fc97286774fde53b67106b3b25cc5", "branch" : [ { "SHA1" : "d1339959e20fc97286774fde53b67106b3b25cc5", "name" : "origin/feat_error" } ] }, "revision" : { "SHA1" : "d1339959e20fc97286774fde53b67106b3b25cc5", "branch" : [ { "SHA1" : "d1339959e20fc97286774fde53b67106b3b25cc5", "name" : "origin/feat_error" } ] } }, "origin/feat_merge" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 20, "buildResult" : None, "marked" : { "SHA1" : "ba719f52bcad92668b63ba1f33d4ed64fddbeb26", "branch" : [ { "SHA1" : "ba719f52bcad92668b63ba1f33d4ed64fddbeb26", "name" : "origin/feat_merge" } ] }, "revision" : { "SHA1" : "ba719f52bcad92668b63ba1f33d4ed64fddbeb26", "branch" : [ { "SHA1" : "ba719f52bcad92668b63ba1f33d4ed64fddbeb26", "name" : "origin/feat_merge" } ] } }, "origin/cl_action_type" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 84, "buildResult" : None, "marked" : { "SHA1" : "e6a438b106a2477add9de57f4f989471f7f9cbc3", "branch" : [ { "SHA1" : "e6a438b106a2477add9de57f4f989471f7f9cbc3", "name" : "origin/cl_action_type" } ] }, "revision" : { "SHA1" : "e6a438b106a2477add9de57f4f989471f7f9cbc3", "branch" : [ { "SHA1" : "e6a438b106a2477add9de57f4f989471f7f9cbc3", "name" : "origin/cl_action_type" } ] } }, "origin/feat_seg_route" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 18, "buildResult" : None, "marked" : { "SHA1" : "c9302f353f59cb737db5991f81b0a91919347576", "branch" : [ { "SHA1" : "c9302f353f59cb737db5991f81b0a91919347576", "name" : "origin/feat_seg_route" } ] }, "revision" : { "SHA1" : "c9302f353f59cb737db5991f81b0a91919347576", "branch" : [ { "SHA1" : "c9302f353f59cb737db5991f81b0a91919347576", "name" : "origin/feat_seg_route" } ] } }, "origin/feat_reverse_tt" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 49, "buildResult" : None, "marked" : { "SHA1" : "2b0c215e8fa9ce1f37bf97a75c95d7ade81c441b", "branch" : [ { "SHA1" : "2b0c215e8fa9ce1f37bf97a75c95d7ade81c441b", "name" : "origin/feat_reverse_tt" } ] }, "revision" : { "SHA1" : "2b0c215e8fa9ce1f37bf97a75c95d7ade81c441b", "branch" : [ { "SHA1" : "2b0c215e8fa9ce1f37bf97a75c95d7ade81c441b", "name" : "origin/feat_reverse_tt" } ] } }, "origin/feat_lock_station" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 210, "buildResult" : None, "marked" : { "SHA1" : "fd94d0fc78fe1e2c30ae3f5e0ca4f8c7722c7700", "branch" : [ { "SHA1" : "fd94d0fc78fe1e2c30ae3f5e0ca4f8c7722c7700", "name" : "origin/feat_lock_station" } ] }, "revision" : { "SHA1" : "fd94d0fc78fe1e2c30ae3f5e0ca4f8c7722c7700", "branch" : [ { "SHA1" : "fd94d0fc78fe1e2c30ae3f5e0ca4f8c7722c7700", "name" : "origin/feat_lock_station" } ] } }, "origin/feat_straddle" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 235, "buildResult" : None, "marked" : { "SHA1" : "0e9036b137515460b88244a62990e6e06ef0559e", "branch" : [ { "SHA1" : "0e9036b137515460b88244a62990e6e06ef0559e", "name" : "origin/feat_straddle" } ] }, "revision" : { "SHA1" : "0e9036b137515460b88244a62990e6e06ef0559e", "branch" : [ { "SHA1" : "0e9036b137515460b88244a62990e6e06ef0559e", "name" : "origin/feat_straddle" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 233, "buildResult" : None, "marked" : { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "branch" : [ { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "branch" : [ { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "name" : "origin/feat_xilian" } ] } }, "origin/feat_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "branch" : [ { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "name" : "origin/feat_pnc_status" } ] }, "revision" : { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "branch" : [ { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "name" : "origin/feat_pnc_status" } ] } } }, "lastBuiltRevision" : { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "branch" : [ { "SHA1" : "d0b57ae1ae306e1f4ea045235f9a6f21a4a8801d", "name" : "origin/feat_pnc_status" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/pnc.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "branch" : [ { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "branch" : [ { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "8e4f72ea0e642153ba0efbe4aac52455e0eb3d40", "branch" : [ { "SHA1" : "8e4f72ea0e642153ba0efbe4aac52455e0eb3d40", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "8e4f72ea0e642153ba0efbe4aac52455e0eb3d40", "branch" : [ { "SHA1" : "8e4f72ea0e642153ba0efbe4aac52455e0eb3d40", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "branch" : [ { "SHA1" : "86517252b542f80ec6fd63654aadd5466e9591fc", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/versions_observer.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "branch" : [ { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "branch" : [ { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "acc7b7d65905fa9316731cff947bf6e6eaa1e704", "branch" : [ { "SHA1" : "acc7b7d65905fa9316731cff947bf6e6eaa1e704", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "acc7b7d65905fa9316731cff947bf6e6eaa1e704", "branch" : [ { "SHA1" : "acc7b7d65905fa9316731cff947bf6e6eaa1e704", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "branch" : [ { "SHA1" : "1e6c29be9e17d2d6eed718424bad84c1f1c933ec", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/cache_bag_node.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_align" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 30, "buildResult" : None, "marked" : { "SHA1" : "263a3fb08b0ae827846ac7b18a76d09053a642b3", "branch" : [ { "SHA1" : "263a3fb08b0ae827846ac7b18a76d09053a642b3", "name" : "origin/feat_align" } ] }, "revision" : { "SHA1" : "263a3fb08b0ae827846ac7b18a76d09053a642b3", "branch" : [ { "SHA1" : "263a3fb08b0ae827846ac7b18a76d09053a642b3", "name" : "origin/feat_align" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 233, "buildResult" : None, "marked" : { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "branch" : [ { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "branch" : [ { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "name" : "origin/rc_dev" } ] } }, "origin/dev_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "8088221c80561d81ee540a958798486e58f48456", "branch" : [ { "SHA1" : "8088221c80561d81ee540a958798486e58f48456", "name" : "origin/dev_log" } ] }, "revision" : { "SHA1" : "8088221c80561d81ee540a958798486e58f48456", "branch" : [ { "SHA1" : "8088221c80561d81ee540a958798486e58f48456", "name" : "origin/dev_log" } ] } }, "origin/feat_throttle" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 108, "buildResult" : None, "marked" : { "SHA1" : "23381835720bd8fcfdd9000091fc0a9ae2e6ba50", "branch" : [ { "SHA1" : "23381835720bd8fcfdd9000091fc0a9ae2e6ba50", "name" : "origin/feat_throttle" } ] }, "revision" : { "SHA1" : "23381835720bd8fcfdd9000091fc0a9ae2e6ba50", "branch" : [ { "SHA1" : "23381835720bd8fcfdd9000091fc0a9ae2e6ba50", "name" : "origin/feat_throttle" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 210, "buildResult" : None, "marked" : { "SHA1" : "654c4699bcb0ae15999f4396df65857018f37977", "branch" : [ { "SHA1" : "654c4699bcb0ae15999f4396df65857018f37977", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "654c4699bcb0ae15999f4396df65857018f37977", "branch" : [ { "SHA1" : "654c4699bcb0ae15999f4396df65857018f37977", "name" : "origin/dev" } ] } }, "origin/feat_cargo_width_remote" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 249, "buildResult" : None, "marked" : { "SHA1" : "469f07d20c84a2ea7e65c7e9f0fe21ceb58069c1", "branch" : [ { "SHA1" : "469f07d20c84a2ea7e65c7e9f0fe21ceb58069c1", "name" : "origin/feat_cargo_width_remote" } ] }, "revision" : { "SHA1" : "469f07d20c84a2ea7e65c7e9f0fe21ceb58069c1", "branch" : [ { "SHA1" : "469f07d20c84a2ea7e65c7e9f0fe21ceb58069c1", "name" : "origin/feat_cargo_width_remote" } ] } }, "origin/feat_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "branch" : [ { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "name" : "origin/feat_pnc_status" } ] }, "revision" : { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "branch" : [ { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "name" : "origin/feat_pnc_status" } ] } }, "origin/feat_straddle_v2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 252, "buildResult" : None, "marked" : { "SHA1" : "2629960bdac805c076789115c8a182da59c77373", "branch" : [ { "SHA1" : "2629960bdac805c076789115c8a182da59c77373", "name" : "origin/feat_straddle_v2" } ] }, "revision" : { "SHA1" : "2629960bdac805c076789115c8a182da59c77373", "branch" : [ { "SHA1" : "2629960bdac805c076789115c8a182da59c77373", "name" : "origin/feat_straddle_v2" } ] } } }, "lastBuiltRevision" : { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "branch" : [ { "SHA1" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "name" : "origin/feat_pnc_status" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/control.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "branch" : [ { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "branch" : [ { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "3456d5be62cc541ffe263a39a618fd23064ee990", "branch" : [ { "SHA1" : "3456d5be62cc541ffe263a39a618fd23064ee990", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "3456d5be62cc541ffe263a39a618fd23064ee990", "branch" : [ { "SHA1" : "3456d5be62cc541ffe263a39a618fd23064ee990", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "branch" : [ { "SHA1" : "af646f9d4dcd86d657c5d54ef6fc4b14a406d2ef", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/system_monitor.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "dd9a5a811dce30afa47a55a40f0f2d62f5ffd056", "branch" : [ { "SHA1" : "dd9a5a811dce30afa47a55a40f0f2d62f5ffd056", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "dd9a5a811dce30afa47a55a40f0f2d62f5ffd056", "branch" : [ { "SHA1" : "dd9a5a811dce30afa47a55a40f0f2d62f5ffd056", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/performance_analyst.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/schedule_manager.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "branch" : [ { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "branch" : [ { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "name" : "origin/rc_dev" } ] } }, "origin/feat_disable_log" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 70, "buildResult" : None, "marked" : { "SHA1" : "adbeaf543687e7446b2fe05a60ae8c6aa0d4ffcd", "branch" : [ { "SHA1" : "adbeaf543687e7446b2fe05a60ae8c6aa0d4ffcd", "name" : "origin/feat_disable_log" } ] }, "revision" : { "SHA1" : "adbeaf543687e7446b2fe05a60ae8c6aa0d4ffcd", "branch" : [ { "SHA1" : "adbeaf543687e7446b2fe05a60ae8c6aa0d4ffcd", "name" : "origin/feat_disable_log" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "branch" : [ { "SHA1" : "a817e5470eb73fe2cc0d677adfaad99bf50152c5", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/calibration_tools.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 254, "buildResult" : None, "marked" : { "SHA1" : "65937b20bc9a54bff9f4a6e012183263d23cdd4e", "branch" : [ { "SHA1" : "65937b20bc9a54bff9f4a6e012183263d23cdd4e", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "65937b20bc9a54bff9f4a6e012183263d23cdd4e", "branch" : [ { "SHA1" : "65937b20bc9a54bff9f4a6e012183263d23cdd4e", "name" : "origin/rc_dev" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "branch" : [ { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "branch" : [ { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "branch" : [ { "SHA1" : "30719edde31f76b64ddf0e83ef3a9d01b4b37c02", "name" : "origin/dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/snapshot_upload.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/new_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 112, "buildResult" : None, "marked" : { "SHA1" : "972078ee9690d8328cf2b13212ea1d6530a5dcd5", "branch" : [ { "SHA1" : "972078ee9690d8328cf2b13212ea1d6530a5dcd5", "name" : "origin/new_interface" } ] }, "revision" : { "SHA1" : "972078ee9690d8328cf2b13212ea1d6530a5dcd5", "branch" : [ { "SHA1" : "972078ee9690d8328cf2b13212ea1d6530a5dcd5", "name" : "origin/new_interface" } ] } }, "origin/temp_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 116, "buildResult" : None, "marked" : { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "branch" : [ { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "name" : "origin/temp_interface" } ] }, "revision" : { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "branch" : [ { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "name" : "origin/temp_interface" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "branch" : [ { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "branch" : [ { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "branch" : [ { "SHA1" : "0685adc598071a7d04c1a25b2f1fc26081617c25", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_interface.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "branch" : [ { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "branch" : [ { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "branch" : [ { "SHA1" : "eaa6ecb0c939130513abdaa59dfa3eb356b197cb", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/spreader_segmentation.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/perception_publisher.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "branch" : [ { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "branch" : [ { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "branch" : [ { "SHA1" : "6ed5e686b8b6a0da3818585112d642e62b6c2879", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rtsp_relayer.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "branch" : [ { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "branch" : [ { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "name" : "origin/rc_dev" } ] } }, "refs/remotes/origin/gld/full-log-version" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 116, "buildResult" : None, "marked" : { "SHA1" : "2cf23952cd2af8843b65f530717394e08edd3225", "branch" : [ { "SHA1" : "2cf23952cd2af8843b65f530717394e08edd3225", "name" : "refs/remotes/origin/gld/full-log-version" } ] }, "revision" : { "SHA1" : "2cf23952cd2af8843b65f530717394e08edd3225", "branch" : [ { "SHA1" : "2cf23952cd2af8843b65f530717394e08edd3225", "name" : "refs/remotes/origin/gld/full-log-version" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 111, "buildResult" : None, "marked" : { "SHA1" : "1b09c285e151ae08e59e25307c6a65ac05e0e520", "branch" : [ { "SHA1" : "1b09c285e151ae08e59e25307c6a65ac05e0e520", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "1b09c285e151ae08e59e25307c6a65ac05e0e520", "branch" : [ { "SHA1" : "1b09c285e151ae08e59e25307c6a65ac05e0e520", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "branch" : [ { "SHA1" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/hesai_lidar.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 258, "buildResult" : None, "marked" : { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "branch" : [ { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "branch" : [ { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "branch" : [ { "SHA1" : "91ceb4d11efa6f5690b515714e75ec8c03bedc61", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/new_truck_spreader_detection.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.view.InterpolatedSecretsAction" }, { }, { }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.displayurlapi.actions.RunDisplayAction" }, { "_class" : "org.jenkinsci.plugins.pipeline.modeldefinition.actions.RestartDeclarativePipelineAction" }, { }, { "_class" : "org.jenkinsci.plugins.workflow.job.views.FlowGraphAction" }, { }, { }, { } ], "artifacts" : [ ], "building" : False, "description" : None, "displayName" : "#258", "duration" : 765246, "estimatedDuration" : 3827903, "executor" : None, "fullDisplayName" : "orin-slave64 #258", "id" : "258", "keepLog" : False, "number" : 258, "queueId" : 1026697, "result" : "FAILURE", "timestamp" : 1769775195080, "url" : "http://159.27.114.184:8080/jenkins/user/yuli/my-views/view/all/job/orin-slave64/258/", "changeSets" : [ { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/org/devops/vehicleInfo.groovy" ], "commitId" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "timestamp" : 1769744731000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update vehicleInfo.groovy\u000a", "date" : "2026-01-30 03:45:31 +0000", "id" : "2ac0a9cc50262b2efade8014f082c73dbcfb0dee", "msg" : "Update vehicleInfo.groovy", "paths" : [ { "editType" : "edit", "file" : "src/org/devops/vehicleInfo.groovy" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hdmap/map-png.jenkinsfile" ], "commitId" : "237353980be2183ac8d05247f4a88724383b8e0c", "timestamp" : 1769133659000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update map-png.jenkinsfile\u000a", "date" : "2026-01-23 02:00:59 +0000", "id" : "237353980be2183ac8d05247f4a88724383b8e0c", "msg" : "Update map-png.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "hdmap/map-png.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "params/ningbozhoushan-jilipiantou-submodule.jenkinsfile" ], "commitId" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "timestamp" : 1769744677000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Add new file\u000a", "date" : "2026-01-30 03:44:37 +0000", "id" : "56036eb2b6dbdc7ff98b2f8261c9d0068b5f0496", "msg" : "Add new file", "paths" : [ { "editType" : "add", "file" : "params/ningbozhoushan-jilipiantou-submodule.jenkinsfile" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "pnc_debug_msgs/msg/ObserverDebug.msg", "pnc_debug_msgs/msg/CtrlDebug.msg", "pnc_debug_msgs/CMakeLists.txt" ], "commitId" : "3334c4581b4794355e678d586eaf5bb46eccefe1", "timestamp" : 1760096924000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo@senior.auto", "comment" : "feat:在pnc_debug中增加observer_debug\u000a", "date" : "2025-10-10 19:48:44 +0800", "id" : "3334c4581b4794355e678d586eaf5bb46eccefe1", "msg" : "feat:在pnc_debug中增加observer_debug", "paths" : [ { "editType" : "add", "file" : "pnc_debug_msgs/msg/ObserverDebug.msg" }, { "editType" : "edit", "file" : "pnc_debug_msgs/msg/CtrlDebug.msg" }, { "editType" : "edit", "file" : "pnc_debug_msgs/CMakeLists.txt" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sins/strapdown_truck.cpp", "sins/sins_types.h", "ins_driver/ins_driver.cpp", "sins/sins.cpp", "local_integ/localization_types.h", "local_integ/measure_republish_process.cpp" ], "commitId" : "41e7f8dd082e68673e9494a13d4602611d252f3c", "timestamp" : 1765555655000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/matao", "fullName" : "matao" }, "authorEmail" : "matao@senior.auto", "comment" : "note: 放宽人工驾驶的停车检测条件\u000a", "date" : "2025-12-13 00:07:35 +0800", "id" : "41e7f8dd082e68673e9494a13d4602611d252f3c", "msg" : "note: 放宽人工驾驶的停车检测条件", "paths" : [ { "editType" : "edit", "file" : "ins_driver/ins_driver.cpp" }, { "editType" : "edit", "file" : "local_integ/localization_types.h" }, { "editType" : "edit", "file" : "sins/sins_types.h" }, { "editType" : "edit", "file" : "sins/strapdown_truck.cpp" }, { "editType" : "edit", "file" : "local_integ/measure_republish_process.cpp" }, { "editType" : "edit", "file" : "sins/sins.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sins/strapdown_truck.cpp" ], "commitId" : "11daf6cb984e9fe0a88e73f682fab0a6c6d227be", "timestamp" : 1767060428000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/matao", "fullName" : "matao" }, "authorEmail" : "matao@senior.auto", "comment" : "note_out: 太阳纸业固定点转弯航向问题\u000a", "date" : "2025-12-30 10:07:08 +0800", "id" : "11daf6cb984e9fe0a88e73f682fab0a6c6d227be", "msg" : "note_out: 太阳纸业固定点转弯航向问题", "paths" : [ { "editType" : "edit", "file" : "sins/strapdown_truck.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sins/strapdown_truck.cpp" ], "commitId" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "timestamp" : 1767150040000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/matao", "fullName" : "matao" }, "authorEmail" : "mt_0606@163.com", "comment" : "note_out: 太阳纸业固定点转弯航向问题修复\u000a", "date" : "2025-12-31 11:00:40 +0800", "id" : "412dbd771f2ba3cfa7cba6b191604939032c0fbf", "msg" : "note_out: 太阳纸业固定点转弯航向问题修复", "paths" : [ { "editType" : "edit", "file" : "sins/strapdown_truck.cpp" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "include/peripheral_controller_qingdaoxl.h", "src/peripheral_controller_qingdaoxl.cpp" ], "commitId" : "6cc2b839d35da774f9be6bd1b5fa05f1497a115d", "timestamp" : 1762509340000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "feat_out:车速不为0时拒绝上装指令\u000a", "date" : "2025-11-07 17:55:40 +0800", "id" : "6cc2b839d35da774f9be6bd1b5fa05f1497a115d", "msg" : "feat_out:车速不为0时拒绝上装指令", "paths" : [ { "editType" : "edit", "file" : "include/peripheral_controller_qingdaoxl.h" }, { "editType" : "edit", "file" : "src/peripheral_controller_qingdaoxl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/peripheral_controller_qingdaoxl.cpp" ], "commitId" : "e21f6367432cd7633f3a530a81e50fc287c019a8", "timestamp" : 1762853985000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "fix_bug:自动状态车速不更新问题\u000a", "date" : "2025-11-11 17:39:45 +0800", "id" : "e21f6367432cd7633f3a530a81e50fc287c019a8", "msg" : "fix_bug:自动状态车速不更新问题", "paths" : [ { "editType" : "edit", "file" : "src/peripheral_controller_qingdaoxl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/CanFrame/can_adaptor.h" ], "commitId" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "timestamp" : 1763983826000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "feat_out:适配canfd64个字节\u000a", "date" : "2025-11-24 19:30:26 +0800", "id" : "b4ebd00f6ff7e6cfb28371febaab598c47d1ff06", "msg" : "feat_out:适配canfd64个字节", "paths" : [ { "editType" : "edit", "file" : "src/CanFrame/can_adaptor.h" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "node_manager_app/node_manager.h", "node_manager_app/process_manager.cpp", "node_manager_app/node_manager.cpp" ], "commitId" : "eaf9ee10a7344ef610231681743fb0c9afe5d0bb", "timestamp" : 1769591255000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "feat_out:录包整分钟启动\u000a", "date" : "2026-01-28 17:07:35 +0800", "id" : "eaf9ee10a7344ef610231681743fb0c9afe5d0bb", "msg" : "feat_out:录包整分钟启动", "paths" : [ { "editType" : "edit", "file" : "node_manager_app/node_manager.cpp" }, { "editType" : "edit", "file" : "node_manager_app/process_manager.cpp" }, { "editType" : "edit", "file" : "node_manager_app/node_manager.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "CMakeLists.txt", "node_manager_app/CMakeLists.txt" ], "commitId" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "timestamp" : 1769591465000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "feat_out:增加消息版本号\u000a", "date" : "2026-01-28 17:11:05 +0800", "id" : "835d3ca7574a238a58e8cac8a1eead3652e8fa6f", "msg" : "feat_out:增加消息版本号", "paths" : [ { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "node_manager_app/CMakeLists.txt" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "thirdparty/gjk/gjk.hpp", "algorithm/plan/trajectories_collistion_detection.cpp", "algorithm/plan/trajectories_collistion_detection.hpp" ], "commitId" : "906615c00669d598322f728428d96e27547aae36", "timestamp" : 1752572226000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add gjk\u000a\u000a", "date" : "2025-07-15 17:37:06 +0800", "id" : "906615c00669d598322f728428d96e27547aae36", "msg" : "fix: add gjk", "paths" : [ { "editType" : "add", "file" : "thirdparty/gjk/gjk.hpp" }, { "editType" : "edit", "file" : "algorithm/plan/trajectories_collistion_detection.cpp" }, { "editType" : "edit", "file" : "algorithm/plan/trajectories_collistion_detection.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/semantic/semantic.cpp", "algorithm/decision/longitudinal_decision_3.cpp", "decision/process/proc_longitudinal_decision.cpp", "algorithm/decision/simulator/forward_simulation.hpp", "data/semantic/semantic_description.cpp", "algorithm/decision/simulator/forward_simulation.cpp", "data/semantic/semantic_description.hpp", "algorithm/decision/risk_aware_contingency_planning.cpp", "data/semantic/semantic.hpp", "tasks/deciders/long_decider/constrain_decider.cpp", "algorithm/decision/longitudinal_decision_3.hpp" ], "commitId" : "d1cb7d28b0f4cca6686dbb81440ecf160d547fa6", "timestamp" : 1755501070000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add DECELERATION.\u000a\u000a", "date" : "2025-08-18 15:11:10 +0800", "id" : "d1cb7d28b0f4cca6686dbb81440ecf160d547fa6", "msg" : "fix: add DECELERATION.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.hpp" }, { "editType" : "edit", "file" : "decision/process/proc_longitudinal_decision.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/risk_aware_contingency_planning.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.hpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.hpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/decision/simulator/forward_simulation.cpp" ], "commitId" : "5c41119f452db3df32b83bb24b8da00cfee962b0", "timestamp" : 1755571542000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: forward_simulation bug.\u000a\u000a", "date" : "2025-08-19 10:45:42 +0800", "id" : "5c41119f452db3df32b83bb24b8da00cfee962b0", "msg" : "fix: forward_simulation bug.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.hpp", "data/ctrl/lka_start_up.cpp", "data/config/cfg_env_const.cpp" ], "commitId" : "eb4c354eb675fd306649afc8863381a85a7a7ca2", "timestamp" : 1755677635000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lka_deviation using yard_name.\u000a\u000a", "date" : "2025-08-20 16:13:55 +0800", "id" : "eb4c354eb675fd306649afc8863381a85a7a7ca2", "msg" : "fix: lka_deviation using yard_name.", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/load_snap_data.cpp", "replayer/logic.cpp" ], "commitId" : "6a7c0c1f1256ea297554c19656be5cd3a1844cbb", "timestamp" : 1755828823000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: hmi load map.\u000a\u000a", "date" : "2025-08-22 10:13:43 +0800", "id" : "6a7c0c1f1256ea297554c19656be5cd3a1844cbb", "msg" : "fix: hmi load map.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" }, { "editType" : "edit", "file" : "replayer/logic.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/semantic/semantic.cpp", "hmi/draw/draw_constrain.cpp", "algorithm/decision/longitudinal_decision_3.cpp", "data/config/cfg_decision.hpp", "algorithm/decision/simulator/forward_simulation.hpp", "data/semantic/semantic_description.cpp", "algorithm/decision/simulator/forward_simulation.cpp", "data/config/cfg_decision.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/semantic/semantic.hpp", "algorithm/decision/risk_aware_contingency_planning.cpp", "algorithm/decision/risk_aware_contingency_planning.hpp" ], "commitId" : "cf1450cc4fae462e78c7d8ffd210d3dbc23aa72b", "timestamp" : 1756088018000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: deceleration state optimization.\u000a\u000a", "date" : "2025-08-25 10:13:38 +0800", "id" : "cf1450cc4fae462e78c7d8ffd210d3dbc23aa72b", "msg" : "fix: deceleration state optimization.", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_constrain.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.hpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/risk_aware_contingency_planning.hpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_decision.hpp" }, { "editType" : "edit", "file" : "algorithm/decision/risk_aware_contingency_planning.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_decision.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "9b614619623e61604b223095ee616f6881cb8d5d", "timestamp" : 1756270729000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: semantic_type in replayer.\u000a\u000a", "date" : "2025-08-27 12:58:49 +0800", "id" : "9b614619623e61604b223095ee616f6881cb8d5d", "msg" : "fix: semantic_type in replayer.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/decision/simulator/forward_simulation.cpp" ], "commitId" : "7335dd82a9f8cec27b80b348e07b9e632fd40c89", "timestamp" : 1756274188000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: forward_simulator bug.\u000a\u000a", "date" : "2025-08-27 13:56:28 +0800", "id" : "7335dd82a9f8cec27b80b348e07b9e632fd40c89", "msg" : "fix: forward_simulator bug.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/semantic/semantic.cpp", "algorithm/decision/longitudinal_decision_3.cpp", "data/semantic/semantic_description.cpp", "algorithm/decision/longitudinal_decision_3.hpp" ], "commitId" : "33f26be45f337fcd60163d8b4077b94fad8974b9", "timestamp" : 1756274231000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: decision logic.\u000a\u000a", "date" : "2025-08-27 13:57:11 +0800", "id" : "33f26be45f337fcd60163d8b4077b94fad8974b9", "msg" : "fix: decision logic.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_decision.cpp" ], "commitId" : "ab6b561634e63417e09c5b7b6e05f3962a20824c", "timestamp" : 1756274252000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: decision parameters.\u000a\u000a", "date" : "2025-08-27 13:57:32 +0800", "id" : "ab6b561634e63417e09c5b7b6e05f3962a20824c", "msg" : "fix: decision parameters.", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_decision.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/lka_start_up.cpp", "data/config/cfg_env_const.hpp", "data/config/cfg_env_const.cpp" ], "commitId" : "3e34a1c48e49de268af5b961ed6c9d481a327ada", "timestamp" : 1756372214000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: update lka_deviation_region.\u000a\u000a", "date" : "2025-08-28 17:10:14 +0800", "id" : "3e34a1c48e49de268af5b961ed6c9d481a327ada", "msg" : "fix: update lka_deviation_region.", "paths" : [ { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_ctrl_reference.cpp", "data/config/cfg_env_const.hpp", "data/ctrl/lka_start_up.cpp", "data/config/cfg_lat_plan.hpp", "data/config/cfg_lat_plan.cpp", "data/config/cfg_env_const.cpp", "sink/ros_sink_ctrl_reference.hpp" ], "commitId" : "04ee538f5352762a8e72d69633cade008e4cf8f1", "timestamp" : 1756435067000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add deviation around stacker/dest.\u000a\u000a", "date" : "2025-08-29 10:37:47 +0800", "id" : "04ee538f5352762a8e72d69633cade008e4cf8f1", "msg" : "fix: add deviation around stacker/dest.", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_ctrl_reference.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_ctrl_reference.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp" ], "commitId" : "9df7fb4796ddb76ef2b019e37718c6e820fcbae8", "timestamp" : 1756459706000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca path length\u000a\u000a", "date" : "2025-08-29 17:28:26 +0800", "id" : "9df7fb4796ddb76ef2b019e37718c6e820fcbae8", "msg" : "fix: wbca path length", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/driving_corridor.cpp", "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp" ], "commitId" : "176e42c70295df499e53fd91774d2e7c0ba57d66", "timestamp" : 1757311806000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix:add driving_corridor_ogm_dilate_size\u000a\u000a", "date" : "2025-09-08 14:10:06 +0800", "id" : "176e42c70295df499e53fd91774d2e7c0ba57d66", "msg" : "fix:add driving_corridor_ogm_dilate_size", "paths" : [ { "editType" : "edit", "file" : "data/boundary/driving_corridor.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp", "data/boundary/road_boundary.hpp" ], "commitId" : "3f20ff28a95ebaea5c3a33385daad999133ee23c", "timestamp" : 1757397282000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: boundary shift in yard.\u000a\u000a", "date" : "2025-09-09 13:54:42 +0800", "id" : "3f20ff28a95ebaea5c3a33385daad999133ee23c", "msg" : "fix: boundary shift in yard.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/lka_start_up.cpp", "data/config/cfg_func_sw.hpp", "data/config/cfg_func_sw.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "ac185a48aaa9e8111c6671c977db017290246cac", "timestamp" : 1757400487000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add usef_func_after_destination_wbca_no_shift_mode.\u000a\u000a", "date" : "2025-09-09 14:48:07 +0800", "id" : "ac185a48aaa9e8111c6671c977db017290246cac", "msg" : "fix: add usef_func_after_destination_wbca_no_shift_mode.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.cpp" }, { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp" ], "commitId" : "de2de9daf9efceea02e1ca3509cd9cadf3da065d", "timestamp" : 1757471673000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lattice error for lon_decision deceleration.\u000a\u000a", "date" : "2025-09-10 10:34:33 +0800", "id" : "de2de9daf9efceea02e1ca3509cd9cadf3da065d", "msg" : "fix: lattice error for lon_decision deceleration.", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "53fd5799210ff8c1c0bdc87f184e4ef79afda950", "timestamp" : 1757474205000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: shif out yard.\u000a\u000a", "date" : "2025-09-10 11:16:45 +0800", "id" : "53fd5799210ff8c1c0bdc87f184e4ef79afda950", "msg" : "fix: shif out yard.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "24ce590c5c078608bba7bf169f2633a8cb992d83", "timestamp" : 1757475111000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: shift into&out yard\u000a\u000a", "date" : "2025-09-10 11:31:51 +0800", "id" : "24ce590c5c078608bba7bf169f2633a8cb992d83", "msg" : "fix: shift into&out yard", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp" ], "commitId" : "d6cba6af1e38625419cfb1ebacd9a9735a977938", "timestamp" : 1757582422000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lattice error for lon_decision deceleration.\u000a\u000a", "date" : "2025-09-11 17:20:22 +0800", "id" : "d6cba6af1e38625419cfb1ebacd9a9735a977938", "msg" : "fix: lattice error for lon_decision deceleration.", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/decision/semantic_set_transformation_2.cpp" ], "commitId" : "cc91c797895b505945d59db91064e7fe03c2c0c0", "timestamp" : 1757667217000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lon_decision for car.\u000a\u000a", "date" : "2025-09-12 16:53:37 +0800", "id" : "cc91c797895b505945d59db91064e7fe03c2c0c0", "msg" : "fix: lon_decision for car.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/semantic_set_transformation_2.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/decision/path_collision_detection.cpp" ], "commitId" : "63e19eeb671e7422192ef300b8d2d48d377392d2", "timestamp" : 1757667237000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using backward obstacle in lane changing lon_decision.\u000a\u000a", "date" : "2025-09-12 16:53:57 +0800", "id" : "63e19eeb671e7422192ef300b8d2d48d377392d2", "msg" : "fix: using backward obstacle in lane changing lon_decision.", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/path_collision_detection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/lka_start_up.cpp" ], "commitId" : "f317e042fe7f82d3226fd35c0e52899cf182f304", "timestamp" : 1758024881000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lka deviation for out_yard region.\u000a\u000a", "date" : "2025-09-16 20:14:41 +0800", "id" : "f317e042fe7f82d3226fd35c0e52899cf182f304", "msg" : "fix: lka deviation for out_yard region.", "paths" : [ { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/other_tasks/stitch_path_data_to_path.cpp" ], "commitId" : "0403dd6ea8ece72f86e2b340b1c2a947d41db31f", "timestamp" : 1758685102000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using last_path when out_yard wbca failed.\u000a\u000a", "date" : "2025-09-24 11:38:22 +0800", "id" : "0403dd6ea8ece72f86e2b340b1c2a947d41db31f", "msg" : "fix: using last_path when out_yard wbca failed.", "paths" : [ { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "71acb7fdd90e867aef98a367b5570f773932b953", "timestamp" : 1758688793000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: correct imv crab mode conditions.\u000a\u000a", "date" : "2025-09-24 12:39:53 +0800", "id" : "71acb7fdd90e867aef98a367b5570f773932b953", "msg" : "fix: correct imv crab mode conditions.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/lka_start_up.cpp" ], "commitId" : "6c835957075226cf70e6ec7cd282ff4e5cff7d35", "timestamp" : 1758802758000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lka deviation through yard.\u000a\u000a", "date" : "2025-09-25 20:19:18 +0800", "id" : "6c835957075226cf70e6ec7cd282ff4e5cff7d35", "msg" : "fix: lka deviation through yard.", "paths" : [ { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "9f36a4098e80a2d4bb0dd6607210c977d62424c4", "timestamp" : 1758868040000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: disable wbca smooth mode for seaside buffer.\u000a\u000a", "date" : "2025-09-26 14:27:20 +0800", "id" : "9f36a4098e80a2d4bb0dd6607210c977d62424c4", "msg" : "fix: disable wbca smooth mode for seaside buffer.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/lane_detection.hpp", "replayer/replayer_data_process/replayer_data_extraction.cpp", "data/vehicle/lane_detection.cpp" ], "commitId" : "41e1611183895b21ba9b361cf660aa26be30876f", "timestamp" : 1760089318000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: extract lane_pts msg in replayer.\u000a\u000a", "date" : "2025-10-10 17:41:58 +0800", "id" : "41e1611183895b21ba9b361cf660aa26be30876f", "msg" : "fix: extract lane_pts msg in replayer.", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/lane_detection.hpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_extraction.cpp" }, { "editType" : "edit", "file" : "data/vehicle/lane_detection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "443db1d333dcd07a1948a35e41a9d09403e9f453", "timestamp" : 1760515071000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复崩溃的bug\u000a\u000a", "date" : "2025-10-15 15:57:51 +0800", "id" : "443db1d333dcd07a1948a35e41a9d09403e9f453", "msg" : "fix:修复崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "b5b15d2395450622819183e92e46b261af48aed7", "timestamp" : 1760515101000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复崩溃的bug\u000a\u000a", "date" : "2025-10-15 15:58:21 +0800", "id" : "b5b15d2395450622819183e92e46b261af48aed7", "msg" : "fix:修复崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/obstacle/block.hpp", "data/constrain/block_data.cpp", "data/constrain/disable_stop_range.cpp", "data/constrain/disable_stop_range.hpp", "data/constrain/temporary_stop_data.cpp", "hmi/widget/distance.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "common/util/hdmap_wrapper.cpp", "data/constrain/block_data.hpp", "data/obstacle/block.cpp", "hmi/draw/draw_blocks.hpp" ], "commitId" : "db34608a50a96a3b765d3406a955ccc71bdb97cd", "timestamp" : 1760603944000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化关路禁停\u000a\u000a", "date" : "2025-10-16 16:39:04 +0800", "id" : "db34608a50a96a3b765d3406a955ccc71bdb97cd", "msg" : "refactor:优化关路禁停", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/block.hpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.hpp" }, { "editType" : "edit", "file" : "data/constrain/disable_stop_range.hpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "common/util/hdmap_wrapper.cpp" }, { "editType" : "edit", "file" : "data/constrain/temporary_stop_data.cpp" }, { "editType" : "edit", "file" : "data/constrain/disable_stop_range.cpp" }, { "editType" : "edit", "file" : "hmi/widget/distance.cpp" }, { "editType" : "edit", "file" : "data/obstacle/block.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_blocks.hpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/cost_features/heading_constraint.h", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "37494cf9ceaa19fcb1de4c5ef307cd1fe29f1114", "timestamp" : 1760701446000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: ssep: 1.增加进堆场时终点选择逻辑 - 优先选择宽阔的区域作为终点，提前把挂车甩直。2. keb_optimizer加上最后一段直线的约束\u000a\u000a", "date" : "2025-10-17 19:44:06 +0800", "id" : "37494cf9ceaa19fcb1de4c5ef307cd1fe29f1114", "msg" : "chore: ssep: 1.增加进堆场时终点选择逻辑 - 优先选择宽阔的区域作为终点，提前把挂车甩直。2. keb_optimizer加上最后一段直线的约束", "paths" : [ { "editType" : "add", "file" : "ssep/keb_optimizer/cost_features/heading_constraint.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/def/ssep_scenario_type.hpp", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h", "ssep/keb_optimizer/keb_problem.h", "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.cc", "ssep/ssep_planner.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "data/ssep/ssep_ec.cpp", "ssep/coarse_search/hybrid_a_star.hpp", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "17edfc25da7b888891d65be542555d86e544b2d4", "timestamp" : 1760967165000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: ssep: 新增低贝位搜索模式 -- 在进入窄通道前把挂甩直。适配杨浦场景。\u000a\u000a", "date" : "2025-10-20 21:32:45 +0800", "id" : "17edfc25da7b888891d65be542555d86e544b2d4", "msg" : "feat: ssep: 新增低贝位搜索模式 -- 在进入窄通道前把挂甩直。适配杨浦场景。", "paths" : [ { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "ssep/common/def/ssep_scenario_type.hpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/hybrid_a_star.hpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/linear_velocity_generator.cpp" ], "commitId" : "53d9a2d8cf925f083909dd85d1283369947f0da0", "timestamp" : 1761013068000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : " fix: max_acc = 0.5 for wbca velocity reference.\u000a\u000a", "date" : "2025-10-21 10:17:48 +0800", "id" : "53d9a2d8cf925f083909dd85d1283369947f0da0", "msg" : "fix: max_acc = 0.5 for wbca velocity reference.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/linear_velocity_generator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/lane_detection.hpp", "data/vehicle/lane_detection.cpp" ], "commitId" : "ff40eb3cfd659cebcd4cb39d803ead4d883e7fde", "timestamp" : 1761030511000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: lane_pts deviation calculation.\u000a", "date" : "2025-10-21 15:08:31 +0800", "id" : "ff40eb3cfd659cebcd4cb39d803ead4d883e7fde", "msg" : "fix: lane_pts deviation calculation.", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/lane_detection.cpp" }, { "editType" : "edit", "file" : "data/vehicle/lane_detection.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_lane_constrain.hpp", "plan/prepare/prepare_lane_constrain.cpp", "data/vehicle/lane_detection.cpp" ], "commitId" : "dc6cb921131c2f38a5916568211a3abbc14d1857", "timestamp" : 1761030942000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: lane_pts debug msg.\u000a\u000a", "date" : "2025-10-21 15:15:42 +0800", "id" : "dc6cb921131c2f38a5916568211a3abbc14d1857", "msg" : "feat: lane_pts debug msg.", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_lane_constrain.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_lane_constrain.hpp" }, { "editType" : "edit", "file" : "data/vehicle/lane_detection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/load_snap_data.cpp", "replayer/logic.cpp" ], "commitId" : "0652ba3fd0d300c5fb654b91d600204d0f9b7965", "timestamp" : 1761116110000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: hmi load map.\u000a\u000a", "date" : "2025-10-22 14:55:10 +0800", "id" : "0652ba3fd0d300c5fb654b91d600204d0f9b7965", "msg" : "fix: hmi load map.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" }, { "editType" : "edit", "file" : "replayer/logic.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.hpp", "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "f2caa4e92486ae2aace98348c71dc719135c57c6", "timestamp" : 1761116119000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat_out: path_opt in replayer.\u000a\u000a", "date" : "2025-10-22 14:55:19 +0800", "id" : "f2caa4e92486ae2aace98348c71dc719135c57c6", "msg" : "feat_out: path_opt in replayer.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.hpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/linear_velocity_generator.cpp" ], "commitId" : "71bb7033676887623afb24fdf144682c2d2c5c04", "timestamp" : 1761116129000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: velocity profile exception.\u000a\u000a", "date" : "2025-10-22 14:55:29 +0800", "id" : "71bb7033676887623afb24fdf144682c2d2c5c04", "msg" : "fix: velocity profile exception.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/linear_velocity_generator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/wbca_manager.hpp", "tasks/plan/path_optimization_task.cpp" ], "commitId" : "adc4f96834723bdbdc725c6ccd8fc25c13e3cf83", "timestamp" : 1761116137000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: delete history in smooth mode.\u000a\u000a", "date" : "2025-10-22 14:55:37 +0800", "id" : "adc4f96834723bdbdc725c6ccd8fc25c13e3cf83", "msg" : "fix: delete history in smooth mode.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/reference/center_line.cpp" ], "commitId" : "1c0c0a643c7fe06365f5b68d0853658c92f6737a", "timestamp" : 1761189165000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复封路变道的bug\u000a\u000a", "date" : "2025-10-23 11:12:45 +0800", "id" : "1c0c0a643c7fe06365f5b68d0853658c92f6737a", "msg" : "fix:修复封路变道的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/reference/center_line.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "9733db6296966bca07437fb19d466f21e726479c", "timestamp" : 1761189172000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:引桥前变道的bug\u000a\u000a", "date" : "2025-10-23 11:12:52 +0800", "id" : "9733db6296966bca07437fb19d466f21e726479c", "msg" : "fix:引桥前变道的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "78758691721563c6788d48c9ddd295cd9d54c6cd", "timestamp" : 1761189305000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:可能崩溃的bug\u000a", "date" : "2025-10-23 11:15:05 +0800", "id" : "78758691721563c6788d48c9ddd295cd9d54c6cd", "msg" : "fix:可能崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "03885065165bc2d82696de044177b070eb6c2c12", "timestamp" : 1761190682000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复合并的bug\u000a\u000a", "date" : "2025-10-23 11:38:02 +0800", "id" : "03885065165bc2d82696de044177b070eb6c2c12", "msg" : "fix:修复合并的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "505c1b4bb5f81d459859a75090d122b02ed51f6b", "timestamp" : 1761190775000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复合并的bug\u000a\u000a", "date" : "2025-10-23 11:39:35 +0800", "id" : "505c1b4bb5f81d459859a75090d122b02ed51f6b", "msg" : "fix:修复合并的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/truck_wbca_manager.cpp" ], "commitId" : "b71349f8c40f412fd26fa7afe1dfe224909ce298", "timestamp" : 1761291569000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using maximum vehicle size in WBCA\u000a\u000a", "date" : "2025-10-24 15:39:29 +0800", "id" : "b71349f8c40f412fd26fa7afe1dfe224909ce298", "msg" : "fix: using maximum vehicle size in WBCA", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/truck_wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp" ], "commitId" : "c7d55549d1fa29cc760a8efdb29a40e01d6d9147", "timestamp" : 1761554869000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:人工对准误创建约束\u000a\u000a", "date" : "2025-10-27 16:47:49 +0800", "id" : "c7d55549d1fa29cc760a8efdb29a40e01d6d9147", "msg" : "fix:人工对准误创建约束", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/linear_velocity_generator.cpp", "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "989f398e8adb5e6717f375d999ae8796c7291e1f", "timestamp" : 1761632303000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: abandon last segment in wbca.\u000a\u000a", "date" : "2025-10-28 14:18:23 +0800", "id" : "989f398e8adb5e6717f375d999ae8796c7291e1f", "msg" : "fix: abandon last segment in wbca.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/linear_velocity_generator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_plan_debug.cpp" ], "commitId" : "fb99858d9895067e53c9e2dd819ca1900a4977fa", "timestamp" : 1761632320000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca debug msg.\u000a\u000a", "date" : "2025-10-28 14:18:40 +0800", "id" : "fb99858d9895067e53c9e2dd819ca1900a4977fa", "msg" : "fix: wbca debug msg.", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_plan_debug.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/linear_velocity_generator.cpp" ], "commitId" : "7eb65d8fad4428ff65a4ebb59279aace6786fefe", "timestamp" : 1761632325000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: end_velocity for wbca calc exception.\u000a\u000a", "date" : "2025-10-28 14:18:45 +0800", "id" : "7eb65d8fad4428ff65a4ebb59279aace6786fefe", "msg" : "fix: end_velocity for wbca calc exception.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/linear_velocity_generator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/linear_velocity_generator.cpp" ], "commitId" : "efe843eebc0988353431642b93a7e3baf0bacd75", "timestamp" : 1761632342000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: velocity profile exception.\u000a\u000a", "date" : "2025-10-28 14:19:02 +0800", "id" : "efe843eebc0988353431642b93a7e3baf0bacd75", "msg" : "fix: velocity profile exception.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/linear_velocity_generator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_plan_debug.cpp" ], "commitId" : "a6f28bf0226b3f41baf0866845c7af0849a43fac", "timestamp" : 1761632347000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add wbca debug var.\u000a\u000a", "date" : "2025-10-28 14:19:07 +0800", "id" : "a6f28bf0226b3f41baf0866845c7af0849a43fac", "msg" : "fix: add wbca debug var.", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_plan_debug.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/truck_path_optimization.cpp", "algorithm/wbca/path_optimization/path_optimization.cpp", "algorithm/wbca/path_optimization/car_path_optimization.cpp" ], "commitId" : "4ab3db2e9d48be5657090e0a0dd586ae81c83607", "timestamp" : 1761632439000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add lateral acc cost.\u000a\u000a", "date" : "2025-10-28 14:20:39 +0800", "id" : "4ab3db2e9d48be5657090e0a0dd586ae81c83607", "msg" : "fix: add lateral acc cost.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/car_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/truck_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/wbca/wbca_data.hpp", "algorithm/wbca/imv_wbca_manager.cpp" ], "commitId" : "d00c94af2933638c8784fe5d5c844e8cf06af561", "timestamp" : 1761632879000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add wbca cost and time_consuming.\u000a", "date" : "2025-10-28 14:27:59 +0800", "id" : "d00c94af2933638c8784fe5d5c844e8cf06af561", "msg" : "fix: add wbca cost and time_consuming.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/wbca/wbca_data.hpp", "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/imv_wbca_manager.cpp" ], "commitId" : "cddefcea61b2b710fcf223bcc9c374fa54c13a86", "timestamp" : 1761632959000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add wbca cost and time_consuming.\u000a", "date" : "2025-10-28 14:29:19 +0800", "id" : "cddefcea61b2b710fcf223bcc9c374fa54c13a86", "msg" : "fix: add wbca cost and time_consuming.", "paths" : [ { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/truck_path_optimization.cpp", "algorithm/wbca/path_optimization/path_optimization.cpp", "algorithm/wbca/path_optimization/car_path_optimization.cpp" ], "commitId" : "52d4eff1db1a0f22867f43d3caa133ac53e05a07", "timestamp" : 1761634707000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add lateral acc cost.\u000a\u000a", "date" : "2025-10-28 14:58:27 +0800", "id" : "52d4eff1db1a0f22867f43d3caa133ac53e05a07", "msg" : "fix: add lateral acc cost.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/truck_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/car_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.hpp", "data/app/cmd/cmd_align.cpp", "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.cpp" ], "commitId" : "764457e161b26f99e4429ee95910810707655019", "timestamp" : 1761642899000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加根据定位值的倒车防护，防治对准时，跟着桥走.\u000a\u000a", "date" : "2025-10-28 17:14:59 +0800", "id" : "764457e161b26f99e4429ee95910810707655019", "msg" : "feat:添加根据定位值的倒车防护，防治对准时，跟着桥走.", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_align.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.hpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/decide/decide_reaction.hpp", "data/scenario/scenario_manager.hpp", "tasks/deciders/other_decider/replan_decider.cpp", "tasks/deciders/search_decider/normal_junction_search_decider.cpp", "tasks/deciders/other_decider/replan_decider.hpp", "data/scenario/scenario_manager.cpp" ], "commitId" : "41f63bb85f70821a416316f2deeee080a82bc422", "timestamp" : 1761747413000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复连续普通路口搜索的bug\u000a\u000a", "date" : "2025-10-29 22:16:53 +0800", "id" : "41f63bb85f70821a416316f2deeee080a82bc422", "msg" : "fix:修复连续普通路口搜索的bug", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/search_decider/normal_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/replan_decider.hpp" }, { "editType" : "edit", "file" : "data/decide/decide_reaction.hpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_manager.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/replan_decider.cpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_manager.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/occupancy_grid_map/data_render.cpp" ], "commitId" : "393ff4b1567e26e1f160662e1dd0d3745b23f499", "timestamp" : 1761825548000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca bd expanding.\u000a\u000a", "date" : "2025-10-30 19:59:08 +0800", "id" : "393ff4b1567e26e1f160662e1dd0d3745b23f499", "msg" : "fix: wbca bd expanding.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/occupancy_grid_map/data_render.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "c0482707461266a3e3a894eb153bd2a8d4dfda99", "timestamp" : 1762180136000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整搜索终点位置\u000a\u000a", "date" : "2025-11-03 22:28:56 +0800", "id" : "c0482707461266a3e3a894eb153bd2a8d4dfda99", "msg" : "feat:调整搜索终点位置", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/temporary_stop_data.cpp", "data/constrain/block_data.cpp", "math/util/algebra.hpp", "math/util/algebra.cpp" ], "commitId" : "3769459fde93fb52325f104384f270dc718a7a29", "timestamp" : 1762180211000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:堆高机作业关路重叠时，合并\u000a\u000a", "date" : "2025-11-03 22:30:11 +0800", "id" : "3769459fde93fb52325f104384f270dc718a7a29", "msg" : "feat:堆高机作业关路重叠时，合并", "paths" : [ { "editType" : "edit", "file" : "data/constrain/temporary_stop_data.cpp" }, { "editType" : "edit", "file" : "math/util/algebra.hpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "math/util/algebra.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/request_routing_data.cpp" ], "commitId" : "dec0413981b3ec63e201c15eefb6441fe6ea2c0a", "timestamp" : 1762223714000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:park lock下 不校验地图\u000a\u000a", "date" : "2025-11-04 10:35:14 +0800", "id" : "dec0413981b3ec63e201c15eefb6441fe6ea2c0a", "msg" : "feat:park lock下 不校验地图", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/request_routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "30c9ab2346df388fb00035aac7f1740f709407a4", "timestamp" : 1762256336000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整出堆场口的约束创建\u000a\u000a", "date" : "2025-11-04 19:38:56 +0800", "id" : "30c9ab2346df388fb00035aac7f1740f709407a4", "msg" : "feat:调整出堆场口的约束创建", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "544b9dc994076be0386adbcb3b95b8622df06579", "timestamp" : 1762345095000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复因为距离阈值，带来场景识别错误的bug\u000a\u000a", "date" : "2025-11-05 20:18:15 +0800", "id" : "544b9dc994076be0386adbcb3b95b8622df06579", "msg" : "fix:修复因为距离阈值，带来场景识别错误的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "06bfc6322b63aaf658ee8bb0828a873833bba909", "timestamp" : 1762345281000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复终点距离计算的bug\u000a", "date" : "2025-11-05 20:21:21 +0800", "id" : "06bfc6322b63aaf658ee8bb0828a873833bba909", "msg" : "fix:修复终点距离计算的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp", "data/plan/switch_data.cpp" ], "commitId" : "5c80f07840fa07c76ae26c093ee585cb0d1aa9a3", "timestamp" : 1762345372000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复海润进弯道后第一个停车位停不正的bug\u000a", "date" : "2025-11-05 20:22:52 +0800", "id" : "5c80f07840fa07c76ae26c093ee585cb0d1aa9a3", "msg" : "fix:修复海润进弯道后第一个停车位停不正的bug", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "e4b53590f63add07d6ac719a8faa70eafb610f6c", "timestamp" : 1762397978000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复误触发open space的bug\u000a\u000a", "date" : "2025-11-06 10:59:38 +0800", "id" : "e4b53590f63add07d6ac719a8faa70eafb610f6c", "msg" : "fix:修复误触发open space的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp", "data/plan/guide_line.cpp" ], "commitId" : "96a8d6212cb59118851ff31273dabc6fc64a63fe", "timestamp" : 1762741020000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化动态搜索限速\u000a\u000a", "date" : "2025-11-10 10:17:00 +0800", "id" : "96a8d6212cb59118851ff31273dabc6fc64a63fe", "msg" : "refactor:优化动态搜索限速", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/semantic/semantic.cpp", "algorithm/decision/longitudinal_decision_3.cpp", "data/config/cfg_decision.hpp", "algorithm/decision/simulator/forward_simulation.hpp", "data/semantic/semantic_description.cpp", "algorithm/decision/simulator/forward_simulation.cpp", "data/config/cfg_decision.cpp", "data/semantic/semantic.hpp", "algorithm/decision/rule_base_behavior.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "algorithm/decision/semantic_set_transformation_2.cpp" ], "commitId" : "4e81a167aca0f81d3e5e8b0e924c8b7419efebd5", "timestamp" : 1762755656000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: lon_decision from SQ\u000a\u000a", "date" : "2025-11-10 14:20:56 +0800", "id" : "4e81a167aca0f81d3e5e8b0e924c8b7419efebd5", "msg" : "feat: lon_decision from SQ", "paths" : [ { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.hpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.hpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/rule_base_behavior.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_decision.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/semantic_set_transformation_2.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_decision.hpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/lattice/path_time_graph.cpp", "data/config/cfg_long_plan.hpp", "data/config/cfg_long_plan.cpp" ], "commitId" : "147d9f3b1fe5be1fb37588d6bcca491a816b522a", "timestamp" : 1762756677000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add min_safe_ttc\u000a\u000a", "date" : "2025-11-10 14:37:57 +0800", "id" : "147d9f3b1fe5be1fb37588d6bcca491a816b522a", "msg" : "fix: add min_safe_ttc", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_long_plan.hpp" }, { "editType" : "edit", "file" : "data/lattice/path_time_graph.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_long_plan.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "f074a761a574f268fb8e14617d5518c45908112a", "timestamp" : 1762760834000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: v_min_coef = 9.9 wbca\u000a\u000a", "date" : "2025-11-10 15:47:14 +0800", "id" : "f074a761a574f268fb8e14617d5518c45908112a", "msg" : "fix: v_min_coef = 9.9 wbca", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/constrain_decider.cpp" ], "commitId" : "29f933aad008ad55073d42d39716f22995f151bc", "timestamp" : 1762761513000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: disable dynamic and steering speed constraints\u000a\u000a", "date" : "2025-11-10 15:58:33 +0800", "id" : "29f933aad008ad55073d42d39716f22995f151bc", "msg" : "fix: disable dynamic and steering speed constraints", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_region.hpp", "data/config/cfg_region.cpp", "data/ssep/ssep_ec.cpp", "data/ssep/field_junction_ec.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "9c4082246969ff4baf4cbfb06d11709c34cdf927", "timestamp" : 1762949331000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配大港ssep\u000a\u000a", "date" : "2025-11-12 20:08:51 +0800", "id" : "9c4082246969ff4baf4cbfb06d11709c34cdf927", "msg" : "feat:适配大港ssep", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_region.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_region.hpp" }, { "editType" : "edit", "file" : "data/ssep/field_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp" ], "commitId" : "dce023d8157f0b2a2ae0a7b324c8c5250b4a7f6a", "timestamp" : 1763114034000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:堆场口禁停异常的bug\u000a\u000a", "date" : "2025-11-14 17:53:54 +0800", "id" : "dce023d8157f0b2a2ae0a7b324c8c5250b4a7f6a", "msg" : "fix:堆场口禁停异常的bug", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/driving_corridor.cpp", "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp" ], "commitId" : "d8b47444dc2bc732093b9d318f9ebd0f03cb62f9", "timestamp" : 1763630374000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: add drving_corridor_ogm_dilate_size_in_yard\u000a\u000a", "date" : "2025-11-20 17:19:34 +0800", "id" : "d8b47444dc2bc732093b9d318f9ebd0f03cb62f9", "msg" : "feat: add drving_corridor_ogm_dilate_size_in_yard", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "data/boundary/driving_corridor.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "6509f8cb5699501238d848477a07328f737e6555", "timestamp" : 1764231597000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: start up boundary optimization.\u000a\u000a", "date" : "2025-11-27 16:19:57 +0800", "id" : "6509f8cb5699501238d848477a07328f737e6555", "msg" : "fix: start up boundary optimization.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "552ccecd73faa3385226f0e39bf1367abeaa75c2", "timestamp" : 1764232886000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: stacker crane wbca smooth mode thr.\u000a\u000a", "date" : "2025-11-27 16:41:26 +0800", "id" : "552ccecd73faa3385226f0e39bf1367abeaa75c2", "msg" : "fix: stacker crane wbca smooth mode thr.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "793bab2770b6ae3b1ecc8197703f35a96bbba5cd", "timestamp" : 1764238176000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: low bay operation smooth\u000a\u000a", "date" : "2025-11-27 18:09:36 +0800", "id" : "793bab2770b6ae3b1ecc8197703f35a96bbba5cd", "msg" : "feat: low bay operation smooth", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp" ], "commitId" : "3b08bf2c422b284cb3131c7392d288b38e55e8cc", "timestamp" : 1765867438000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca smoth_mode route interval\u000a\u000a", "date" : "2025-12-16 14:43:58 +0800", "id" : "3b08bf2c422b284cb3131c7392d288b38e55e8cc", "msg" : "fix: wbca smoth_mode route interval", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "29feecb4938c3e649b1d38e873b43426fb3c57df", "timestamp" : 1766139678000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: disable smooth mode in yard.\u000a\u000a", "date" : "2025-12-19 18:21:18 +0800", "id" : "29feecb4938c3e649b1d38e873b43426fb3c57df", "msg" : "fix: disable smooth mode in yard.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "a1e87467a1da5bc638192f250825135cdaa70087", "timestamp" : 1767595522000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: start_pt from last_path.\u000a\u000a", "date" : "2026-01-05 14:45:22 +0800", "id" : "a1e87467a1da5bc638192f250825135cdaa70087", "msg" : "fix: start_pt from last_path.", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/ssep_input_provider.cc", "ssep/offboard/scene_frame_provider.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc", "ssep/offboard/generate_scene_data/trim_scene_paths_cli.cc", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" ], "commitId" : "338a769cbefaa2e74bc5d68bd4a38dbf2113ba3c", "timestamp" : 1767598369000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 集卡多段倒车搜索器改进为双向搜索。复测威海、友谊关的问题场景，成功率100%\u000a\u000a", "date" : "2026-01-05 15:32:49 +0800", "id" : "338a769cbefaa2e74bc5d68bd4a38dbf2113ba3c", "msg" : "feat: SSEP: 集卡多段倒车搜索器改进为双向搜索。复测威海、友谊关的问题场景，成功率100%", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc" }, { "editType" : "edit", "file" : "ssep/offboard/scene_frame_provider.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/trim_scene_paths_cli.cc" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_input_provider.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/load_snap_data.cpp", "common/util/hdmap_wrapper.cpp", "replayer/logic.cpp" ], "commitId" : "2fa77475c73f757e92ca48b6d2c4f689e7376fdc", "timestamp" : 1767601620000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:连续载入快照崩溃的bug\u000a\u000a", "date" : "2026-01-05 16:27:00 +0800", "id" : "2fa77475c73f757e92ca48b6d2c4f689e7376fdc", "msg" : "fix:连续载入快照崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "common/util/hdmap_wrapper.cpp" }, { "editType" : "edit", "file" : "replayer/logic.cpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/truck_general_planner.h", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/legacy_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/scenarios/imv_pullover_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/scenarios/imv_exit_parking_spot_planner.h" ], "commitId" : "6d14adbd2676b9f700514425d7b866434ef14a37", "timestamp" : 1767603089000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复IMV PULLOVER场景最后一段不走直线的问题。\u000a\u000a", "date" : "2026-01-05 16:51:29 +0800", "id" : "6d14adbd2676b9f700514425d7b866434ef14a37", "msg" : "fix: SSEP: 修复IMV PULLOVER场景最后一段不走直线的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "8f80031d0d7637e98c5c75d87998ead69c977688", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: start_pt from last_path.\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "8f80031d0d7637e98c5c75d87998ead69c977688", "msg" : "fix: start_pt from last_path.", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/ssep_input_provider.cc", "ssep/offboard/scene_frame_provider.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc", "ssep/offboard/generate_scene_data/trim_scene_paths_cli.cc", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" ], "commitId" : "2dd84a30e8bc4d52ef1d2a64dd5dcc33bd1685dd", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: SSEP: 集卡多段倒车搜索器改进为双向搜索。复测威海、友谊关的问题场景，成功率100%\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "2dd84a30e8bc4d52ef1d2a64dd5dcc33bd1685dd", "msg" : "feat: SSEP: 集卡多段倒车搜索器改进为双向搜索。复测威海、友谊关的问题场景，成功率100%", "paths" : [ { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc" }, { "editType" : "edit", "file" : "ssep/offboard/scene_frame_provider.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_input_provider.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/trim_scene_paths_cli.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/load_snap_data.cpp", "common/util/hdmap_wrapper.cpp", "replayer/logic.cpp" ], "commitId" : "8c6ef2c84e5d34a150d3a1551045e2fa440c642d", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:连续载入快照崩溃的bug\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "8c6ef2c84e5d34a150d3a1551045e2fa440c642d", "msg" : "fix:连续载入快照崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "common/util/hdmap_wrapper.cpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" }, { "editType" : "edit", "file" : "replayer/logic.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/truck_general_planner.h", "ssep/scenarios/legacy_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/scenarios/imv_pullover_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/scenarios/imv_exit_parking_spot_planner.h" ], "commitId" : "1d03336637287a2db83e7072e91334373502b167", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: SSEP: 修复IMV PULLOVER场景最后一段不走直线的问题。\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "1d03336637287a2db83e7072e91334373502b167", "msg" : "fix: SSEP: 修复IMV PULLOVER场景最后一段不走直线的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/ssep/forward_ec.cpp", "data/config/cfg_env_const.cpp" ], "commitId" : "789ec4028b2a33883c841842faf1686cf1fe3b05", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:董家口靠边作业的问题\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "789ec4028b2a33883c841842faf1686cf1fe3b05", "msg" : "fix:董家口靠边作业的问题", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/other_tasks/stitch_path_data_to_path.cpp" ], "commitId" : "3ed68f77cd804238028515bf5a7aa49b385c324d", "timestamp" : 1767610153000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:wbca求解失败后，使用ssep路径带来的路径跳变问题\u000a\u000a", "date" : "2026-01-05 18:49:13 +0800", "id" : "3ed68f77cd804238028515bf5a7aa49b385c324d", "msg" : "feat:wbca求解失败后，使用ssep路径带来的路径跳变问题", "paths" : [ { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_safe_const.hpp", "data/constrain/block_data.cpp", "data/constrain/disable_stop_range.cpp", "data/constrain/disable_stop_range.hpp", "data/config/cfg_safe_const.cpp", "data/constrain/temporary_stop_data.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/constrain/block_data.hpp" ], "commitId" : "ac5fec5eea7a6a9c3520ba21ae2028944e7452bf", "timestamp" : 1767612595000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: add curvature over limit temp stop.\u000a\u000a", "date" : "2026-01-05 19:29:55 +0800", "id" : "ac5fec5eea7a6a9c3520ba21ae2028944e7452bf", "msg" : "fix: add curvature over limit temp stop.", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.hpp" }, { "editType" : "edit", "file" : "data/constrain/disable_stop_range.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/constrain/temporary_stop_data.cpp" }, { "editType" : "edit", "file" : "data/constrain/disable_stop_range.hpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_safe_const.cpp" ], "commitId" : "4a6df680159317e1c86c6b862322ee527d587dd1", "timestamp" : 1767612705000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: curvature_over_limit_stop_coefficient 10.0\u000a\u000a", "date" : "2026-01-05 19:31:45 +0800", "id" : "4a6df680159317e1c86c6b862322ee527d587dd1", "msg" : "fix: curvature_over_limit_stop_coefficient 10.0", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_activation.cpp", "ssep/common/utils/scene_frame_visualization.cc" ], "commitId" : "6f9d548a5a62a2c5dbbb473030c494fa41068025", "timestamp" : 1767612706000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP minor updates\u000a\u000a", "date" : "2026-01-05 19:31:46 +0800", "id" : "6f9d548a5a62a2c5dbbb473030c494fa41068025", "msg" : "chore: SSEP minor updates", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "ssep/common/utils/scene_frame_visualization.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "e44350fef4a97e9401ba111fe8f1724a0f67adc6", "timestamp" : 1767617649000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: truck start_pt exception.\u000a\u000a", "date" : "2026-01-05 20:54:09 +0800", "id" : "e44350fef4a97e9401ba111fe8f1724a0f67adc6", "msg" : "fix: truck start_pt exception.", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp", "hmi/widget/distance.cpp" ], "commitId" : "ba992138c997f6f6b70328429e12c07c9aa28d7a", "timestamp" : 1767626818000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:曲率超限停车优化\u000a\u000a", "date" : "2026-01-05 23:26:58 +0800", "id" : "ba992138c997f6f6b70328429e12c07c9aa28d7a", "msg" : "feat:曲率超限停车优化", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "hmi/widget/distance.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp", "data/other/flow_control.cpp", "data/app/fsm/task_fsm/task_fsm.cpp", "data/ssep/forward_ec.cpp", "tasks/other_tasks/create_reference_line.cpp", "data/plan/guide_line.cpp" ], "commitId" : "603d6e35a3c1e774ef27fad9e031f796025ab64a", "timestamp" : 1767626901000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:travel out 没有一次规划的适配\u000a\u000a", "date" : "2026-01-05 23:28:21 +0800", "id" : "603d6e35a3c1e774ef27fad9e031f796025ab64a", "msg" : "feat:travel out 没有一次规划的适配", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/create_reference_line.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/config/cfg_env_const.cpp", "data/ssep/forward_ec.cpp" ], "commitId" : "c8f1bbf9716afdacb9b3cd0748ed279c3e163e75", "timestamp" : 1767627086000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:董家口靠边作业的问题\u000a\u000a", "date" : "2026-01-05 23:31:26 +0800", "id" : "c8f1bbf9716afdacb9b3cd0748ed279c3e163e75", "msg" : "fix:董家口靠边作业的问题", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/other_tasks/stitch_path_data_to_path.cpp" ], "commitId" : "020e0a83e2c76c9a584702ba9d3b745906d9ee74", "timestamp" : 1767627094000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:wbca求解失败后，使用ssep路径带来的路径跳变问题\u000a\u000a", "date" : "2026-01-05 23:31:34 +0800", "id" : "020e0a83e2c76c9a584702ba9d3b745906d9ee74", "msg" : "feat:wbca求解失败后，使用ssep路径带来的路径跳变问题", "paths" : [ { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp", "hmi/widget/distance.cpp" ], "commitId" : "76de2323c82763fdcbf6900399338d7b1b57918e", "timestamp" : 1767627107000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:曲率超限停车优化\u000a\u000a", "date" : "2026-01-05 23:31:47 +0800", "id" : "76de2323c82763fdcbf6900399338d7b1b57918e", "msg" : "feat:曲率超限停车优化", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "hmi/widget/distance.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp" ], "commitId" : "5d51162a1acdd29317bf8299acf79949442d35f8", "timestamp" : 1767670282000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:调整曲率超限的滤波参数\u000a\u000a", "date" : "2026-01-06 11:31:22 +0800", "id" : "5d51162a1acdd29317bf8299acf79949442d35f8", "msg" : "fix:调整曲率超限的滤波参数", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp" ], "commitId" : "491e5cdfcf5b781a314a2af34c5d16281c770781", "timestamp" : 1767670305000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:调整曲率超限的滤波参数\u000a\u000a", "date" : "2026-01-06 11:31:45 +0800", "id" : "491e5cdfcf5b781a314a2af34c5d16281c770781", "msg" : "fix:调整曲率超限的滤波参数", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp" ], "commitId" : "565ab8b5d3779b6f0ebbb412cbb3d25c6d314237", "timestamp" : 1767679988000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:曲率超限停车的bug\u000a\u000a", "date" : "2026-01-06 14:13:08 +0800", "id" : "565ab8b5d3779b6f0ebbb412cbb3d25c6d314237", "msg" : "fix:曲率超限停车的bug", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp" ], "commitId" : "6515c57d59de9c9707105252942d22ed57da8796", "timestamp" : 1767680017000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:曲率超限停车的bug\u000a\u000a", "date" : "2026-01-06 14:13:37 +0800", "id" : "6515c57d59de9c9707105252942d22ed57da8796", "msg" : "fix:曲率超限停车的bug", "paths" : [ { "editType" : "edit", "file" : "data/constrain/block_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp", "algorithm/wbca/path_optimization/path_optimization.hpp" ], "commitId" : "3ec02093369f59536c96444dc56f85a199a177c3", "timestamp" : 1767681213000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: add CalcKappaCostSigmoid.\u000a\u000a", "date" : "2026-01-06 14:33:33 +0800", "id" : "3ec02093369f59536c96444dc56f85a199a177c3", "msg" : "feat: add CalcKappaCostSigmoid.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc", "ssep/data_structures/map_element_polyline.cc", "ssep/offboard/ssep_planner_wrapper.cc", "ssep/scenarios/tractor_trailer_enter_parking_spot_planner.h" ], "commitId" : "2ca8c001689f3a35984187de05139b029c6d403a", "timestamp" : 1767688683000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 集卡进停车位时时候更严格的挂车角度\u000a\u000a", "date" : "2026-01-06 16:38:03 +0800", "id" : "2ca8c001689f3a35984187de05139b029c6d403a", "msg" : "fix: SSEP: 集卡进停车位时时候更严格的挂车角度", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/transform_to_body_frame_cli.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/map_element_polyline.cc" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_fsm.cpp" ], "commitId" : "f2290108ddf908793c546086114606cf3e5a07b3", "timestamp" : 1767690093000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:travel out 没有一次规划，状态机切换的bug\u000a\u000a", "date" : "2026-01-06 17:01:33 +0800", "id" : "f2290108ddf908793c546086114606cf3e5a07b3", "msg" : "fix:travel out 没有一次规划，状态机切换的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp", "data/other/flow_control.cpp", "data/app/fsm/task_fsm/task_fsm.cpp", "data/ssep/forward_ec.cpp", "data/plan/guide_line.cpp", "tasks/other_tasks/create_reference_line.cpp" ], "commitId" : "380a90acdb674c672070c41c2a087bc073a91bf5", "timestamp" : 1767690704000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:travel out 没有一次规划的适配\u000a\u000a", "date" : "2026-01-06 17:11:44 +0800", "id" : "380a90acdb674c672070c41c2a087bc073a91bf5", "msg" : "feat:travel out 没有一次规划的适配", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/create_reference_line.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_fsm.cpp" ], "commitId" : "f1f39985c7264f69556adc16422a74a2ace4819d", "timestamp" : 1767690714000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:travel out 没有一次规划，状态机切换的bug\u000a\u000a", "date" : "2026-01-06 17:11:54 +0800", "id" : "f1f39985c7264f69556adc16422a74a2ace4819d", "msg" : "fix:travel out 没有一次规划，状态机切换的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/scenarios/truck_general_planner.h" ], "commitId" : "e8a521b796411bce06e7845a12f3d25ba4131d12", "timestamp" : 1767692822000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修正Rigid truck general builder搜索参数，确保搜索器能具有搜出最大曲率路径的能力。\u000a\u000a", "date" : "2026-01-06 17:47:02 +0800", "id" : "e8a521b796411bce06e7845a12f3d25ba4131d12", "msg" : "fix: SSEP: 修正Rigid truck general builder搜索参数，确保搜索器能具有搜出最大曲率路径的能力。", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/lat_decider/path_bounds_decider.cpp", "data/map/reference/center_line.cpp", "data/plan/switch_data.cpp", "data/plan/guide_line_base.cpp" ], "commitId" : "c58bac22add22aa38736d83891440c3b7512e214", "timestamp" : 1767701967000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:万道内pjpo路径跳变以及变道的bug修复\u000a\u000a", "date" : "2026-01-06 20:19:27 +0800", "id" : "c58bac22add22aa38736d83891440c3b7512e214", "msg" : "feat:万道内pjpo路径跳变以及变道的bug修复", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" }, { "editType" : "edit", "file" : "data/map/reference/center_line.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/lat_decider/path_bounds_decider.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line_base.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_status.cpp" ], "commitId" : "5b5d630f69b1c95a3930102b2c514dc606c08945", "timestamp" : 1767756143000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using ssep speed_limit for deviation.\u000a\u000a", "date" : "2026-01-07 11:22:23 +0800", "id" : "5b5d630f69b1c95a3930102b2c514dc606c08945", "msg" : "fix: using ssep speed_limit for deviation.", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" ], "commitId" : "2a10cc33142c59327c146a1440b4038eade1eb30", "timestamp" : 1767758111000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复优化器中额外前向碰撞距离计算存在误差的问题，解决前港距离前方障碍物太近的问题。\u000a\u000a", "date" : "2026-01-07 11:55:11 +0800", "id" : "2a10cc33142c59327c146a1440b4038eade1eb30", "msg" : "fix: SSEP: 修复优化器中额外前向碰撞距离计算存在误差的问题，解决前港距离前方障碍物太近的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "CMakeLists.txt", ".gitignore" ], "commitId" : "c3ca0ecec2f21836d8a82b98fbd515172f0ad9f8", "timestamp" : 1767759388000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:解决合并代码需要重新编译的问题\u000a\u000a", "date" : "2026-01-07 12:16:28 +0800", "id" : "c3ca0ecec2f21836d8a82b98fbd515172f0ad9f8", "msg" : "fix:解决合并代码需要重新编译的问题", "paths" : [ { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "CMakeLists.txt", ".gitignore" ], "commitId" : "86232c3bad191b66a196af34c219074e20e141fc", "timestamp" : 1767761263000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix:解决合并代码需要重新编译的问题\u000a\u000a", "date" : "2026-01-07 12:47:43 +0800", "id" : "86232c3bad191b66a196af34c219074e20e141fc", "msg" : "fix:解决合并代码需要重新编译的问题", "paths" : [ { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_fuzzy_reversing_planner.h" ], "commitId" : "660eedd899aaee86c94f019dcbad3cbcc78cc860", "timestamp" : 1767764206000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复前杠倒车进料堆优化失败的问题。\u000a\u000a", "date" : "2026-01-07 13:36:46 +0800", "id" : "660eedd899aaee86c94f019dcbad3cbcc78cc860", "msg" : "fix: SSEP: 修复前杠倒车进料堆优化失败的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/plan/path_direction_data.cpp", "tasks/other_tasks/stitch_path_data_to_path.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "e31d4506fcf83a014b2a55451d1e47c8e78241e5", "timestamp" : 1767770836000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复拼接的bug\u000a\u000a", "date" : "2026-01-07 15:27:16 +0800", "id" : "e31d4506fcf83a014b2a55451d1e47c8e78241e5", "msg" : "fix:修复拼接的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" }, { "editType" : "edit", "file" : "data/plan/path_direction_data.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "tasks/other_tasks/stitch_path_data_to_path.cpp", "data/boundary/road_boundary.cpp", "data/plan/path_direction_data.cpp" ], "commitId" : "238e46cb1d29effee165726bafd5180b0ba8d0ed", "timestamp" : 1767770969000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix:修复拼接的bug\u000a\u000a", "date" : "2026-01-07 15:29:29 +0800", "id" : "238e46cb1d29effee165726bafd5180b0ba8d0ed", "msg" : "fix:修复拼接的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/plan/path_direction_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp", "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "ce1f133cbc198256362e293b470d0155c9c6ee9d", "timestamp" : 1767771607000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca reversing bug.\u000a\u000a", "date" : "2026-01-07 15:40:07 +0800", "id" : "ce1f133cbc198256362e293b470d0155c9c6ee9d", "msg" : "fix: wbca reversing bug.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_safe_const.cpp" ], "commitId" : "bee8010e840a688c0151b8eced3e32d26505f915", "timestamp" : 1767772182000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor调整切换lock的阈值\u000a\u000a", "date" : "2026-01-07 15:49:42 +0800", "id" : "bee8010e840a688c0151b8eced3e32d26505f915", "msg" : "refactor调整切换lock的阈值", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/ego_expanding.cpp", "hmi/draw/draw_constrain.cpp" ], "commitId" : "51f4f51b3c5fe810b8039a8c390f7d1005b6febf", "timestamp" : 1767772743000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:锁站场景不膨胀尺寸\u000a\u000a", "date" : "2026-01-07 15:59:03 +0800", "id" : "51f4f51b3c5fe810b8039a8c390f7d1005b6febf", "msg" : "feat:锁站场景不膨胀尺寸", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/ego_expanding.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_constrain.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_safe_const.cpp" ], "commitId" : "624bf556a93cf138bb8a5c9f349a4f6eb19131a5", "timestamp" : 1767772796000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor调整切换lock的阈值\u000a\u000a", "date" : "2026-01-07 15:59:56 +0800", "id" : "624bf556a93cf138bb8a5c9f349a4f6eb19131a5", "msg" : "refactor调整切换lock的阈值", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/ego_expanding.cpp", "hmi/draw/draw_constrain.cpp" ], "commitId" : "6a70b86fc6f3acbe2006fdde64d0c3762a4c10d8", "timestamp" : 1767772801000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:锁站场景不膨胀尺寸\u000a\u000a", "date" : "2026-01-07 16:00:01 +0800", "id" : "6a70b86fc6f3acbe2006fdde64d0c3762a4c10d8", "msg" : "feat:锁站场景不膨胀尺寸", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/ego_expanding.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_constrain.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "65c2a4dae1673308a37a3eb889f1fd6ddb95fe89", "timestamp" : 1767773145000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:代码合并的bug\u000a\u000a", "date" : "2026-01-07 16:05:45 +0800", "id" : "65c2a4dae1673308a37a3eb889f1fd6ddb95fe89", "msg" : "fix:代码合并的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/occupancy_grid_map/data_render.cpp", "data/config/cfg_lat_plan.cpp", "sink/ros_sink_plan_debug.cpp" ], "commitId" : "a84d66ec49368c268e2f31310f8970a01041447e", "timestamp" : 1767777067000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: minimize esdf_map\u000a\u000a", "date" : "2026-01-07 17:11:07 +0800", "id" : "a84d66ec49368c268e2f31310f8970a01041447e", "msg" : "fix: minimize esdf_map", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/occupancy_grid_map/data_render.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_plan_debug.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "0d50bb7d411c0e5be060789f82719196031e378e", "timestamp" : 1767801362000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复崩溃的bug\u000a\u000a", "date" : "2026-01-07 23:56:02 +0800", "id" : "0d50bb7d411c0e5be060789f82719196031e378e", "msg" : "fix:修复崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "0780e0351e0a19eaf0f567247d6223db032e5f04", "timestamp" : 1767801484000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复崩溃的bug\u000a\u000a", "date" : "2026-01-07 23:58:04 +0800", "id" : "0780e0351e0a19eaf0f567247d6223db032e5f04", "msg" : "fix:修复崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "4cf096ac8adc8aa7a90088714dae8da4c1875f46", "timestamp" : 1767838126000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: dx_norm = path_1_tmp.norm\u000a\u000a", "date" : "2026-01-08 10:08:46 +0800", "id" : "4cf096ac8adc8aa7a90088714dae8da4c1875f46", "msg" : "fix: dx_norm = path_1_tmp.norm", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/wbca/wbca_data.cpp", "algorithm/wbca/path_optimization/imv_path_optimization.hpp", "algorithm/wbca/path_optimization/truck_path_optimization.hpp", "algorithm/wbca/wbca_manager.hpp", "algorithm/wbca/path_optimization/imv_path_optimization.cpp", "algorithm/wbca/path_optimization/path_optimization.hpp", "algorithm/wbca/path_optimization/path_optimization.cpp", "data/wbca/wbca_data.hpp", "algorithm/wbca/path_optimization/truck_path_optimization.cpp" ], "commitId" : "3e4dc285c3f92a8bf37472dbb8966c9b22656d05", "timestamp" : 1767847165000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: merge wbca_v2. using soft_min collision cost for truck.\u000a\u000a", "date" : "2026-01-08 12:39:25 +0800", "id" : "3e4dc285c3f92a8bf37472dbb8966c9b22656d05", "msg" : "fix: merge wbca_v2. using soft_min collision cost for truck.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/truck_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.hpp" }, { "editType" : "edit", "file" : "data/wbca/wbca_data.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/imv_path_optimization.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/imv_path_optimization.hpp" }, { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/truck_path_optimization.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/ssep_input_provider.cc", "ssep/coarse_search/evaluator/evaluator.h", "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h", "ssep/coarse_search/evaluator/cost_feature_computer.h", "ssep/coarse_search/evaluator/collision_constraint_type.h", "ssep/coarse_search/evaluator/collision_cost_computer.h" ], "commitId" : "4d2867fdbeaef8b50be33bd358b2b171d49686b3", "timestamp" : 1767865706000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 集卡进堆场搜索的碰撞检测使用软约束。保证生成一条碰撞程度最低的路径。\u000a\u000a", "date" : "2026-01-08 17:48:26 +0800", "id" : "4d2867fdbeaef8b50be33bd358b2b171d49686b3", "msg" : "feat: SSEP: 集卡进堆场搜索的碰撞检测使用软约束。保证生成一条碰撞程度最低的路径。", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/ssep_input_provider.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/collision_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/cost_feature_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/collision_constraint_type.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/lat_decider/path_bounds_decider.cpp", "hmi/draw/draw_ego.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "09e9a02563d1847ca03a767e851cec4af0dc1dfc", "timestamp" : 1767882828000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:进堆场边界优化\u000a\u000a", "date" : "2026-01-08 22:33:48 +0800", "id" : "09e9a02563d1847ca03a767e851cec4af0dc1dfc", "msg" : "feat:进堆场边界优化", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/lat_decider/path_bounds_decider.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_ego.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/evaluator.h" ], "commitId" : "f4bb4ade11c45fccb04b6d9c7530892d4b0e870d", "timestamp" : 1767882846000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:ssep搜索失败的bug\u000a\u000a", "date" : "2026-01-08 22:34:06 +0800", "id" : "f4bb4ade11c45fccb04b6d9c7530892d4b0e870d", "msg" : "fix:ssep搜索失败的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/evaluator.h", "ssep/offboard/ssep_planner_wrapper.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/scenarios/scenario_planner_factory.h", "ssep/data_structures/ssep_input.cc", "ssep/protos/scene.proto", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/ssep_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/imv_enter_yard_planner.h", "ssep/data_structures/operation_mode.hpp", "ssep/data_structures/ssep_input.hpp", "ssep/ssep_planner.cc", "ssep/scenarios/imv_pullover_planner.h", "data/ssep/ssep_activation.cpp", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "data/ssep/ssep_ec.cpp" ], "commitId" : "f53030a5ae83cab7ae5cbedbf88eaa8ca2b42d2b", "timestamp" : 1767947653000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: SSEP输入中加入\"作业模式\"参数（正向作业/反向作业/Undetermined），统一IMV路径搜索流程\u000a\u000a", "date" : "2026-01-09 16:34:13 +0800", "id" : "f53030a5ae83cab7ae5cbedbf88eaa8ca2b42d2b", "msg" : "feat: SSEP: SSEP输入中加入\"作业模式\"参数（正向作业/反向作业/Undetermined），统一IMV路径搜索流程", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/protos/scene.proto" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "add", "file" : "ssep/data_structures/operation_mode.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.hpp" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/wbca/grid_map/esdf_map.cpp", "data/wbca/grid_map/esdf_map.hpp" ], "commitId" : "92cd7fbed1c667aee820c6e4e6a4d3b49ad8316d", "timestamp" : 1768206617000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca ignores ref_pts out of range.\u000a\u000a", "date" : "2026-01-12 16:30:17 +0800", "id" : "92cd7fbed1c667aee820c6e4e6a4d3b49ad8316d", "msg" : "fix: wbca ignores ref_pts out of range.", "paths" : [ { "editType" : "edit", "file" : "data/wbca/grid_map/esdf_map.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/wbca/grid_map/esdf_map.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp" ], "commitId" : "59c45b01c93c3aa14c3a77ce4be98d22cc677f9c", "timestamp" : 1768207439000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复出停车位ssep路径方向的bug\u000a\u000a", "date" : "2026-01-12 16:43:59 +0800", "id" : "59c45b01c93c3aa14c3a77ce4be98d22cc677f9c", "msg" : "fix:修复出停车位ssep路径方向的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "1c08eaaf11f7e6a1bb74e2d9779177a77c0056f6", "timestamp" : 1768207528000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:sweep路径的bug\u000a\u000a", "date" : "2026-01-12 16:45:28 +0800", "id" : "1c08eaaf11f7e6a1bb74e2d9779177a77c0056f6", "msg" : "fix:sweep路径的bug", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/obstacle/obstacle_decider_attr.cpp" ], "commitId" : "015fdd4ab92b0b367f523791922646df7fdb155d", "timestamp" : 1768207577000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:界面添加障碍物类别的显示\u000a\u000a", "date" : "2026-01-12 16:46:17 +0800", "id" : "015fdd4ab92b0b367f523791922646df7fdb155d", "msg" : "feat:界面添加障碍物类别的显示", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/obstacle_decider_attr.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/cloud_pnc_config.cpp", "data/scenario/scenario_planner_condition.cpp" ], "commitId" : "9dccc2d83f43c187d39389d5df20bb529703ee5a", "timestamp" : 1768207712000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化云端障碍物的赋值\u000a\u000a", "date" : "2026-01-12 16:48:32 +0800", "id" : "9dccc2d83f43c187d39389d5df20bb529703ee5a", "msg" : "feat:优化云端障碍物的赋值", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/cloud_pnc_config.cpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_planner_condition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc", "ssep/keb_optimizer/cost_features/state_constraint.h", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h" ], "commitId" : "f546b267e4e9660516d4ed47f2a1bda76afa52c9", "timestamp" : 1768208831000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 提升集卡常规场景的规划的成功率，缓解末端路径画龙的问题\u000a\u000a", "date" : "2026-01-12 17:07:11 +0800", "id" : "f546b267e4e9660516d4ed47f2a1bda76afa52c9", "msg" : "chore: SSEP: 提升集卡常规场景的规划的成功率，缓解末端路径画龙的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/state_constraint.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc" ], "commitId" : "1767b681baa5a6e2f9e0eb8960a03adf70f50097", "timestamp" : 1768210114000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: Car模型多段倒车场景，途径点角度增加角度限制\u000a\u000a", "date" : "2026-01-12 17:28:34 +0800", "id" : "1767b681baa5a6e2f9e0eb8960a03adf70f50097", "msg" : "feat: SSEP: Car模型多段倒车场景，途径点角度增加角度限制", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/truck_general_planner.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/scenarios/truck_multi_segment_parking_planner.h" ], "commitId" : "67eca496cd33a1fb02ae55d339b9ccf72b0aafd7", "timestamp" : 1768218745000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: Car车型多段倒车参数调整\u000a\u000a", "date" : "2026-01-12 19:52:25 +0800", "id" : "67eca496cd33a1fb02ae55d339b9ccf72b0aafd7", "msg" : "chore: SSEP: Car车型多段倒车参数调整", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp" ], "commitId" : "cae158b3fb5fff3be9563caaae55148935200e16", "timestamp" : 1768220924000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复出停车位ssep路径方向的bug\u000a\u000a", "date" : "2026-01-12 20:28:44 +0800", "id" : "cae158b3fb5fff3be9563caaae55148935200e16", "msg" : "fix:修复出停车位ssep路径方向的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "fee0a142cee2e9bc58d155f103526654d5ee36c9", "timestamp" : 1768220931000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:sweep路径的bug\u000a\u000a", "date" : "2026-01-12 20:28:51 +0800", "id" : "fee0a142cee2e9bc58d155f103526654d5ee36c9", "msg" : "fix:sweep路径的bug", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/obstacle/obstacle_decider_attr.cpp" ], "commitId" : "5fa2b4b9292d9c8736745bdca98065bebb9ef644", "timestamp" : 1768220938000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:界面添加障碍物类别的显示\u000a\u000a", "date" : "2026-01-12 20:28:58 +0800", "id" : "5fa2b4b9292d9c8736745bdca98065bebb9ef644", "msg" : "feat:界面添加障碍物类别的显示", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/obstacle_decider_attr.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/cloud_pnc_config.cpp", "data/scenario/scenario_planner_condition.cpp" ], "commitId" : "55efcfe69492843785f1cfb463f495e01a9c9cff", "timestamp" : 1768220943000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化云端障碍物的赋值\u000a\u000a", "date" : "2026-01-12 20:29:03 +0800", "id" : "55efcfe69492843785f1cfb463f495e01a9c9cff", "msg" : "feat:优化云端障碍物的赋值", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/cloud_pnc_config.cpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_planner_condition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "0fe33d19af8430c9535e2a0fc53b1923f66e3aa4", "timestamp" : 1768276480000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: 修复威海car bulkout场景进错的问题\u000a\u000a", "date" : "2026-01-13 11:54:40 +0800", "id" : "0fe33d19af8430c9535e2a0fc53b1923f66e3aa4", "msg" : "fix: 修复威海car bulkout场景进错的问题", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "1ad796cb7325c6f833a94d40ad1420aee052323e", "timestamp" : 1768279417000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: typo\u000a\u000a", "date" : "2026-01-13 12:43:37 +0800", "id" : "1ad796cb7325c6f833a94d40ad1420aee052323e", "msg" : "fix: typo", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/truck_accurate_reversing_planner.cc" ], "commitId" : "febb4db7323ea923978ec02c813302fdffafbb79", "timestamp" : 1768281728000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复最后一段有碰撞时可能优化失败的问题。\u000a\u000a", "date" : "2026-01-13 13:22:08 +0800", "id" : "febb4db7323ea923978ec02c813302fdffafbb79", "msg" : "fix: SSEP: 修复最后一段有碰撞时可能优化失败的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/truck_accurate_reversing_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.hpp", "data/ctrl/lka_start_up.cpp", "data/boundary/road_boundary.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp", "data/plan/guide_line_base.hpp", "data/config/cfg_env_const.cpp", "data/boundary/road_boundary.hpp" ], "commitId" : "2f81e37caa136fb2279265f28c8b604c587b7a94", "timestamp" : 1768292130000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:1.根据堆场的偏移信息确定堆场相对道路的为位置。2.根据堆场位置调整约束\u000a\u000a", "date" : "2026-01-13 16:15:30 +0800", "id" : "2f81e37caa136fb2279265f28c8b604c587b7a94", "msg" : "feat:1.根据堆场的偏移信息确定堆场相对道路的为位置。2.根据堆场位置调整约束", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.hpp" }, { "editType" : "edit", "file" : "data/plan/guide_line_base.hpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/open_space_ec.hpp", "data/ssep/open_space_ec.cpp" ], "commitId" : "53fce25be88b2b4069f31d2bc6e69d90a6ae4bdc", "timestamp" : 1768296144000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:动态搜索考虑不可形式区域\u000a\u000a", "date" : "2026-01-13 17:22:24 +0800", "id" : "53fce25be88b2b4069f31d2bc6e69d90a6ae4bdc", "msg" : "feat:动态搜索考虑不可形式区域", "paths" : [ { "editType" : "edit", "file" : "data/ssep/open_space_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/scene_frame_provider.cc", "ssep/test/CMakeLists.txt", "ssep/common/utils/proto_io.h", "ssep/offboard/ssep_planner_wrapper.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/offboard/scene_replay/replay_scene_frame_cli.cc", "ssep/common/utils/path_utils.cc", "ssep/offboard/ssep_input_provider.cc", "ssep/test/ssep_planner_test.cc", "ssep/CMakeLists.txt", "ssep/offboard/scene_replay/replay_ssep_input_cli.cc", "ssep/common/utils/path_utils.h", "ssep/offboard/ssep_planner_wrapper.h" ], "commitId" : "57a69114a40c051917efbe70873cd118cf8e8d54", "timestamp" : 1768296692000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 完成offline自动回归测试工具。目前支持5种场景的回归测试。其他场景会在后续陆续添加。\u000a\u000a", "date" : "2026-01-13 17:31:32 +0800", "id" : "57a69114a40c051917efbe70873cd118cf8e8d54", "msg" : "feat: SSEP: 完成offline自动回归测试工具。目前支持5种场景的回归测试。其他场景会在后续陆续添加。", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" }, { "editType" : "add", "file" : "ssep/test/ssep_planner_test.cc" }, { "editType" : "edit", "file" : "ssep/offboard/scene_replay/replay_scene_frame_cli.cc" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_input_provider.cc" }, { "editType" : "edit", "file" : "ssep/offboard/scene_replay/replay_ssep_input_cli.cc" }, { "editType" : "add", "file" : "ssep/common/utils/path_utils.cc" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.h" }, { "editType" : "edit", "file" : "ssep/common/utils/proto_io.h" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/scene_frame_provider.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "add", "file" : "ssep/common/utils/path_utils.h" }, { "editType" : "add", "file" : "ssep/test/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/utils/scene_frame_visualization.cc", "ssep/test/ssep_planner_test.cc", "ssep/offboard/servers/scene_vis_html_template.cc" ], "commitId" : "68e5c670dc8f4b8852611d6dfea9745a4bcb4468", "timestamp" : 1768304858000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 可视化增加地图元素显示\u000a\u000a", "date" : "2026-01-13 19:47:38 +0800", "id" : "68e5c670dc8f4b8852611d6dfea9745a4bcb4468", "msg" : "feat: SSEP: 可视化增加地图元素显示", "paths" : [ { "editType" : "edit", "file" : "ssep/common/utils/scene_frame_visualization.cc" }, { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" }, { "editType" : "edit", "file" : "ssep/offboard/servers/scene_vis_html_template.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Control Interfaces.md", ".qoder/repowiki/en/content/Decision System/Path Collision Detection.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\351\\207\\207\\351\\233\\206.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/2D Spline Optimization.md", ".qoder/repowiki/en/content/Testing and Validation/Testing and Validation.md", ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Trajectory Generation.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227.md\"", ".qoder/repowiki/en/content/Developer Guide/Testing and Debugging.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\350\\276\\223\\345\\207\\272.md\"", ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Extended Lane Change Scenario.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\345\\220\\214\\346\\255\\245\\345\\216\\237\\350\\257\\255.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Piecewise Jerk Optimization.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Common UI Elements.md", ".qoder/repowiki/en/content/System Architecture/Planning Architecture.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\345\\235\\207\\345\\200\\274\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266.md\"", ".qoder/repowiki/en/content/Developer Guide/Coding Standards and Practices.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Planner Wrapper and External Integration.md", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Anchor Point Generation.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\345\\212\\250\\345\\212\\233\\345\\255\\246\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/Decision System/Decision Architecture/Module Instantiation and Lifecycle.md", ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Process Module.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\347\\272\\265\\345\\220\\221\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\345\\220\\214\\346\\255\\245.md\"", "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\345\\212\\237\\350\\203\\275\\346\\250\\241\\345\\235\\227.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\345\\233\\233\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"", ".qoder/repowiki/en/content/Planning System/Path Planning/Reference Line Generation.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\350\\267\\257\\345\\276\\204\\350\\276\\271\\347\\225\\214\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/1D Curves.md", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Models.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Configuration Guide/Vehicle Configuration.md", ".qoder/repowiki/en/content/Testing and Validation/Validation Methodologies.md", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/Path Smoothing Algorithms.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Decision System/Lateral Decision.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Perception and Obstacle Visualization.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\267\\257\\345\\276\\204-\\346\\227\\266\\351\\227\\264\\345\\233\\276\\346\\236\\204\\345\\273\\272.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Input_Output Handling.md", "\".qoder/repowiki/zh/content/\\351\\241\\271\\347\\233\\256\\346\\246\\202\\350\\277\\260.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\344\\276\\247\\345\\220\\221\\351\\201\\277\\350\\256\\251\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Task System/Planning Tasks.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\346\\200\\247\\350\\203\\275\\344\\274\\230\\345\\214\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\350\\247\\246\\345\\217\\221\\346\\235\\241\\344\\273\\266.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Visualization Components.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\345\\234\\206\\345\\274\\247\\346\\233\\262\\347\\272\\277.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\246\\350\\276\\206\\347\\212\\266\\346\\200\\201\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\346\\250\\252\\345\\220\\221\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"", ".qoder/repowiki/en/content/Planning System/Obstacle Risk Evaluation.md", ".qoder/repowiki/en/content/Task System/Task Deciders/Lateral Deciders.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Search Engines.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Test Harness and Validation Tools.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\350\\275\\246\\345\\236\\213\\347\\211\\271\\345\\214\\226\\351\\205\\215\\347\\275\\256.md\"", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Normal Junction.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\344\\272\\224\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\351\\253\\230\\347\\272\\247\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"", ".qoder/repowiki/en/content/Error Handling and Diagnostics/Error Handling and Diagnostics.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Planner Core.md", ".qoder/repowiki/zh/meta/repowiki-metadata.json", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\351\\232\\234\\347\\242\\215\\347\\211\\251\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/IMV General Planners.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227.md\"", ".qoder/repowiki/en/content/Task System/Task Deciders/Task Deciders.md", ".qoder/repowiki/en/content/Planning System/Trajectory Generation/PJPO Optimization.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\346\\227\\266\\351\\227\\264-\\347\\251\\272\\351\\227\\264\\345\\233\\276\\345\\206\\263\\347\\255\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Searcher Builders.md", ".qoder/repowiki/en/content/ROS Integration/ROS Integration.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\346\\241\\245\\346\\242\\201\\350\\277\\236\\346\\216\\245\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Path Optimizer.md", ".qoder/repowiki/en/content/Testing and Validation/Simulation Tools.md", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Into-Yard Junction.md", ".qoder/repowiki/en/content/Mathematical Foundations/Interpolation Methods.md", "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\350\\260\\203\\350\\257\\225\\345\\267\\245\\345\\205\\267.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/2D Curves.md", ".qoder/repowiki/en/content/Scenario Management/Scenario Management.md", ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/Trajectory Smoothing.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\344\\270\\212\\344\\270\\213\\346\\226\\207\\347\\256\\241\\347\\220\\206.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Data Structures and Input_Output.md", ".qoder/repowiki/en/content/Mathematical Foundations/Filtering Algorithms.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\345\\256\\271\\345\\231\\250\\344\\270\\216\\346\\223\\215\\344\\275\\234.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Bezier Polynomials.md", ".qoder/repowiki/en/content/Mathematical Foundations/Mathematical Utilities.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/FEM-Based Path Smoothing.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/U-Turn Planners.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Diagnostic Tools.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Vehicle-Specific Optimizers.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266.md\"", "\".qoder/repowiki/zh/content/\\345\\274\\200\\345\\217\\221\\346\\214\\207\\345\\215\\227.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Map Visualization.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\345\\217\\230\\351\\201\\223\\345\\206\\263\\347\\255\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\344\\271\\230\\347\\224\\250\\350\\275\\246\\346\\250\\241\\345\\236\\213.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Serialization and Protobuf Definitions.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Motion Primitive Samplers.md", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing.md", ".qoder/repowiki/en/content/Technology Stack & Dependencies.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\347\\256\\241\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\345\\216\\237\\345\\255\\220\\346\\223\\215\\344\\275\\234.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\350\\275\\246\\351\\201\\223\\344\\277\\235\\346\\214\\201\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Developer Guide/Adding New Scenarios.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\345\\272\\217\\345\\210\\227\\345\\214\\226\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Bulk Yard Planners.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\347\\202\\271\\347\\273\\223\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\351\\200\\237\\345\\272\\246\\344\\274\\230\\345\\214\\226.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", ".qoder/repowiki/en/content/System Architecture/System Architecture.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Lattice Planning.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Status Displays.md", "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\347\\225\\214\\351\\235\\242\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/HMI Architecture.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\346\\261\\202\\350\\247\\243\\345\\231\\250\\345\\256\\236\\347\\216\\260.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Data Flow.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\351\\224\\201\\346\\234\\272\\345\\210\\266.md\"", ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Lane Change Scenario.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/1D Spline Optimization.md", ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Curve Mathematics.md", ".qoder/repowiki/en/content/Task System/Task Architecture.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225.md\"", ".qoder/repowiki/en/content/Scenario Management/Scenario Architecture.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Input Handling.md", ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Bulk Loading Scenario.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/SSEP Planning Visualization.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\347\\272\\277\\347\\250\\213\\346\\236\\266\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201.md\"", ".qoder/repowiki/en/content/Data Management/Data Management.md", ".qoder/repowiki/en/content/Planning System/Path Planning/Guide Line Management.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\231\\256\\351\\200\\232\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/ROS Integration/Message Interfaces.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\217\\230\\351\\201\\223\\345\\234\\272\\346\\231\\257.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Topology Analysis.md", ".qoder/repowiki/en/content/Configuration Guide/Configuration Guide.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\350\\264\\235\\345\\241\\236\\345\\260\\224\\346\\233\\262\\347\\272\\277.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Command System.md", ".qoder/repowiki/en/content/Mathematical Foundations/Mathematical Foundations.md", "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242.md\"", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Truck Dynamics Model.md", ".qoder/repowiki/en/content/Decision System/Longitudinal Decision.md", ".qoder/repowiki/en/content/Task System/Task Deciders/Other Deciders.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\220\\214\\346\\255\\245\\346\\234\\272\\345\\210\\266.md\"", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Seaside Junction.md", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Vehicle Dynamics Models.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Path and Trajectory Rendering.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Cost Functions and Constraints.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Scene Generation and Data Processing Utilities.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\275\\246\\350\\276\\206\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/HMI (Human-Machine Interface).md", ".qoder/repowiki/en/content/Planning System/Planning Architecture.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Output Handling.md", "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\274\\200\\345\\217\\221\\345\\267\\245\\345\\205\\267.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Switch Controls.md", ".qoder/repowiki/en/content/Configuration Guide/Scenario Configuration.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\346\\234\\215\\345\\212\\241\\346\\263\\250\\345\\206\\214.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/Smoothing Strategies.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256.md\"", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Out-Yard Junction.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\250\\241\\345\\236\\213.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204.md\"", ".qoder/repowiki/en/content/Planning System/Path Planning/Path Data Handling.md", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Configuration.md", ".qoder/repowiki/en/content/Scenario Management/Lane Follow Scenario.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\347\\272\\246\\346\\235\\237\\345\\206\\263\\347\\255\\226.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\346\\231\\256\\351\\200\\232\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Replayer System.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Coarse Search Algorithms.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Ego Vehicle and State Visualization.md", ".qoder/repowiki/en/meta/repowiki-metadata.json", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\351\\207\\207\\346\\240\\267\\344\\270\\216\\347\\224\\237\\346\\210\\220.md\"", ".qoder/repowiki/en/content/ROS Integration/Sink Components.md", ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/QP Spline Smoothing.md", ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Open Space Scenario.md", "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\217\\230\\351\\201\\223\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Testing and Validation/Testing Framework.md", ".qoder/repowiki/en/content/Developer Guide/Building the System.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\344\\270\\264\\346\\227\\266\\345\\201\\234\\350\\275\\246\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Prepare Module.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\350\\267\\257\\345\\276\\204\\344\\274\\230\\345\\214\\226.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Configuration and Parameter Management.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Search Engine.md", ".qoder/repowiki/en/content/System Architecture/HMI Architecture.md", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\346\\216\\247\\345\\210\\266\\346\\250\\241\\345\\235\\227.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/PlanFrame\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\351\\252\\214\\350\\257\\201\\350\\247\\204\\345\\210\\231.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Visualization Server and Web Interface.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/SSEP Architecture.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\200\\222\\350\\275\\246\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\346\\263\\212\\350\\275\\246\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"", ".qoder/repowiki/en/content/Task System/Task Deciders/Longitudinal Deciders.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\346\\234\\200\\344\\275\\263\\345\\256\\236\\350\\267\\265.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\347\\273\\204\\346\\210\\220\\344\\270\\216\\347\\256\\241\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\346\\250\\241\\345\\235\\227\\345\\210\\235\\345\\247\\213\\345\\214\\226.md\"", ".qoder/repowiki/en/content/Decision System/Risk-Aware Contingency Planning.md", ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Trajectory Combination.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\351\\205\\215\\347\\275\\256\\346\\216\\245\\345\\217\\243\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/Error Handling and Diagnostics/Error System.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\350\\247\\243\\346\\236\\220\\346\\234\\272\\345\\210\\266.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP (Specialized Scenario Execution Planning).md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\345\\225\\206\\347\\224\\250\\350\\275\\246\\346\\250\\241\\345\\236\\213.md\"", "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\220\\257\\345\\212\\250\\345\\267\\245\\345\\205\\267.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\274\\202\\346\\255\\245\\344\\273\\273\\345\\212\\241\\346\\250\\241\\345\\236\\213.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\344\\274\\230\\345\\214\\226\\351\\227\\256\\351\\242\\230\\345\\273\\272\\346\\250\\241.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266.md\"", ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Architecture.md", ".qoder/repowiki/en/content/Developer Guide/Developer Guide.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Collision Detection Visualization.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\234\\260\\345\\233\\276\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\351\\205\\215\\347\\275\\256\\345\\212\\240\\350\\275\\275.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\274\\200\\346\\224\\276\\347\\251\\272\\351\\227\\264\\345\\234\\272\\346\\231\\257.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\345\\207\\240\\344\\275\\225\\345\\217\\202\\346\\225\\260.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\347\\202\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\350\\275\\246\\351\\201\\223\\344\\277\\235\\346\\214\\201\\345\\234\\272\\346\\231\\257.md\"", "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\350\\257\\204\\344\\274\\260\\344\\270\\216\\346\\216\\222\\345\\272\\217.md\"", ".qoder/repowiki/en/content/System Architecture/Decision Architecture.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Scenario-Specific Planners.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\346\\211\\247\\350\\241\\214\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Collision Checking.md", ".qoder/repowiki/en/content/Data Management/Configuration System.md", ".qoder/repowiki/en/content/Scenario Management/Parking Scenarios.md", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Kinematic Bicycle Model.md", ".qoder/repowiki/en/content/Error Handling and Diagnostics/Logging.md", ".qoder/repowiki/en/content/Task System/Other Tasks.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Input Data Model.md", ".qoder/repowiki/en/content/Task System/Task Deciders/Search Deciders.md", ".qoder/repowiki/en/content/ROS Integration/Source Components.md", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/Shrink Method for Computational Efficiency.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\212\\250\\346\\200\\201\\351\\207\\215\\350\\275\\275.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\241\\245\\345\\214\\272\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Map Representations.md", ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Maneuver Scenarios.md", ".qoder/repowiki/en/content/Configuration Guide/System Configuration.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Data Visualization Widgets.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\210\\235\\345\\247\\213\\345\\214\\226\\346\\265\\201\\347\\250\\213.md\"", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\346\\250\\252\\345\\220\\221\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/BasisStartPointSmooth Strategy.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213.md\"", ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Vehicle State Representation.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\345\\206\\263\\347\\255\\226\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/Decision System/Decision System.md", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\263\\212\\350\\275\\246\\345\\234\\272\\346\\231\\257.md\"", ".qoder/repowiki/en/content/Planning System/Planning System.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Multi-Segment Parking Planners.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\216\\245\\345\\217\\243\\350\\247\\204\\350\\214\\203.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\346\\241\\206\\346\\236\\266\\350\\256\\276\\350\\256\\241.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/KEB Optimization Framework.md", ".qoder/repowiki/en/content/Project Overview.md", ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Player Controls.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\344\\270\\255\\345\\200\\274\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\346\\241\\245\\346\\216\\245\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Planning System/Path Planning/Path Planning.md", "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\345\\217\\257\\350\\247\\206\\345\\214\\226\\347\\273\\204\\344\\273\\266.md\"", "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\274\\200\\346\\224\\276\\347\\251\\272\\351\\227\\264\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/IncrementSmooth Strategy.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\351\\200\\232\\344\\277\\241\\345\\215\\217\\350\\256\\256.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Output Data Model.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Offboard Tools and Utilities.md", ".qoder/repowiki/en/content/Task System/Task System.md", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Bridge Junction.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\346\\211\\251\\345\\261\\225\\346\\234\\272\\345\\210\\266.md\"", ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/AllSmooth Strategy.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223.md\"", ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Junction Scenarios.md", "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\346\\225\\260\\346\\215\\256\\345\\270\\247\\350\\256\\276\\350\\256\\241.md\"", "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/HmiFrame\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"", ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Dubins Curves.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\347\\272\\265\\345\\220\\221\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Path Optimization and Refinement.md", "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\351\\224\\231\\350\\257\\257\\345\\244\\204\\347\\220\\206.md\"", ".qoder/repowiki/en/content/Data Management/Data Structures.md", ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Path Evaluation and Scoring.md", "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\344\\270\\211\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"" ], "commitId" : "122508031b8e5752da73c47360865aca40f4699c", "timestamp" : 1768305928000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: add repowiki by qoder\u000a", "date" : "2026-01-13 20:05:28 +0800", "id" : "122508031b8e5752da73c47360865aca40f4699c", "msg" : "feat: add repowiki by qoder", "paths" : [ { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Map Visualization.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Anchor Point Generation.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\347\\272\\265\\345\\220\\221\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\351\\200\\232\\344\\277\\241\\345\\215\\217\\350\\256\\256.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\345\\206\\263\\347\\255\\226\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/Trajectory Smoothing.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/2D Spline Optimization.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\217\\230\\351\\201\\223\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Data Flow.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/ROS Integration/Message Interfaces.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Path Optimizer.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Control Interfaces.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/Path Smoothing Algorithms.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\344\\270\\255\\345\\200\\274\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Kinematic Bicycle Model.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\350\\247\\246\\345\\217\\221\\346\\235\\241\\344\\273\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Command System.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Vehicle Dynamics Models.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Diagnostic Tools.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Developer Guide/Coding Standards and Practices.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Planning System.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Vehicle-Specific Optimizers.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP (Specialized Scenario Execution Planning).md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Input_Output Handling.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/meta/repowiki-metadata.json" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/ROS Integration/Sink Components.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Technology Stack & Dependencies.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\351\\224\\201\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Planning/Path Planning.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Path Optimization and Refinement.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\345\\256\\271\\345\\231\\250\\344\\270\\216\\346\\223\\215\\344\\275\\234.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/System Architecture/System Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\346\\216\\247\\345\\210\\266\\346\\250\\241\\345\\235\\227.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\344\\276\\247\\345\\220\\221\\351\\201\\277\\350\\256\\251\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Data Structures and Input_Output.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Collision Detection Visualization.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\346\\263\\212\\350\\275\\246\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/HMI (Human-Machine Interface).md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Offboard Tools and Utilities.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\347\\272\\277\\347\\250\\213\\346\\236\\266\\346\\236\\204.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/IMV General Planners.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Junction Scenarios.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\344\\270\\212\\344\\270\\213\\346\\226\\207\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Multi-Segment Parking Planners.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Data Management/Configuration System.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\217\\230\\351\\201\\223\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Scenario Management.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\346\\241\\245\\346\\242\\201\\350\\277\\236\\346\\216\\245\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Visualization Components.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\344\\274\\230\\345\\214\\226\\351\\227\\256\\351\\242\\230\\345\\273\\272\\346\\250\\241.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Developer Guide/Building the System.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\344\\272\\224\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Out-Yard Junction.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task System.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Normal Junction.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Lateral Decision.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/IncrementSmooth Strategy.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/System Architecture/HMI Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\344\\271\\230\\347\\224\\250\\350\\275\\246\\346\\250\\241\\345\\236\\213.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\346\\227\\266\\351\\227\\264-\\347\\251\\272\\351\\227\\264\\345\\233\\276\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\344\\270\\211\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\274\\202\\346\\255\\245\\344\\273\\273\\345\\212\\241\\346\\250\\241\\345\\236\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision System.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\347\\272\\265\\345\\220\\221\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Planning Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\220\\257\\345\\212\\250\\345\\267\\245\\345\\205\\267.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\234\\260\\345\\233\\276\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Developer Guide/Adding New Scenarios.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Ego Vehicle and State Visualization.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\220\\214\\346\\255\\245\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/AllSmooth Strategy.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260/\\350\\275\\246\\351\\201\\223\\344\\277\\235\\346\\214\\201\\345\\234\\272\\346\\231\\257\\351\\230\\266\\346\\256\\265\\345\\256\\236\\347\\216\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Topology Analysis.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\274\\200\\345\\217\\221\\346\\214\\207\\345\\215\\227.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/System Architecture/Decision Architecture.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\351\\252\\214\\350\\257\\201\\350\\247\\204\\345\\210\\231.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\351\\205\\215\\347\\275\\256\\345\\212\\240\\350\\275\\275.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Scene Generation and Data Processing Utilities.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/PlanFrame\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Input Data Model.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/Cost Functions and Constraints.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\250\\241\\345\\236\\213.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\274\\200\\345\\217\\221\\345\\267\\245\\345\\205\\267.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\216\\245\\345\\217\\243\\350\\247\\204\\350\\214\\203.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Lane Follow Scenario.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\346\\241\\206\\346\\236\\266\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\246\\350\\276\\206\\347\\212\\266\\346\\200\\201\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\346\\234\\215\\345\\212\\241\\346\\263\\250\\345\\206\\214.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Open Space Scenario.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Obstacle Risk Evaluation.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/SSEP Architecture.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Vehicle State Representation.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Deciders/Other Deciders.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\347\\273\\204\\346\\210\\220\\344\\270\\216\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\200\\222\\350\\275\\246\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\350\\267\\257\\345\\276\\204\\350\\276\\271\\347\\225\\214\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/Shrink Method for Computational Efficiency.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\347\\225\\214\\351\\235\\242\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\346\\234\\200\\344\\275\\263\\345\\256\\236\\350\\267\\265.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\274\\200\\346\\224\\276\\347\\251\\272\\351\\227\\264\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Bulk Yard Planners.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\345\\207\\240\\344\\275\\225\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\345\\217\\257\\350\\247\\206\\345\\214\\226\\347\\273\\204\\344\\273\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Deciders/Search Deciders.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\351\\205\\215\\347\\275\\256\\346\\216\\245\\345\\217\\243\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Lattice Planning.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Output Handling.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\274\\200\\346\\224\\276\\347\\251\\272\\351\\227\\264\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\345\\234\\206\\345\\274\\247\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\350\\257\\204\\344\\274\\260\\344\\270\\216\\346\\216\\222\\345\\272\\217.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Data Management/Data Management.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Test Harness and Validation Tools.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Error Handling and Diagnostics/Error System.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\350\\276\\223\\345\\207\\272.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\275\\250\\350\\277\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\275\\250\\350\\277\\271\\347\\202\\271\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\346\\225\\260\\346\\215\\256\\345\\270\\247\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Testing and Validation/Testing Framework.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Input_Output Handling/Input Handling.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\345\\216\\237\\345\\255\\220\\346\\223\\215\\344\\275\\234.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\350\\275\\246\\345\\236\\213\\347\\211\\271\\345\\214\\226\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Dubins Curves.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Interpolation Methods.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Error Handling and Diagnostics/Logging.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Configuration Guide/Vehicle Configuration.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Project Overview.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\231\\256\\351\\200\\232\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Seaside Junction.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\351\\207\\207\\351\\233\\206.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\350\\247\\243\\346\\236\\220\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\346\\231\\256\\351\\200\\232\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/\\350\\267\\257\\345\\276\\204\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204/\\350\\267\\257\\345\\276\\204\\347\\202\\271\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\351\\232\\234\\347\\242\\215\\347\\211\\251\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Prepare Module.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Lane Change Scenario.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Map Representations.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Maneuver Scenarios.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Process Module.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Testing and Validation/Validation Methodologies.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\345\\220\\214\\346\\255\\245\\345\\216\\237\\350\\257\\255.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Planning Tasks.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\350\\267\\257\\345\\276\\204\\344\\274\\230\\345\\214\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\345\\237\\272\\347\\241\\200\\346\\273\\244\\346\\263\\242\\345\\231\\250/\\345\\235\\207\\345\\200\\274\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Collision Checking.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Mathematical Foundations.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Trajectory Generation.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204\\350\\256\\276\\350\\256\\241/HmiFrame\\346\\225\\260\\346\\215\\256\\347\\273\\223\\346\\236\\204.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\347\\272\\246\\346\\235\\237\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Deciders/Task Deciders.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Deciders/Lateral Deciders.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Bridge Junction.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Perception and Obstacle Visualization.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/ROS Integration/ROS Integration.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Switch Controls.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Visualization Server and Web Interface.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Parking Scenarios.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\350\\275\\246\\351\\201\\223\\344\\277\\235\\346\\214\\201\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\344\\270\\264\\346\\227\\266\\345\\201\\234\\350\\275\\246\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Testing and Validation/Testing and Validation.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\350\\247\\204\\345\\210\\222\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision Architecture/Decision Architecture.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Other Tasks.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266/\\350\\260\\203\\345\\272\\246\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\347\\272\\277\\347\\250\\213\\345\\256\\211\\345\\205\\250\\346\\234\\272\\345\\210\\266/\\346\\200\\247\\350\\203\\275\\344\\274\\230\\345\\214\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/1D Curves.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Testing and Validation/Simulation Tools.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Common UI Elements.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Configuration Guide/Configuration Guide.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Extended Lane Change Scenario.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Data Visualization Widgets.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Scenario Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\346\\266\\210\\346\\201\\257\\346\\234\\272\\345\\210\\266/\\345\\272\\217\\345\\210\\227\\345\\214\\226\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/QP Spline Smoothing.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Data Management/Data Structures.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Junction Scenarios/Into-Yard Junction.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Serialization and Protobuf Definitions.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Bezier Polynomials.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Risk-Aware Contingency Planning.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Trajectory Generation/PJPO Optimization.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/2D Curves.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\210\\235\\345\\247\\213\\345\\214\\226\\346\\265\\201\\347\\250\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Planning/Guide Line Management.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\263\\212\\350\\275\\246\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\250\\241\\345\\235\\227\\351\\200\\232\\344\\277\\241\\346\\234\\272\\345\\210\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266/\\345\\274\\202\\346\\255\\245\\346\\241\\206\\346\\236\\266.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\347\\272\\265\\345\\220\\221\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\275\\250\\350\\277\\271\\351\\207\\207\\346\\240\\267\\344\\270\\216\\347\\224\\237\\346\\210\\220.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\267\\245\\345\\205\\267\\345\\222\\214\\350\\204\\232\\346\\234\\254/\\350\\260\\203\\350\\257\\225\\345\\267\\245\\345\\205\\267.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Searcher Builders.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Configuration Guide/System Configuration.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Path Optimization and Refinement/KEB Optimization Framework.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Offboard Tools and Utilities/Planner Wrapper and External Integration.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\346\\234\\272.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Decision Architecture/Module Instantiation and Lifecycle.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Path Collision Detection.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Planning/Path Data Handling.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\275\\246\\350\\276\\206\\351\\205\\215\\347\\275\\256/\\345\\212\\250\\345\\212\\233\\345\\255\\246\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Planner Core.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Player Controls.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/Smoothing Strategies.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Replayer System.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Configuration.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\347\\233\\221\\347\\235\\243\\345\\231\\250\\346\\236\\266\\346\\236\\204/\\347\\212\\266\\346\\200\\201\\346\\234\\272\\350\\256\\276\\350\\256\\241.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\351\\200\\237\\345\\272\\246\\344\\274\\230\\345\\214\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/SSEP Architecture/Planner Core/Search Engine.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Coarse Search Algorithms.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Data Structures and Input_Output/Output Data Model.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256/\\346\\250\\252\\345\\220\\221\\350\\247\\204\\345\\210\\222\\351\\205\\215\\347\\275\\256.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/HMI Architecture.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\275\\246\\350\\276\\206\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\346\\211\\247\\350\\241\\214\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Trajectory Smoothing/FEM-Based Path Smoothing.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\217\\202\\346\\225\\260\\350\\257\\264\\346\\230\\216/\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260/\\346\\250\\252\\345\\220\\221\\350\\247\\204\\345\\210\\222\\345\\217\\202\\346\\225\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\273\\244\\346\\263\\242\\347\\256\\227\\346\\263\\225/\\351\\253\\230\\347\\272\\247\\346\\273\\244\\346\\263\\242\\345\\231\\250.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\345\\206\\263\\347\\255\\226\\346\\250\\241\\345\\235\\227/\\346\\250\\252\\345\\220\\221\\345\\206\\263\\347\\255\\226/\\345\\217\\230\\351\\201\\223\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Filtering Algorithms.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/U-Turn Planners.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/System Architecture/Planning Architecture.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Dynamics Models/Truck Dynamics Model.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Piecewise Jerk Optimization.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\350\\275\\246\\350\\276\\206\\346\\250\\241\\345\\236\\213\\347\\256\\227\\346\\263\\225/\\345\\225\\206\\347\\224\\250\\350\\275\\246\\346\\250\\241\\345\\236\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Planning/Reference Line Generation.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Decision System/Longitudinal Decision.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Task System/Task Deciders/Longitudinal Deciders.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Configuration Guide/Scenario Configuration.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Error Handling and Diagnostics/Error Handling and Diagnostics.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\351\\224\\231\\350\\257\\257\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Motion Primitive Samplers.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\346\\261\\202\\350\\247\\243\\345\\231\\250\\345\\256\\236\\347\\216\\260.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\344\\272\\272\\346\\234\\272\\344\\272\\244\\344\\272\\222\\347\\225\\214\\351\\235\\242/\\345\\212\\237\\350\\203\\275\\346\\250\\241\\345\\235\\227.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Search Engines.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Scenario Management/Maneuver Scenarios/Bulk Loading Scenario.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\346\\265\\201\\346\\236\\266\\346\\236\\204/\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206/\\345\\206\\263\\347\\255\\226\\346\\225\\260\\346\\215\\256\\345\\244\\204\\347\\220\\206.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\345\\210\\207\\346\\215\\242\\346\\234\\272\\345\\210\\266/\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226\\346\\265\\201\\347\\250\\213/\\346\\241\\245\\346\\216\\245\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257\\345\\206\\263\\347\\255\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\212\\240\\350\\275\\275\\346\\265\\201\\347\\250\\213/\\345\\212\\250\\346\\200\\201\\351\\207\\215\\350\\275\\275.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\345\\234\\272\\346\\231\\257\\347\\256\\241\\347\\220\\206/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213/\\346\\241\\245\\345\\214\\272\\350\\267\\257\\345\\217\\243\\345\\234\\272\\346\\231\\257.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\241\\271\\347\\233\\256\\346\\246\\202\\350\\277\\260.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Configuration and Parameter Management.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225/\\344\\274\\230\\345\\214\\226\\347\\256\\227\\346\\263\\225.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\347\\212\\266\\346\\200\\201\\347\\256\\241\\347\\220\\206/\\347\\212\\266\\346\\200\\201\\345\\220\\214\\346\\255\\245.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/Path and Trajectory Rendering.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\207\\240\\344\\275\\225\\346\\233\\262\\347\\272\\277/\\350\\264\\235\\345\\241\\236\\345\\260\\224\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226/\\350\\275\\250\\350\\277\\271\\344\\274\\230\\345\\214\\226.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Vehicle Models/Vehicle Models.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\240\\270\\345\\277\\203\\346\\250\\241\\345\\235\\227\\350\\257\\246\\350\\247\\243/\\350\\247\\204\\345\\210\\222\\346\\250\\241\\345\\235\\227/\\350\\275\\250\\350\\277\\271\\347\\224\\237\\346\\210\\220/\\350\\267\\257\\345\\276\\204-\\346\\227\\266\\351\\227\\264\\345\\233\\276\\346\\236\\204\\345\\273\\272.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Smoothing Strategies/BasisStartPointSmooth Strategy.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\345\\212\\240\\350\\275\\275\\346\\234\\272\\345\\210\\266/\\345\\217\\202\\346\\225\\260\\351\\252\\214\\350\\257\\201/\\346\\211\\251\\345\\261\\225\\346\\234\\272\\345\\210\\266.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Developer Guide/Developer Guide.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Developer Guide/Testing and Debugging.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Control Interfaces/Status Displays.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\351\\205\\215\\347\\275\\256\\347\\256\\241\\347\\220\\206/\\351\\205\\215\\347\\275\\256\\346\\226\\207\\344\\273\\266\\350\\257\\246\\350\\247\\243/\\345\\234\\272\\346\\231\\257\\351\\205\\215\\347\\275\\256/\\345\\234\\272\\346\\231\\257\\347\\261\\273\\345\\236\\213.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/zh/meta/repowiki-metadata.json" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Trajectory Generation/Trajectory Combination.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Scenario-Specific Planners/Scenario-Specific Planners.md" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\347\\263\\273\\347\\273\\237\\346\\236\\266\\346\\236\\204/\\346\\211\\247\\350\\241\\214\\346\\241\\206\\346\\236\\266/\\345\\220\\257\\345\\212\\250\\346\\265\\201\\347\\250\\213/\\346\\250\\241\\345\\235\\227\\345\\210\\235\\345\\247\\213\\345\\214\\226.md\"" }, { "editType" : "add", "file" : "\".qoder/repowiki/zh/content/\\346\\225\\260\\345\\255\\246\\347\\256\\227\\346\\263\\225\\345\\272\\223/\\346\\233\\262\\347\\272\\277\\347\\256\\227\\346\\263\\225/\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277/\\345\\233\\233\\346\\254\\241\\345\\244\\232\\351\\241\\271\\345\\274\\217\\346\\233\\262\\347\\272\\277.md\"" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Planning System/Path Smoothing/Path Smoothing Algorithms/1D Spline Optimization.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/ROS Integration/Source Components.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Mathematical Utilities.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/Mathematical Foundations/Curve Mathematics/Curve Mathematics.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/SSEP (Specialized Scenario Execution Planning)/Coarse Search Algorithms/Path Evaluation and Scoring.md" }, { "editType" : "add", "file" : ".qoder/repowiki/en/content/HMI (Human-Machine Interface)/Visualization Components/SSEP Planning Visualization.md" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "scenarios/lane_follow_scenario/lane_follow_stage.cpp", "hmi/draw/draw_path_boundary.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "69ce5b9b7f598fe8746dd73da02093fb97586351", "timestamp" : 1768313785000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:终点在堆场出口，边界的bug\u000a\u000a", "date" : "2026-01-13 22:16:25 +0800", "id" : "69ce5b9b7f598fe8746dd73da02093fb97586351", "msg" : "fix:终点在堆场出口，边界的bug", "paths" : [ { "editType" : "edit", "file" : "scenarios/lane_follow_scenario/lane_follow_stage.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_path_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/utils/scene_frame_visualization.cc", "ssep/test/ssep_planner_test.cc", ".gitignore" ], "commitId" : "37779680e5ac819b4505714c2ac945f2ca441b41", "timestamp" : 1768359336000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: minor updates\u000a\u000a", "date" : "2026-01-14 10:55:36 +0800", "id" : "37779680e5ac819b4505714c2ac945f2ca441b41", "msg" : "chore: SSEP: minor updates", "paths" : [ { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "ssep/common/utils/scene_frame_visualization.cc" }, { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.hpp", "data/config/cfg_lat_plan.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "ca1f3b58fdd492fc72510a52dd82cc24925cf553", "timestamp" : 1768365138000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: no_shift region around destination.\u000a", "date" : "2026-01-14 12:32:18 +0800", "id" : "ca1f3b58fdd492fc72510a52dd82cc24925cf553", "msg" : "fix: no_shift region around destination.", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_ads_hfsm_state.cpp" ], "commitId" : "73dab7e618cce031f74f2c2f2d825e1759d1690f", "timestamp" : 1768365516000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整 hfsm status中cur lane id的逻辑\u000a\u000a", "date" : "2026-01-14 12:38:36 +0800", "id" : "73dab7e618cce031f74f2c2f2d825e1759d1690f", "msg" : "feat:调整 hfsm status中cur lane id的逻辑", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_ads_hfsm_state.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_status.cpp" ], "commitId" : "16212bcd753e077eb20fb2cd7ab9bceccbfdd50b", "timestamp" : 1768369599000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: deviation speed limit bug.\u000a\u000a", "date" : "2026-01-14 13:46:39 +0800", "id" : "16212bcd753e077eb20fb2cd7ab9bceccbfdd50b", "msg" : "fix: deviation speed limit bug.", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/maps/sl_projection_map.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/coarse_search/preprocessed_curves/tt_curve_manager.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/keb_optimizer/keb_problem.cc", "ssep/coarse_search/preprocessed_curves/trajectories_reader.cc", "ssep/test/ssep_planner_test.cc", "ssep/scenarios/imv_general_planner.h", "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/scenarios/imv_pullover_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/maps/sl_projection_map.h" ], "commitId" : "3d977e95e3b2bb6819b4cb271148c7433110c722", "timestamp" : 1768373009000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: IMV - either goal direction 更改为 either start direction，大大简化逻辑，并且全场景支持了IMV作业模式未确定的场景。\u000a\u000a", "date" : "2026-01-14 14:43:29 +0800", "id" : "3d977e95e3b2bb6819b4cb271148c7433110c722", "msg" : "feat: SSEP: IMV - either goal direction 更改为 either start direction，大大简化逻辑，并且全场景支持了IMV作业模式未确定的场景。", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/maps/sl_projection_map.cc" }, { "editType" : "edit", "file" : "ssep/maps/sl_projection_map.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/preprocessed_curves/trajectories_reader.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/preprocessed_curves/tt_curve_manager.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/coarse_search/searcher_builders/imv_bidirectional_searcher_builder.h", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc", "ssep/data_structures/ssep_input.cc", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc", "ssep/scenarios/imv_enter_yard_planner.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/legacy_planner.h", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/offboard/ssep_visualizer.h", "ssep/ssep_planner.h", "ssep/scenarios/truck_general_planner.h", "ssep/coarse_search/evaluator/ref_line_cost_computer.h", "ssep/scenarios/truck_accurate_reversing_planner.cc", "ssep/ssep_planner.cc", "ssep/scenarios/imv_pullover_planner.h", "ssep/offboard/ssep_planner_wrapper.cc", "ssep/coarse_search/legacy_searcher_adaptor.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/imv_enter_station_planner.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/coarse_search/evaluator/ref_line_heuristic_computer.h", "ssep/scenarios/tractor_trailer_enter_parking_spot_planner.h", "ssep/scenarios/truck_multi_segment_parking_planner.h", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/coarse_search/searcher_builders/imv_bidirectional_searcher_builder.cc", "ssep/coarse_search/evaluator/evaluator.h", "ssep/maps/sl_projection_map.cc", "ssep/offboard/generate_scene_data/generate_scene_data_cli.cc", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/scenarios/scenario_planner_factory.h", "ssep/data_structures/search_boundary.h", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.h", "ssep/offboard/main_test/main_test_park.cc", "ssep/offboard/ssep_visualizer.cc", "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h", "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/data_structures/ssep_input.hpp", "ssep/maps/sl_projection_map.h" ], "commitId" : "62b8bbef96257f4cef348be22831f2c4e5cd96b1", "timestamp" : 1768375408000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "Refactor: SSEP: 用aabox替换vector表示search bounds\u000a\u000a", "date" : "2026-01-14 15:23:28 +0800", "id" : "62b8bbef96257f4cef348be22831f2c4e5cd96b1", "msg" : "Refactor: SSEP: 用aabox替换vector表示search bounds", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/ref_line_heuristic_computer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_visualizer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/maps/sl_projection_map.h" }, { "editType" : "edit", "file" : "ssep/maps/sl_projection_map.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/ref_line_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_visualizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/offboard/main_test/main_test_park.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/generate_scene_data_cli.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/search_boundary.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searcher_adaptor.h" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "9c5de2358932fe346127431b3b34c11780b36ea8", "timestamp" : 1768375883000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: truck wbca replayer debug.\u000a\u000a", "date" : "2026-01-14 15:31:23 +0800", "id" : "9c5de2358932fe346127431b3b34c11780b36ea8", "msg" : "fix: truck wbca replayer debug.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "de7a29c1045959bc03c018a2ec95723a1533f3e6", "timestamp" : 1768375925000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: truck wbca replayer debug.\u000a\u000a", "date" : "2026-01-14 15:32:05 +0800", "id" : "de7a29c1045959bc03c018a2ec95723a1533f3e6", "msg" : "fix: truck wbca replayer debug.", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_ads_hfsm_state.cpp" ], "commitId" : "3af3fd40567eb7498ea82f53778673fde97e7d29", "timestamp" : 1768377192000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化cur laneid的赋值\u000a\u000a", "date" : "2026-01-14 15:53:12 +0800", "id" : "3af3fd40567eb7498ea82f53778673fde97e7d29", "msg" : "feat:优化cur laneid的赋值", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_ads_hfsm_state.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.h", "ssep/test/ssep_planner_test.cc", "ssep/coarse_search/state_hasher.h", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" ], "commitId" : "32d915572bd8073abb9138cf8292ea4072f9afab", "timestamp" : 1768379741000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: Improve bidirectional search\u000a\u000a", "date" : "2026-01-14 16:35:41 +0800", "id" : "32d915572bd8073abb9138cf8292ea4072f9afab", "msg" : "chore: SSEP: Improve bidirectional search", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/state_hasher.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/math/aabox2d.cc", "ssep/common/math/aabox2d.h", "data/ssep/ssep_activation.cpp", "data/ssep/ssep_ec.cpp" ], "commitId" : "af737dee0680b4bc1a1a604c8c6551bd24e25ee8", "timestamp" : 1768384178000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: fix compile errors\u000a\u000a", "date" : "2026-01-14 17:49:38 +0800", "id" : "af737dee0680b4bc1a1a604c8c6551bd24e25ee8", "msg" : "fix: fix compile errors", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "ssep/common/math/aabox2d.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/common/math/aabox2d.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "hmi/widget/diagnose.cpp", "algorithm/wbca/imv_wbca_manager.cpp", "data/wbca/wbca_data.hpp", "tasks/plan/path_optimization_task.cpp" ], "commitId" : "a809f8ef4b34a72e66dc57b275fb286bc939c8b4", "timestamp" : 1768445003000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using wbca failed_count to deactivate history.\u000a\u000a", "date" : "2026-01-15 10:43:23 +0800", "id" : "a809f8ef4b34a72e66dc57b275fb286bc939c8b4", "msg" : "fix: using wbca failed_count to deactivate history.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" }, { "editType" : "edit", "file" : "hmi/widget/diagnose.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.cpp" ], "commitId" : "4cdb4fb2cc902a14914585d82c77683745a3a6f7", "timestamp" : 1768448471000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: merge bug.\u000a\u000a", "date" : "2026-01-15 11:41:11 +0800", "id" : "4cdb4fb2cc902a14914585d82c77683745a3a6f7", "msg" : "fix: merge bug.", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "dd1d6087331353ce8f78e51aab64ad25c0eb5ff2", "timestamp" : 1768448761000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:搜索起点太远的问题\u000a\u000a", "date" : "2026-01-15 11:46:01 +0800", "id" : "dd1d6087331353ce8f78e51aab64ad25c0eb5ff2", "msg" : "fix:搜索起点太远的问题", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "26f743ab9bf88bfdc913f2288ab9cb469b78d943", "timestamp" : 1768465367000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 解决集卡常规场景轨迹异常的问题\u000a", "date" : "2026-01-15 16:22:47 +0800", "id" : "26f743ab9bf88bfdc913f2288ab9cb469b78d943", "msg" : "fix: SSEP: 解决集卡常规场景轨迹异常的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_static.cpp" ], "commitId" : "51528e18a048ddfc069cd8d53cdd2de73409ecbb", "timestamp" : 1768465806000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: cfg_static bug\u000a\u000a", "date" : "2026-01-15 16:30:06 +0800", "id" : "51528e18a048ddfc069cd8d53cdd2de73409ecbb", "msg" : "fix: cfg_static bug", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_static.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "0e4e7087f3b5f223891292c1b3a221381c5e3f3e", "timestamp" : 1768465856000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: replayer bug\u000a\u000a", "date" : "2026-01-15 16:30:56 +0800", "id" : "0e4e7087f3b5f223891292c1b3a221381c5e3f3e", "msg" : "fix: replayer bug", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/imv_pullover_planner.h", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/scenarios/imv_exit_parking_spot_planner.h" ], "commitId" : "070dd8b89aec0c95b5d92ae45d4f9bfd2a3b3419", "timestamp" : 1768473813000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复IMV出停车位路径异常的问题\u000a\u000a", "date" : "2026-01-15 18:43:33 +0800", "id" : "070dd8b89aec0c95b5d92ae45d4f9bfd2a3b3419", "msg" : "fix: SSEP: 修复IMV出停车位路径异常的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/imv_enter_station_planner.h" ], "commitId" : "bb337fe93d17188b99fe5938008fff3bfa3738ca", "timestamp" : 1768486589000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:imv进停车位双向搜索的bug\u000a", "date" : "2026-01-15 22:16:29 +0800", "id" : "bb337fe93d17188b99fe5938008fff3bfa3738ca", "msg" : "fix:imv进停车位双向搜索的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_status.cpp" ], "commitId" : "b3f8c44df625b8e97664deaa650bc71ee3a31569", "timestamp" : 1768486660000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:切换到idle保持状态的bug\u000a", "date" : "2026-01-15 22:17:40 +0800", "id" : "b3f8c44df625b8e97664deaa650bc71ee3a31569", "msg" : "fix:切换到idle保持状态的bug", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/ssep/ssep_ec.cpp", "data/ssep/forward_ec.cpp" ], "commitId" : "448a8a054bfcbd28cc1200bfeaf08e433ac1beda", "timestamp" : 1768486808000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:苏溪,西联,董分 双向搜索的bug\u000a", "date" : "2026-01-15 22:20:08 +0800", "id" : "448a8a054bfcbd28cc1200bfeaf08e433ac1beda", "msg" : "feat:苏溪,西联,董分 双向搜索的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "ea31f947164cf7c8059c3588cee812bdb7057ce8", "timestamp" : 1768486927000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:添加gitgnore\u000a", "date" : "2026-01-15 22:22:07 +0800", "id" : "ea31f947164cf7c8059c3588cee812bdb7057ce8", "msg" : "chore:添加gitgnore", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/driving_corridor.cpp", "data/obstacle/ogm.hpp", "plan/prepare/prepare_ogm.cpp" ], "commitId" : "7f5680cb0303cdfc8b0e763111f473b218d798a6", "timestamp" : 1768487042000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:驾驶走廊图构建的bug\u000a", "date" : "2026-01-15 22:24:02 +0800", "id" : "7f5680cb0303cdfc8b0e763111f473b218d798a6", "msg" : "fix:驾驶走廊图构建的bug", "paths" : [ { "editType" : "edit", "file" : "data/boundary/driving_corridor.cpp" }, { "editType" : "edit", "file" : "data/obstacle/ogm.hpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "24650afb3e953652318cc636969af68ea33cf019", "timestamp" : 1768487109000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:删除多余的log\u000a", "date" : "2026-01-15 22:25:09 +0800", "id" : "24650afb3e953652318cc636969af68ea33cf019", "msg" : "chore:删除多余的log", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "math/util/math_utils.cc" ], "commitId" : "3581b0b6b94cdd8bd418da6fc81b5ed917c27182", "timestamp" : 1768487355000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整 float to half\u000a", "date" : "2026-01-15 22:29:15 +0800", "id" : "3581b0b6b94cdd8bd418da6fc81b5ed917c27182", "msg" : "feat:调整 float to half", "paths" : [ { "editType" : "edit", "file" : "math/util/math_utils.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/pnc_map_path.cpp", "data/vehicle/vehicle_status.hpp", "data/map/pnc_map/path_overlap.hpp", "data/plan/guide_line.cpp", "plan/prepare/prepare_status.cpp", "data/plan/guide_line_base.hpp", "data/plan/guide_line.hpp" ], "commitId" : "9a74820c3b2f57fab0c7d2fca89776444bd9759a", "timestamp" : 1768536583000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配新的region\u000a", "date" : "2026-01-16 12:09:43 +0800", "id" : "9a74820c3b2f57fab0c7d2fca89776444bd9759a", "msg" : "feat:适配新的region", "paths" : [ { "editType" : "edit", "file" : "data/plan/guide_line_base.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/path_overlap.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.hpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_status.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp" ], "commitId" : "541dc093eafcf9cf973f6ec7aff62f3bb0e158fa", "timestamp" : 1768538038000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:终点距离的判断使用map distance\u000a", "date" : "2026-01-16 12:33:58 +0800", "id" : "541dc093eafcf9cf973f6ec7aff62f3bb0e158fa", "msg" : "feat:终点距离的判断使用map distance", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp" ], "commitId" : "12661d1c1c3938f93ef64569387f2a9f4bcad979", "timestamp" : 1768538306000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:终点距离的判断使用map distance\u000a", "date" : "2026-01-16 12:38:26 +0800", "id" : "12661d1c1c3938f93ef64569387f2a9f4bcad979", "msg" : "feat:终点距离的判断使用map distance", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/imv_enter_station_planner.h" ], "commitId" : "3cdfcf8a76e49522846b3d07d372e73a229cc0ec", "timestamp" : 1768538355000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:imv进停车位双向搜索的bug\u000a", "date" : "2026-01-16 12:39:15 +0800", "id" : "3cdfcf8a76e49522846b3d07d372e73a229cc0ec", "msg" : "fix:imv进停车位双向搜索的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_status.cpp" ], "commitId" : "033962050bafe981ff3742a1bb1135461c465d98", "timestamp" : 1768538361000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:切换到idle保持状态的bug\u000a", "date" : "2026-01-16 12:39:21 +0800", "id" : "033962050bafe981ff3742a1bb1135461c465d98", "msg" : "fix:切换到idle保持状态的bug", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/ssep/ssep_ec.cpp", "data/ssep/forward_ec.cpp" ], "commitId" : "cc9ca3fc4ea4958a3e4e77e5c032d47311fe432c", "timestamp" : 1768538367000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:苏溪,西联,董分 双向搜索的bug\u000a", "date" : "2026-01-16 12:39:27 +0800", "id" : "cc9ca3fc4ea4958a3e4e77e5c032d47311fe432c", "msg" : "feat:苏溪,西联,董分 双向搜索的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "cc86d71dd4dbf9821c41ba026045b2511eac99d8", "timestamp" : 1768538379000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:添加gitgnore\u000a", "date" : "2026-01-16 12:39:39 +0800", "id" : "cc86d71dd4dbf9821c41ba026045b2511eac99d8", "msg" : "chore:添加gitgnore", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/obstacle/ogm.hpp", "data/boundary/driving_corridor.cpp", "plan/prepare/prepare_ogm.cpp" ], "commitId" : "aa5d7f1729393528b055b3f5a3de209b56e14804", "timestamp" : 1768538386000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:驾驶走廊图构建的bug\u000a", "date" : "2026-01-16 12:39:46 +0800", "id" : "aa5d7f1729393528b055b3f5a3de209b56e14804", "msg" : "fix:驾驶走廊图构建的bug", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/ogm.hpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "data/boundary/driving_corridor.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "21d8d124b7c0802dce940f45ef0eb8b4f1bacd90", "timestamp" : 1768538391000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:删除多余的log\u000a", "date" : "2026-01-16 12:39:51 +0800", "id" : "21d8d124b7c0802dce940f45ef0eb8b4f1bacd90", "msg" : "chore:删除多余的log", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "math/util/math_utils.cc" ], "commitId" : "e8000704e0ab0a118938d53c0fa0cfef4cfa4bcd", "timestamp" : 1768538397000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整 float to half\u000a", "date" : "2026-01-16 12:39:57 +0800", "id" : "e8000704e0ab0a118938d53c0fa0cfef4cfa4bcd", "msg" : "feat:调整 float to half", "paths" : [ { "editType" : "edit", "file" : "math/util/math_utils.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_fsm.cpp" ], "commitId" : "a066d3e1dc4e63ac30b6626ace5f51ef6c61cc2f", "timestamp" : 1768801091000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复动态上下面过程中，提前切换到bulk场景的bug\u000a", "date" : "2026-01-19 13:38:11 +0800", "id" : "a066d3e1dc4e63ac30b6626ace5f51ef6c61cc2f", "msg" : "fix:修复动态上下面过程中，提前切换到bulk场景的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_fsm.cpp" ], "commitId" : "27ee5212cc6c7abbbbb7ad6be07780f7ac09c34a", "timestamp" : 1768801411000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复动态上下面过程中，提前切换到bulk场景的bug\u000a", "date" : "2026-01-19 13:43:31 +0800", "id" : "27ee5212cc6c7abbbbb7ad6be07780f7ac09c34a", "msg" : "fix:修复动态上下面过程中，提前切换到bulk场景的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_ogm.cpp" ], "commitId" : "df4487255e05eb20a9f2ecbdeceff66dddd3ab14", "timestamp" : 1768805745000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: ogm.height/width\u000a\u000a", "date" : "2026-01-19 14:55:45 +0800", "id" : "df4487255e05eb20a9f2ecbdeceff66dddd3ab14", "msg" : "fix: ogm.height/width", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_ogm.cpp" ], "commitId" : "5ead8be7cbd4b2b97a9c7cbbca2520f3ad7096f4", "timestamp" : 1768809823000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: ogm.height/width\u000a\u000a", "date" : "2026-01-19 16:03:43 +0800", "id" : "5ead8be7cbd4b2b97a9c7cbbca2520f3ad7096f4", "msg" : "fix: ogm.height/width", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/test/gpu_heuristic_test.cc", "ssep/coarse_search/gpu_batch_expander.cc", "ssep/test/gpu_collision_test_kernel.cu", "ssep/test/CMakeLists.txt", "ssep/gpu/device_map_data.cu", "ssep/test/gpu_heuristic_test_kernel.cu", "ssep/gpu/heur_table_loader.cu", "ssep/gpu/cost/path_length_cost.cuh", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h", "ssep/gpu/samplers/multi_curvature_sampler.cuh", "ssep/test/gpu_data_convert_test.cc", "ssep/test/gpu_sampler_test_kernel.cuh", "ssep/gpu/kernels/batch_expand_kernel.h", "ssep/gpu/memory_pool.h", "ssep/gpu/heur_table_loader.cc", "ssep/test/gpu_collision_test_kernel.cuh", "ssep/test/gpu_heuristic_test_kernel.cuh", "ssep/gpu/heur_table_loader.h", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h", "ssep/gpu/collision/collision_checker.cuh", "ssep/gpu/batch_expander_bridge.cu", "ssep/gpu/samplers/sampler_params.h", "ssep/gpu/device_map_data.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc", "ssep/test/gpu_collision_test.cc", "ssep/test/gpu_cost_test.cc", "ssep/gpu/kernels/batch_expand_kernel.cu", "ssep/gpu/device_utils.cuh", "ssep/gpu/heuristics/heuristic_computer.cuh", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/gpu/device_types.h", "ssep/CMakeLists.txt", "ssep/test/gpu_sampler_test.cc", "ssep/coarse_search/gpu_batch_expander.h", "ssep/test/gpu_sampler_test_kernel.cu", "ssep/gpu/memory_pool.cu", "ssep/ssep_planner.cc", "ssep/gpu/batch_expander_bridge.h", "ssep/gpu/device_map_data.cuh" ], "commitId" : "e8ec60fb9586797b8fa729ac049464ac8f89811d", "timestamp" : 1768814796000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 初步跑通GPU加速版本的进堆场搜索\u000a", "date" : "2026-01-19 17:26:36 +0800", "id" : "e8ec60fb9586797b8fa729ac049464ac8f89811d", "msg" : "feat: SSEP: 初步跑通GPU加速版本的进堆场搜索", "paths" : [ { "editType" : "edit", "file" : "ssep/test/CMakeLists.txt" }, { "editType" : "add", "file" : "ssep/test/gpu_sampler_test.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/gpu_batch_expander.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/gpu/samplers/multi_curvature_sampler.cuh" }, { "editType" : "add", "file" : "ssep/test/gpu_heuristic_test_kernel.cu" }, { "editType" : "add", "file" : "ssep/test/gpu_collision_test_kernel.cuh" }, { "editType" : "add", "file" : "ssep/test/gpu_heuristic_test.cc" }, { "editType" : "add", "file" : "ssep/gpu/kernels/batch_expand_kernel.cu" }, { "editType" : "add", "file" : "ssep/gpu/memory_pool.h" }, { "editType" : "add", "file" : "ssep/gpu/device_map_data.cuh" }, { "editType" : "add", "file" : "ssep/gpu/heur_table_loader.cu" }, { "editType" : "add", "file" : "ssep/gpu/heuristics/heuristic_computer.cuh" }, { "editType" : "add", "file" : "ssep/gpu/batch_expander_bridge.h" }, { "editType" : "add", "file" : "ssep/gpu/collision/collision_checker.cuh" }, { "editType" : "add", "file" : "ssep/gpu/device_types.h" }, { "editType" : "add", "file" : "ssep/gpu/heur_table_loader.cc" }, { "editType" : "add", "file" : "ssep/gpu/memory_pool.cu" }, { "editType" : "add", "file" : "ssep/gpu/cost/path_length_cost.cuh" }, { "editType" : "add", "file" : "ssep/gpu/device_utils.cuh" }, { "editType" : "add", "file" : "ssep/test/gpu_data_convert_test.cc" }, { "editType" : "add", "file" : "ssep/test/gpu_collision_test.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/test/gpu_collision_test_kernel.cu" }, { "editType" : "add", "file" : "ssep/gpu/samplers/sampler_params.h" }, { "editType" : "add", "file" : "ssep/test/gpu_sampler_test_kernel.cuh" }, { "editType" : "add", "file" : "ssep/gpu/device_map_data.h" }, { "editType" : "add", "file" : "ssep/gpu/heur_table_loader.h" }, { "editType" : "add", "file" : "ssep/test/gpu_sampler_test_kernel.cu" }, { "editType" : "add", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "add", "file" : "ssep/gpu/batch_expander_bridge.cu" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "add", "file" : "ssep/coarse_search/gpu_batch_expander.cc" }, { "editType" : "add", "file" : "ssep/test/gpu_cost_test.cc" }, { "editType" : "add", "file" : "ssep/gpu/device_map_data.cu" }, { "editType" : "add", "file" : "ssep/gpu/kernels/batch_expand_kernel.h" }, { "editType" : "add", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "add", "file" : "ssep/test/gpu_heuristic_test_kernel.cuh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/gpu/heuristics/heuristic_computer.cuh", "ssep/test/ssep_planner_test.cc", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc", "ssep/offboard/scene_replay/CMakeLists.txt" ], "commitId" : "4c7f0eea0f20d2774a07379f9c04cc1777d498e6", "timestamp" : 1768814821000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP-GPU: 通过所有测试用例\u000a\u000a", "date" : "2026-01-19 17:27:01 +0800", "id" : "4c7f0eea0f20d2774a07379f9c04cc1777d498e6", "msg" : "chore: SSEP-GPU: 通过所有测试用例", "paths" : [ { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/gpu/heuristics/heuristic_computer.cuh" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/offboard/scene_replay/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/gpu/cost/curvature_cost.cuh", "ssep/coarse_search/state_hasher.h", "ssep/test/CMakeLists.txt", "ssep/test/gpu_ref_line_cost_test_kernel.cu", "ssep/gpu/device_map_data.cu", "ssep/gpu/cost/path_length_cost.cuh", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h", "ssep/offboard/ssep_planner_wrapper.cc", "ssep/gpu/samplers/multi_curvature_sampler.cuh", "ssep/coarse_search/motion_primitive.h", "ssep/coarse_search/disk_collision_checker.h", "ssep/common/utils/scene_frame_visualization.h", "ssep/coarse_search/batched_priority_queue.h", "ssep/gpu/device_map_data.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc", "ssep/test/gpu_ref_line_cost_test.cc", "ssep/gpu/kernels/batch_expand_kernel.cu", "ssep/gpu/heuristics/heuristic_computer.cuh", "ssep/CMakeLists.txt", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/gpu/device_types.h", "ssep/gpu/cost/ref_line_cost.cuh", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/ssep_planner.cc", "ssep/test/gpu_ref_line_cost_test_kernel.cuh", "ssep/maps/sl_projection_map.h" ], "commitId" : "9660290466fc492978cdd2066bb3cdd5adb70f8a", "timestamp" : 1768814842000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: gpu search 性能优化\u000a\u000a", "date" : "2026-01-19 17:27:22 +0800", "id" : "9660290466fc492978cdd2066bb3cdd5adb70f8a", "msg" : "chore: SSEP: gpu search 性能优化", "paths" : [ { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/gpu/heuristics/heuristic_computer.cuh" }, { "editType" : "edit", "file" : "ssep/gpu/device_map_data.h" }, { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/disk_collision_checker.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/state_hasher.h" }, { "editType" : "edit", "file" : "ssep/gpu/cost/path_length_cost.cuh" }, { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/gpu/samplers/multi_curvature_sampler.cuh" }, { "editType" : "edit", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/test/CMakeLists.txt" }, { "editType" : "add", "file" : "ssep/coarse_search/batched_priority_queue.h" }, { "editType" : "edit", "file" : "ssep/common/utils/scene_frame_visualization.h" }, { "editType" : "add", "file" : "ssep/test/gpu_ref_line_cost_test_kernel.cu" }, { "editType" : "edit", "file" : "ssep/gpu/kernels/batch_expand_kernel.cu" }, { "editType" : "add", "file" : "ssep/gpu/cost/ref_line_cost.cuh" }, { "editType" : "add", "file" : "ssep/test/gpu_ref_line_cost_test.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "add", "file" : "ssep/test/gpu_ref_line_cost_test_kernel.cuh" }, { "editType" : "edit", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/gpu/device_types.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/motion_primitive.h" }, { "editType" : "edit", "file" : "ssep/gpu/device_map_data.cu" }, { "editType" : "add", "file" : "ssep/gpu/cost/curvature_cost.cuh" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/maps/sl_projection_map.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "161d316820ad30f5da6c3257ca76140440dfac1e", "timestamp" : 1768815252000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 同步ssep的imv进充电桩的更新\u000a\u000a", "date" : "2026-01-19 17:34:12 +0800", "id" : "161d316820ad30f5da6c3257ca76140440dfac1e", "msg" : "chore: SSEP: 同步ssep的imv进充电桩的更新", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_fuzzy_reversing_planner.h" ], "commitId" : "952ea5b4e8ebcf5e552e070ee9b8aa3bd6a05508", "timestamp" : 1768816486000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 前港倒车进货堆场景添加 fallback searcher。倒车不能到达的情况会使用通用搜索器搜索（现在可以支持向前到达货堆）。\u000a\u000a", "date" : "2026-01-19 17:54:46 +0800", "id" : "952ea5b4e8ebcf5e552e070ee9b8aa3bd6a05508", "msg" : "feat: SSEP: 前港倒车进货堆场景添加 fallback searcher。倒车不能到达的情况会使用通用搜索器搜索（现在可以支持向前到达货堆）。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/scene_frame_provider.cc", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/scenarios/truck_fuzzy_reversing_planner.h" ], "commitId" : "a5822c9b8c4f9e13049046ff40223e37ab9e762b", "timestamp" : 1768881389000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复回归测试失败的场景\u000a\u000a", "date" : "2026-01-20 11:56:29 +0800", "id" : "a5822c9b8c4f9e13049046ff40223e37ab9e762b", "msg" : "fix: SSEP: 修复回归测试失败的场景", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/scene_frame_provider.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/keb_optimizer/cost_features/state_constraint.h", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "1104a98f0c4fdf7218dac43989265d7292420779", "timestamp" : 1768890253000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 解决集卡普通搜索画龙的问题\u000a\u000a", "date" : "2026-01-20 14:24:13 +0800", "id" : "1104a98f0c4fdf7218dac43989265d7292420779", "msg" : "fix: SSEP: 解决集卡普通搜索画龙的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/state_constraint.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "0b110cab355d94612ba1176dbce47dcfedf6f834", "timestamp" : 1768892134000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复变道过程中，更新laneid的bug\u000a", "date" : "2026-01-20 14:55:34 +0800", "id" : "0b110cab355d94612ba1176dbce47dcfedf6f834", "msg" : "fix:修复变道过程中，更新laneid的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "610b436978cbc18d1a9a5cd80571252a9d4336ca", "timestamp" : 1768892435000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:出堆场的起始点从参考线上选取\u000a\u000a", "date" : "2026-01-20 15:00:35 +0800", "id" : "610b436978cbc18d1a9a5cd80571252a9d4336ca", "msg" : "refactor:出堆场的起始点从参考线上选取", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp", "data/plan/guide_line.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/ssep/ssep_ec.hpp", "data/plan/guide_line.hpp", "data/other/flow_control.hpp", "data/ssep/ssep_common.hpp" ], "commitId" : "d4d61862539f1a3100be295e5f7fb22961fed908", "timestamp" : 1768892510000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加lowbag 判断函数\u000a\u000a", "date" : "2026-01-20 15:01:50 +0800", "id" : "d4d61862539f1a3100be295e5f7fb22961fed908", "msg" : "feat: 添加lowbag 判断函数", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.hpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "tasks/plan/path_optimization_task.cpp" ], "commitId" : "3ff24dd7981ebec1880deb8a64977317b60a826d", "timestamp" : 1768894108000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: clear path_optimization_task esdf his.\u000a\u000a", "date" : "2026-01-20 15:28:28 +0800", "id" : "3ff24dd7981ebec1880deb8a64977317b60a826d", "msg" : "fix: clear path_optimization_task esdf his.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/ssep_planner_wrapper.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/data_structures/ssep_input.hpp", "ssep/scenarios/scenario_planner_factory.h", "ssep/ssep_planner.cc", "data/ssep/ssep_activation.cpp", "ssep/data_structures/ssep_input.cc", "ssep/ssep_planner.h", "ssep/protos/scene.proto" ], "commitId" : "357aab4612e9084c385829c22a8619713e261308", "timestamp" : 1768895116000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 增加万能参数接口\u000a\u000a", "date" : "2026-01-20 15:45:16 +0800", "id" : "357aab4612e9084c385829c22a8619713e261308", "msg" : "feat: SSEP: 增加万能参数接口", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/ssep_planner_wrapper.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "edit", "file" : "ssep/protos/scene.proto" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "34f52511f17d0b822c4c935449caf3f79be9bd49", "timestamp" : 1768900956000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 集卡进堆场支持通过extra_params获取车头拉直位置与车挂最大夹角并规划符合要求的路径。\u000a\u000a", "date" : "2026-01-20 17:22:36 +0800", "id" : "34f52511f17d0b822c4c935449caf3f79be9bd49", "msg" : "feat: SSEP: 集卡进堆场支持通过extra_params获取车头拉直位置与车挂最大夹角并规划符合要求的路径。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/scenario_planner_factory.h", "ssep/scenarios/truck_multi_segment_parking_planner.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "734b8645572f46693901e90cb6e34d6a40e8cc2c", "timestamp" : 1768905659000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 改进自卸车多段倒车\u000a\u000a", "date" : "2026-01-20 18:40:59 +0800", "id" : "734b8645572f46693901e90cb6e34d6a40e8cc2c", "msg" : "chore: SSEP: 改进自卸车多段倒车", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/search_decider/out_yard_junction_search_decider.cpp", "tasks/deciders/search_decider/normal_junction_search_decider.cpp", "tasks/deciders/search_decider/open_space_search_decider.cpp", "tasks/deciders/search_decider/reverse_search_decider.cpp", "data/ssep/forward_ec.cpp", "tasks/deciders/search_decider/seaside_junction_search_decider.cpp", "tasks/deciders/search_decider/into_yard_junction_search_decider.cpp", "tasks/deciders/search_decider/ex_lane_change_search_decider.cpp", "data/ssep/ssep_ec.cpp", "tasks/deciders/search_decider/bridge_junction_search_decider.cpp" ], "commitId" : "560bb1ec503c6500ce8a61eaa20bd23200725438", "timestamp" : 1768909433000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: 太阳纸业使用pncc_port_related参数配置SSEP场景\u000a\u000a", "date" : "2026-01-20 19:43:53 +0800", "id" : "560bb1ec503c6500ce8a61eaa20bd23200725438", "msg" : "feat: 太阳纸业使用pncc_port_related参数配置SSEP场景", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/bridge_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/reverse_search_decider.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/ex_lane_change_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/seaside_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/into_yard_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/normal_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/out_yard_junction_search_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/search_decider/open_space_search_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".clangd" ], "commitId" : "07727c1b099922dea2aa6be0057ce0b9937bc626", "timestamp" : 1768971526000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加clangd的配置文件\u000a\u000a", "date" : "2026-01-21 12:58:46 +0800", "id" : "07727c1b099922dea2aa6be0057ce0b9937bc626", "msg" : "feat:添加clangd的配置文件", "paths" : [ { "editType" : "add", "file" : ".clangd" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h" ], "commitId" : "2feed69ce35e1e753676a4a778ca8bb3651017d6", "timestamp" : 1768972185000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复集卡普通搜索路口有可能超近道的问题\u000a\u000a", "date" : "2026-01-21 13:09:45 +0800", "id" : "2feed69ce35e1e753676a4a778ca8bb3651017d6", "msg" : "fix: SSEP: 修复集卡普通搜索路口有可能超近道的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/field_junction_ec.hpp", "data/constrain/block_data.cpp", "data/other/flow_control.cpp", "data/ssep/ex_lane_change_ec.cpp", "data/ssep/field_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp", "data/obstacle/obstacle.hpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/other/flow_control.hpp", "data/ssep/ssep_common.hpp", "data/scenario/scenario_region_bt.cpp", "data/map/pnc_map/pnc_map_path.hpp", "data/obstacle/obstacle.cpp", "data/ssep/into_yard_junction_ec.hpp", "data/map/pnc_map/pnc_map_path.cpp", "tasks/deciders/other_decider/replan_decider.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/ssep/ssep_ec.hpp", "common/util/flag_register.hpp", "data/plan_frame.hpp", "data/scenario/scenario_region_condition.cpp" ], "commitId" : "43ba3e517a1b192720cd2d4f8de6e869813f0abd", "timestamp" : 1768973472000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整低贝位判断的逻辑，低贝位判断统一FlowController里面进行\u000a\u000a", "date" : "2026-01-21 13:31:12 +0800", "id" : "43ba3e517a1b192720cd2d4f8de6e869813f0abd", "msg" : "feat:调整低贝位判断的逻辑，低贝位判断统一FlowController里面进行", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/obstacle.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "data/other/flow_control.hpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/ssep/field_junction_ec.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.hpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_region_bt.cpp" }, { "editType" : "edit", "file" : "data/obstacle/obstacle.cpp" }, { "editType" : "edit", "file" : "data/ssep/ex_lane_change_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.hpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_region_condition.cpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "data/plan_frame.hpp" }, { "editType" : "add", "file" : "common/util/flag_register.hpp" }, { "editType" : "edit", "file" : "data/ssep/field_junction_ec.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/replan_decider.cpp" }, { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "72bfbb733ca41b31b2d4311d2d6de8f8ebacf496", "timestamp" : 1768984429000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: smooth logic\u000a\u000a", "date" : "2026-01-21 16:33:49 +0800", "id" : "72bfbb733ca41b31b2d4311d2d6de8f8ebacf496", "msg" : "fix: smooth logic", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" ], "commitId" : "246e5c7ef1721d0332bdb8ff09332e94b2045145", "timestamp" : 1768988131000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 解决进堆场画龙\u000a\u000a", "date" : "2026-01-21 17:35:31 +0800", "id" : "246e5c7ef1721d0332bdb8ff09332e94b2045145", "msg" : "fix: SSEP: 解决进堆场画龙", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/draw/draw_ssep.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/map/reference/reference_segment.cpp" ], "commitId" : "d503b7959a4acfea521167289c46d543fb43d79e", "timestamp" : 1769008897000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:调整大谢进堆场路径\u000a\u000a", "date" : "2026-01-21 23:21:37 +0800", "id" : "d503b7959a4acfea521167289c46d543fb43d79e", "msg" : "fix:调整大谢进堆场路径", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/map/reference/reference_segment.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_ssep.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.hpp", "data/ssep/base_stop_line_filter.cpp", "data/ssep/ssep_scenario_config_loader.hpp", "data/ssep/into_yard_junction_ec.cpp", "data/map/reference/reference_segment.cpp", "data/ssep/ssep_ec.hpp", "hmi/draw/draw_ssep.cpp", "data/ssep/ssep_ec.cpp", "data/ssep/ssep_scenario_config_loader.cpp", "tasks/other_tasks/stitch_path_data_to_path.cpp", "data/ssep/ssep_scenario_config.hpp" ], "commitId" : "070b69196b129681eef460f1620b33462974a6af", "timestamp" : 1769045810000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:规划路径和ssep路径不一致的问题分析\u000a\u000a", "date" : "2026-01-22 09:36:50 +0800", "id" : "070b69196b129681eef460f1620b33462974a6af", "msg" : "feat:规划路径和ssep路径不一致的问题分析", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_ssep.cpp" }, { "editType" : "edit", "file" : "data/ssep/base_stop_line_filter.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_scenario_config_loader.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_scenario_config_loader.hpp" }, { "editType" : "edit", "file" : "data/map/reference/reference_segment.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_scenario_config.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/log/log_config.cc", "common/log/log_config.cpp", "ssep/offboard/servers/CMakeLists.txt", "ssep/offboard/generate_scene_data/CMakeLists.txt", "ssep/offboard/CMakeLists.txt", "ssep/offboard/scene_replay/CMakeLists.txt", "CMakeLists.txt" ], "commitId" : "4be06fa6f13fb7a0a2593c20819438c6853d7feb", "timestamp" : 1769045924000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配clang\u000a\u000a", "date" : "2026-01-22 09:38:44 +0800", "id" : "4be06fa6f13fb7a0a2593c20819438c6853d7feb", "msg" : "feat:适配clang", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/servers/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/scene_replay/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/common/log/log_config.cc" }, { "editType" : "edit", "file" : "ssep/offboard/CMakeLists.txt" }, { "editType" : "edit", "file" : "common/log/log_config.cpp" }, { "editType" : "edit", "file" : "CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "a6d0caa75ba5399aacbb68c03414f7052497d4a7", "timestamp" : 1769053304000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 大榭只优化一次\u000a\u000a", "date" : "2026-01-22 11:41:44 +0800", "id" : "a6d0caa75ba5399aacbb68c03414f7052497d4a7", "msg" : "chore: SSEP: 大榭只优化一次", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/request_routing_data.cpp", "data/ssep/field_junction_ec.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp", "sink/ros_sink_ads_hfsm_state.cpp", "data/map/pnc_map/routing_extension/routing_help.cpp", "CMakeLists.txt", "data/map/pnc_map/pnc_map_path.hpp", "data/ssep/open_space_ec.cpp", "data/map/envelop/map_envelop.cpp", "data/app/cmd/cmd_set_target.cpp", "common/util/hdmap_wrapper.cpp", "common/util/hdmap_wrapper.hpp", "replayer/replayer_data_process/load_snap_data.cpp", "ssep/common/utils/map_element_utils.hpp", "data/map/reference/reference_road_section.cpp", "data/plan/guide_line_base.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/map/pnc_map/road_segments.cpp", "data/map/pnc_map/pnc_map.cpp", "data/ctrl/lka_start_up.cpp", "data/map/pnc_map/pnc_map_path.cpp", "data/constrain/pnc_junction.cpp", "data/map/reference/center_line.cpp", "hmi/draw/draw_map.cpp", "data/ssep/region_builder.cpp", "data/constrain/longitude_constrain.hpp", "sink/ros_sink_snapshot.cpp" ], "commitId" : "a76d736dff7835ae49f0f17053d51a06c3130a8a", "timestamp" : 1769067528000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:适配clang编译\u000a\u000a", "date" : "2026-01-22 15:38:48 +0800", "id" : "a76d736dff7835ae49f0f17053d51a06c3130a8a", "msg" : "refactor:适配clang编译", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_set_target.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_ads_hfsm_state.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/road_segments.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.cpp" }, { "editType" : "edit", "file" : "data/map/reference/reference_road_section.cpp" }, { "editType" : "edit", "file" : "data/map/reference/center_line.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_snapshot.cpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/region_builder.cpp" }, { "editType" : "edit", "file" : "common/util/hdmap_wrapper.hpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_map.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" }, { "editType" : "edit", "file" : "data/ctrl/lka_start_up.cpp" }, { "editType" : "edit", "file" : "data/map/envelop/map_envelop.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line_base.cpp" }, { "editType" : "edit", "file" : "ssep/common/utils/map_element_utils.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map.cpp" }, { "editType" : "edit", "file" : "data/constrain/pnc_junction.cpp" }, { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_help.cpp" }, { "editType" : "edit", "file" : "data/constrain/longitude_constrain.hpp" }, { "editType" : "edit", "file" : "data/vehicle/request_routing_data.cpp" }, { "editType" : "edit", "file" : "common/util/hdmap_wrapper.cpp" }, { "editType" : "edit", "file" : "data/ssep/field_junction_ec.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/utils/common.hpp" ], "commitId" : "08551b2332f90e122c2f1fcf97c2b1de3141ba85", "timestamp" : 1769067544000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:赋值的bug\u000a\u000a", "date" : "2026-01-22 15:39:04 +0800", "id" : "08551b2332f90e122c2f1fcf97c2b1de3141ba85", "msg" : "feat:赋值的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/common/utils/common.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/utils/map_element_utils.hpp" ], "commitId" : "5b929402a71df4cfd6ab95014b80ac47aa8cf160", "timestamp" : 1769092729000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:适配clang的bug\u000a", "date" : "2026-01-22 22:38:49 +0800", "id" : "5b929402a71df4cfd6ab95014b80ac47aa8cf160", "msg" : "fix:适配clang的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/common/utils/map_element_utils.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "9afcc5f9c45f5a770adcad060f637d12836d3a2d", "timestamp" : 1769092833000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复甩正点的bug\u000a", "date" : "2026-01-22 22:40:33 +0800", "id" : "9afcc5f9c45f5a770adcad060f637d12836d3a2d", "msg" : "fix:修复甩正点的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/guide_line_info.hpp" ], "commitId" : "719043875afe09c441bf6cc5d0f20760b326f07c", "timestamp" : 1769092851000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配clang\u000a", "date" : "2026-01-22 22:40:51 +0800", "id" : "719043875afe09c441bf6cc5d0f20760b326f07c", "msg" : "feat:适配clang", "paths" : [ { "editType" : "edit", "file" : "data/plan/guide_line_info.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "ed942ed5c3e3da22522efc8bf6f42f96d906a4c7", "timestamp" : 1769092891000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:甩正点距离适配\u000a", "date" : "2026-01-22 22:41:31 +0800", "id" : "ed942ed5c3e3da22522efc8bf6f42f96d906a4c7", "msg" : "feat:甩正点距离适配", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "4ba94c3523bead83b3c8474daeb637a970cf413a", "timestamp" : 1769136504000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix:修复甩正点的bug\u000a", "date" : "2026-01-23 10:48:24 +0800", "id" : "4ba94c3523bead83b3c8474daeb637a970cf413a", "msg" : "fix:修复甩正点的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "21afd222d152fd648eb869a481d014955f6354fe", "timestamp" : 1769137586000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复路径跳变的bug\u000a\u000a", "date" : "2026-01-23 11:06:26 +0800", "id" : "21afd222d152fd648eb869a481d014955f6354fe", "msg" : "fix:修复路径跳变的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/draw/draw_constrain.cpp", "data/config/cfg_decision.hpp", "algorithm/decision/path_collision_detection.cpp", "data/config/cfg_decision.cpp", "data/semantic/semantic.hpp", "data/semantic/semantic_description.hpp", "tasks/deciders/long_decider/constrain_decider.cpp", "algorithm/decision/rule_base_behavior.cpp", "algorithm/decision/risk_aware_contingency_planning.cpp", "algorithm/decision/longitudinal_decision_3.hpp", "algorithm/decision/risk_aware_contingency_planning.hpp", "data/semantic/semantic.cpp", "algorithm/decision/longitudinal_decision_3.cpp", "decision/process/proc_longitudinal_decision.cpp", "algorithm/decision/simulator/forward_simulation.hpp", "data/semantic/semantic_description.cpp", "algorithm/decision/simulator/forward_simulation.cpp", "algorithm/decision/semantic_set_transformation_2.cpp" ], "commitId" : "2caa8631399569f1c5d327fdfc6b587c23d3f5e6", "timestamp" : 1769139179000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using LD v1\u000a\u000a", "date" : "2026-01-23 11:32:59 +0800", "id" : "2caa8631399569f1c5d327fdfc6b587c23d3f5e6", "msg" : "fix: using LD v1", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_decision.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_decision.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_constrain.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/semantic_set_transformation_2.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic.cpp" }, { "editType" : "edit", "file" : "decision/process/proc_longitudinal_decision.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/path_collision_detection.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.hpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/semantic/semantic_description.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.hpp" }, { "editType" : "edit", "file" : "algorithm/decision/rule_base_behavior.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/risk_aware_contingency_planning.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/simulator/forward_simulation.hpp" }, { "editType" : "edit", "file" : "algorithm/decision/longitudinal_decision_3.cpp" }, { "editType" : "edit", "file" : "algorithm/decision/risk_aware_contingency_planning.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "ea547e2c2f9770dd15786b6c2b5ea2c73e14d8bc", "timestamp" : 1769149120000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配大谢右转进堆场\u000a", "date" : "2026-01-23 14:18:40 +0800", "id" : "ea547e2c2f9770dd15786b6c2b5ea2c73e14d8bc", "msg" : "feat:适配大谢右转进堆场", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "784947ed0f728824865680174e8e22c9370fe74c", "timestamp" : 1769149387000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配大谢右转进堆场\u000a", "date" : "2026-01-23 14:23:07 +0800", "id" : "784947ed0f728824865680174e8e22c9370fe74c", "msg" : "feat:适配大谢右转进堆场", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "data/ssep/forward_ec.cpp", "data/plan/guide_line.cpp", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/protos/ssep_scenario_type.proto", "ssep/scenarios/scenario_planner_factory.h", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "data/ssep/forward_ec.hpp", "ssep/ssep_planner.cc", "ssep/data_structures/ssep_scenario_type.hpp", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/tractor_trailer_single_segment_parking_planner.h" ], "commitId" : "778e39df9d5633bc8a08483e0e46719b8e5c234b", "timestamp" : 1769154193000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: ssep 威海多段倒车支持按键拉直功能\u000a\u000a", "date" : "2026-01-23 15:43:13 +0800", "id" : "778e39df9d5633bc8a08483e0e46719b8e5c234b", "msg" : "feat: ssep 威海多段倒车支持按键拉直功能", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.hpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "add", "file" : "ssep/scenarios/tractor_trailer_single_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_scenario_type.hpp" }, { "editType" : "edit", "file" : "ssep/protos/ssep_scenario_type.proto" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_long_plan.hpp", "data/config/cfg_long_plan.cpp" ], "commitId" : "b8e9cb38a01dbffa996c2dcfd50193f8981466a5", "timestamp" : 1769188261000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配缩小根据距离\u000a", "date" : "2026-01-24 01:11:01 +0800", "id" : "b8e9cb38a01dbffa996c2dcfd50193f8981466a5", "msg" : "feat:适配缩小根据距离", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_long_plan.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_long_plan.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "69a3f62b7e082cc088f5c611c52af7be70ca6dbf", "timestamp" : 1769188317000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整counter和进堆场障碍物考虑的条件\u000a", "date" : "2026-01-24 01:11:57 +0800", "id" : "69a3f62b7e082cc088f5c611c52af7be70ca6dbf", "msg" : "feat:调整counter和进堆场障碍物考虑的条件", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.hpp", "data/boundary/road_boundary.hpp", ".gitignore", "data/boundary/road_boundary.cpp", "data/config/cfg_lat_plan.cpp" ], "commitId" : "17faf7af8cf2e711f6573e55c046a82c8f662cac", "timestamp" : 1769226551000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:单车道区分左右边界\u000a", "date" : "2026-01-24 11:49:11 +0800", "id" : "17faf7af8cf2e711f6573e55c046a82c8f662cac", "msg" : "feat:单车道区分左右边界", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "e5e51f24c2a40acd10acaf124c3b47bd7b1bf091", "timestamp" : 1769338509000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:大谢单车道，低贝位判断的bug\u000a", "date" : "2026-01-25 18:55:09 +0800", "id" : "e5e51f24c2a40acd10acaf124c3b47bd7b1bf091", "msg" : "fix:大谢单车道，低贝位判断的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/legacy_searchers/dubin_path.h", "ssep/coarse_search/legacy_searchers/reeds_shepp_path.h", "ssep/coarse_search/motion_primitive_sampler/dubins_path.h" ], "commitId" : "c277b698576ee96535fc9b570bdc19149e381b9a", "timestamp" : 1769405532000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: del omp.h\u000a\u000a", "date" : "2026-01-26 13:32:12 +0800", "id" : "c277b698576ee96535fc9b570bdc19149e381b9a", "msg" : "fix: del omp.h", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searchers/reeds_shepp_path.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searchers/dubin_path.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/motion_primitive_sampler/dubins_path.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_activation.hpp", "data/ssep/ssep_activation.cpp", "tasks/plan/ssep_task.cpp" ], "commitId" : "3a8d1adfc7e724c32174d160b34780e24b429f39", "timestamp" : 1769412277000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:搜索尺寸参数赋值\u000a\u000a", "date" : "2026-01-26 15:24:37 +0800", "id" : "3a8d1adfc7e724c32174d160b34780e24b429f39", "msg" : "feat:搜索尺寸参数赋值", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_activation.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "tasks/plan/ssep_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_activation.cpp" ], "commitId" : "1cffa4bc11b05fb982ff0e3acff2bb37bf8d0f76", "timestamp" : 1769412480000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:车辆参数赋值错误的bug\u000a\u000a", "date" : "2026-01-26 15:28:00 +0800", "id" : "1cffa4bc11b05fb982ff0e3acff2bb37bf8d0f76", "msg" : "fix:车辆参数赋值错误的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "5829ba77d099cf753fd2273878b8d9ced6b8dc0a", "timestamp" : 1769415263000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: smooth mode in yard.\u000a\u000a", "date" : "2026-01-26 16:14:23 +0800", "id" : "5829ba77d099cf753fd2273878b8d9ced6b8dc0a", "msg" : "fix: smooth mode in yard.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "6dc839429f73faaba88aa15ae2984d1bc6087782", "timestamp" : 1769415626000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: smooth mode in yard.\u000a\u000a", "date" : "2026-01-26 16:20:26 +0800", "id" : "6dc839429f73faaba88aa15ae2984d1bc6087782", "msg" : "fix: smooth mode in yard.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "01ed49e3a1d9c26061f22cce93fef69876d1aa21", "timestamp" : 1769419206000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整counter和进堆场障碍物考虑的条件\u000a", "date" : "2026-01-26 17:20:06 +0800", "id" : "01ed49e3a1d9c26061f22cce93fef69876d1aa21", "msg" : "feat:调整counter和进堆场障碍物考虑的条件", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_long_plan.hpp", "data/config/cfg_long_plan.cpp" ], "commitId" : "598683d36f71ad4f7d35b8485a3b068b4bd718b2", "timestamp" : 1769419219000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配缩小根据距离\u000a", "date" : "2026-01-26 17:20:19 +0800", "id" : "598683d36f71ad4f7d35b8485a3b068b4bd718b2", "msg" : "feat:适配缩小根据距离", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_long_plan.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_long_plan.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.hpp", ".gitignore", "data/boundary/road_boundary.hpp", "data/config/cfg_lat_plan.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "cf6c87b43e975690d82afcbd9a0fc904ed475f19", "timestamp" : 1769419236000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:单车道区分左右边界\u000a", "date" : "2026-01-26 17:20:36 +0800", "id" : "cf6c87b43e975690d82afcbd9a0fc904ed475f19", "msg" : "feat:单车道区分左右边界", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" }, { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.hpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "b3a245602d54adb5a669b15f94340edc3afe702c", "timestamp" : 1769419244000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:大谢单车道，低贝位判断的bug\u000a", "date" : "2026-01-26 17:20:44 +0800", "id" : "b3a245602d54adb5a669b15f94340edc3afe702c", "msg" : "fix:大谢单车道，低贝位判断的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/CMakeLists.txt", "data/ssep/into_yard_junction_ec.cpp", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/ssep_planner.cc", "data/ssep/ssep_common.hpp", "data/ssep/ssep_ec.cpp", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h" ], "commitId" : "f476a6002ce2d91832331f00374741e3301853ce", "timestamp" : 1769432736000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 大榭、杨浦的SSEP场景从配置文件传入。支持添加参数切换到gpu搜索。\u000a\u000a", "date" : "2026-01-26 21:05:36 +0800", "id" : "f476a6002ce2d91832331f00374741e3301853ce", "msg" : "feat: SSEP: 大榭、杨浦的SSEP场景从配置文件传入。支持添加参数切换到gpu搜索。", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/batched_priority_queue.h" ], "commitId" : "1fa72800e97f70e7a4c67967c01ded79f57b5d46", "timestamp" : 1769434122000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: fix GPU search bug\u000a\u000a", "date" : "2026-01-26 21:28:42 +0800", "id" : "1fa72800e97f70e7a4c67967c01ded79f57b5d46", "msg" : "fix: SSEP: fix GPU search bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/batched_priority_queue.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "f10526944c6e43dfac95d52a8d5319fd4de052f8", "timestamp" : 1769437678000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化进堆场的约束\u000a", "date" : "2026-01-26 22:27:58 +0800", "id" : "f10526944c6e43dfac95d52a8d5319fd4de052f8", "msg" : "feat:优化进堆场的约束", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "47181462b33b701b0a15fc9a6b6ea3eb8ec3678e", "timestamp" : 1769443063000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:into 都使用双向搜索\u000a", "date" : "2026-01-26 23:57:43 +0800", "id" : "47181462b33b701b0a15fc9a6b6ea3eb8ec3678e", "msg" : "feat:into 都使用双向搜索", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "e1fa7f1ad37ac5c0aab5b554ff59b76128c68f6f", "timestamp" : 1769443103000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:龙门吊位置计算的bug\u000a", "date" : "2026-01-26 23:58:23 +0800", "id" : "e1fa7f1ad37ac5c0aab5b554ff59b76128c68f6f", "msg" : "feat:龙门吊位置计算的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "1b760c513a0c5603ad2435fc24fa96e8ace8d6b9", "timestamp" : 1769443183000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:into 都使用双向搜索\u000a", "date" : "2026-01-26 23:59:43 +0800", "id" : "1b760c513a0c5603ad2435fc24fa96e8ace8d6b9", "msg" : "feat:into 都使用双向搜索", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "4b5bcfcaac8558e19ecc2d0738c8606e14e4727a", "timestamp" : 1769443191000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:龙门吊位置计算的bug\u000a", "date" : "2026-01-26 23:59:51 +0800", "id" : "4b5bcfcaac8558e19ecc2d0738c8606e14e4727a", "msg" : "feat:龙门吊位置计算的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "573de177610e2a61d4dbbbde539bfc2c9e302761", "timestamp" : 1769443233000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化进堆场的约束\u000a", "date" : "2026-01-27 00:00:33 +0800", "id" : "573de177610e2a61d4dbbbde539bfc2c9e302761", "msg" : "feat:优化进堆场的约束", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/ssep_planner.cc", "ssep/keb_optimizer/cost_features/curvature_cost.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "e81a86160acda52f09e62d9cec5c57698f38261c", "timestamp" : 1769497419000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复大榭进堆场车体距离边界太近的问题\u000a\u000a", "date" : "2026-01-27 15:03:39 +0800", "id" : "e81a86160acda52f09e62d9cec5c57698f38261c", "msg" : "fix: SSEP: 修复大榭进堆场车体距离边界太近的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/curvature_cost.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/plan/ssep_data.hpp", "data/plan/guide_line.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp", "data/ssep/ssep_common.hpp", "data/vehicle/vehicle_destination.cpp", "data/ssep/open_space_ec.cpp", "plan/prepare/prepare_state.cpp", "data/ssep/online_region_contour_creator.cpp", "data/ssep/open_space_ec.hpp", "data/app/fsm/task_fsm/task_fsm.cpp", "data/plan/path_direction_data.cpp", "data/boundary/road_boundary.cpp", "ssep/ssep_planner.cc" ], "commitId" : "0918edea4764dc1622e26b61c27bf4d746ed1e1d", "timestamp" : 1769501107000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配 utrun掉头\u000a", "date" : "2026-01-27 16:05:07 +0800", "id" : "0918edea4764dc1622e26b61c27bf4d746ed1e1d", "msg" : "feat:适配 utrun掉头", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_state.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" }, { "editType" : "edit", "file" : "data/plan/path_direction_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.hpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/ssep/online_region_contour_creator.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "f115c897aad1807c8d75e9765aba8550a0050773", "timestamp" : 1769501159000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:修复.gitignore\u000a", "date" : "2026-01-27 16:05:59 +0800", "id" : "f115c897aad1807c8d75e9765aba8550a0050773", "msg" : "chore:修复.gitignore", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/CMakeLists.txt", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "data/ssep/into_yard_junction_ec.cpp", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/ssep_planner.cc", "data/ssep/ssep_ec.cpp", "data/ssep/ssep_common.hpp", "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h" ], "commitId" : "f268a74b18ba6176f74160a2995062ac0991a9a8", "timestamp" : 1769502491000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 大榭、杨浦的SSEP场景从配置文件传入。支持添加参数切换到gpu搜索。\u000a", "date" : "2026-01-27 16:28:11 +0800", "id" : "f268a74b18ba6176f74160a2995062ac0991a9a8", "msg" : "feat: SSEP: 大榭、杨浦的SSEP场景从配置文件传入。支持添加参数切换到gpu搜索。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/batched_priority_queue.h" ], "commitId" : "0cbb908c171063afdab58b9d76ed9a2ee537b5cf", "timestamp" : 1769502507000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: fix GPU search bug\u000a\u000a", "date" : "2026-01-27 16:28:27 +0800", "id" : "0cbb908c171063afdab58b9d76ed9a2ee537b5cf", "msg" : "fix: SSEP: fix GPU search bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/batched_priority_queue.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/ssep_planner.cc", "ssep/keb_optimizer/cost_features/curvature_cost.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "cf00827bc84a946f8280069b1350cc86ba37eab1", "timestamp" : 1769502519000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复大榭进堆场车体距离边界太近的问题\u000a\u000a", "date" : "2026-01-27 16:28:39 +0800", "id" : "cf00827bc84a946f8280069b1350cc86ba37eab1", "msg" : "fix: SSEP: 修复大榭进堆场车体距离边界太近的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/curvature_cost.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/common/guide_path.hpp", "data/config/cfg_env_const.hpp", "data/config/cfg_env_const.cpp", "data/common/guide_path.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "679116086a91458a6ecb776740848834fcaaab23", "timestamp" : 1769521702000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加通过lane id 配置不绕行区域的功能\u000a", "date" : "2026-01-27 21:48:22 +0800", "id" : "679116086a91458a6ecb776740848834fcaaab23", "msg" : "feat:添加通过lane id 配置不绕行区域的功能", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/common/guide_path.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "data/common/guide_path.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "37835a26e4b5c069b732959899c414254c0751f3", "timestamp" : 1769524676000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:大谢进堆场配置甩正的位置\u000a", "date" : "2026-01-27 22:37:56 +0800", "id" : "37835a26e4b5c069b732959899c414254c0751f3", "msg" : "feat:大谢进堆场配置甩正的位置", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/plan/ssep_data.hpp", "data/plan/guide_line.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp", "data/ssep/ssep_common.hpp", "data/vehicle/vehicle_destination.cpp", "data/ssep/open_space_ec.cpp", "plan/prepare/prepare_state.cpp", "data/ssep/online_region_contour_creator.cpp", "data/ssep/open_space_ec.hpp", "data/app/fsm/task_fsm/task_fsm.cpp", "data/plan/path_direction_data.cpp", "data/boundary/road_boundary.cpp", "ssep/ssep_planner.cc" ], "commitId" : "2becdec1645e83113380b66e4a91cc0fd05f0d76", "timestamp" : 1769524757000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配 utrun掉头\u000a", "date" : "2026-01-27 22:39:17 +0800", "id" : "2becdec1645e83113380b66e4a91cc0fd05f0d76", "msg" : "feat:适配 utrun掉头", "paths" : [ { "editType" : "edit", "file" : "data/plan/path_direction_data.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_state.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.hpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.hpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" }, { "editType" : "edit", "file" : "data/ssep/online_region_contour_creator.cpp" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/common/guide_path.hpp", "data/config/cfg_env_const.hpp", "data/config/cfg_env_const.cpp", "data/common/guide_path.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "c2ca73e3e18779fb30af04b3d90756a1544e93e4", "timestamp" : 1769524772000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加通过lane id 配置不绕行区域的功能\u000a", "date" : "2026-01-27 22:39:32 +0800", "id" : "c2ca73e3e18779fb30af04b3d90756a1544e93e4", "msg" : "feat:添加通过lane id 配置不绕行区域的功能", "paths" : [ { "editType" : "edit", "file" : "data/common/guide_path.hpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/common/guide_path.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "4eb0b998056f1cb9be48d1e97830cfcc9bea27c6", "timestamp" : 1769524892000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配大谢右转进堆场\u000a", "date" : "2026-01-27 22:41:32 +0800", "id" : "4eb0b998056f1cb9be48d1e97830cfcc9bea27c6", "msg" : "feat:适配大谢右转进堆场", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_long_plan.hpp", "data/config/cfg_long_plan.cpp" ], "commitId" : "6b54177535b572f5a57da6728ddb1c03f88855c4", "timestamp" : 1769524915000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:适配缩小根据距离\u000a", "date" : "2026-01-27 22:41:55 +0800", "id" : "6b54177535b572f5a57da6728ddb1c03f88855c4", "msg" : "feat:适配缩小根据距离", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_long_plan.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_long_plan.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp", "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "46cb4d2b2c18e4ff6a626eb5eec9e79a28cb98fa", "timestamp" : 1769524928000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整counter和进堆场障碍物考虑的条件\u000a", "date" : "2026-01-27 22:42:08 +0800", "id" : "46cb4d2b2c18e4ff6a626eb5eec9e79a28cb98fa", "msg" : "feat:调整counter和进堆场障碍物考虑的条件", "paths" : [ { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.hpp", ".gitignore", "data/boundary/road_boundary.hpp", "data/config/cfg_lat_plan.cpp", "data/boundary/road_boundary.cpp" ], "commitId" : "6bdf3e1319d42e2e43356edc1ce7422971306bda", "timestamp" : 1769524939000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:单车道区分左右边界\u000a", "date" : "2026-01-27 22:42:19 +0800", "id" : "6bdf3e1319d42e2e43356edc1ce7422971306bda", "msg" : "feat:单车道区分左右边界", "paths" : [ { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "e96ae14dff51ef049a1dfa957263fcea6b99c6eb", "timestamp" : 1769524947000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:大谢单车道，低贝位判断的bug\u000a", "date" : "2026-01-27 22:42:27 +0800", "id" : "e96ae14dff51ef049a1dfa957263fcea6b99c6eb", "msg" : "fix:大谢单车道，低贝位判断的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "73728442cc85684ba68b9d2405dd6764fe5ef5f8", "timestamp" : 1769524963000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化进堆场的约束\u000a", "date" : "2026-01-27 22:42:43 +0800", "id" : "73728442cc85684ba68b9d2405dd6764fe5ef5f8", "msg" : "feat:优化进堆场的约束", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "d7b6974dfd439341297fef1f7057284055ded10e", "timestamp" : 1769525002000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:龙门吊位置计算的bug\u000a", "date" : "2026-01-27 22:43:22 +0800", "id" : "d7b6974dfd439341297fef1f7057284055ded10e", "msg" : "feat:龙门吊位置计算的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "302964080da5748bc50baf1dcf8c2112163300a6", "timestamp" : 1769525018000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "Auto stash before cherrypick of \"feat:龙门吊位置计算的bug\"\u000a", "date" : "2026-01-27 22:43:38 +0800", "id" : "302964080da5748bc50baf1dcf8c2112163300a6", "msg" : "Auto stash before cherrypick of \"feat:龙门吊位置计算的bug\"", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "60dbde4290ae73ce3e689e9e217c70d24c81be7c", "timestamp" : 1769525073000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore:修复.gitignore\u000a", "date" : "2026-01-27 22:44:33 +0800", "id" : "60dbde4290ae73ce3e689e9e217c70d24c81be7c", "msg" : "chore:修复.gitignore", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "96880d9171d734fd7d456be80ddfa9253f7ce4cf", "timestamp" : 1769525091000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:大谢进堆场配置甩正的位置\u000a", "date" : "2026-01-27 22:44:51 +0800", "id" : "96880d9171d734fd7d456be80ddfa9253f7ce4cf", "msg" : "feat:大谢进堆场配置甩正的位置", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/scene_replay/CMakeLists.txt", "ssep/CMakeLists.txt", "CMakeLists.txt" ], "commitId" : "1b18ef6b5728a991dc7999a0acbf6d3fa382b99f", "timestamp" : 1769535186000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 解决gpu编译问题\u000a\u000a", "date" : "2026-01-28 01:33:06 +0800", "id" : "1b18ef6b5728a991dc7999a0acbf6d3fa382b99f", "msg" : "fix: SSEP: 解决gpu编译问题", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/scene_replay/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "edit", "file" : "CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "CMakeLists.txt" ], "commitId" : "b9b3bd6e9b4435826d6e8fccc957058de29d152a", "timestamp" : 1769566478000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: gpu compile error\u000a\u000a", "date" : "2026-01-28 10:14:38 +0800", "id" : "b9b3bd6e9b4435826d6e8fccc957058de29d152a", "msg" : "fix: SSEP: gpu compile error", "paths" : [ { "editType" : "edit", "file" : "CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/CMakeLists.txt", "ssep/offboard/servers/CMakeLists.txt", "CMakeLists.txt", "ssep/offboard/generate_scene_data/CMakeLists.txt" ], "commitId" : "6460e7ff9ec2cb3de2e848f11a261d000f3fe60c", "timestamp" : 1769566629000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复编译报错\u000a\u000a", "date" : "2026-01-28 10:17:09 +0800", "id" : "6460e7ff9ec2cb3de2e848f11a261d000f3fe60c", "msg" : "fix:修复编译报错", "paths" : [ { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/servers/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/offboard/CMakeLists.txt", "ssep/offboard/servers/CMakeLists.txt", "CMakeLists.txt", "ssep/offboard/generate_scene_data/CMakeLists.txt" ], "commitId" : "95ec02275057819dc75132f6c4243563271e48bc", "timestamp" : 1769566670000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复编译报错\u000a\u000a", "date" : "2026-01-28 10:17:50 +0800", "id" : "95ec02275057819dc75132f6c4243563271e48bc", "msg" : "fix:修复编译报错", "paths" : [ { "editType" : "edit", "file" : "ssep/offboard/servers/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/CMakeLists.txt" }, { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/offboard/generate_scene_data/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "common/behaviour_tree/bt_composite.hpp", "data/app/cmd/cmd_fsm/ifsm.hpp", "data/vehicle/related_offset.cpp", "data/app/cmd/cmd_dead_lock.hpp", "replayer/logic.cpp", "data/app/cmd/cmd_set_target.hpp", "algorithm/plan/plot_st_graph.cpp", "data/app/cmd/cmd_set_target.cpp", "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.cc", "hmi/common/status_sign.hpp", "math/smoothing/fem_pos_deviation_interface.h", "data/app/cmd/cmd_remote.cpp", "source/ros_source_ads_target.cpp", "data/app/fsm/task_command_type.cpp", "hmi/draw/draw_perception.cpp", "data/config/iconfig.hpp", "replayer/replayer_data_process/load_snap_data.cpp", "data/ssep/reverse_ec.cpp", "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.cc", "data/app/cmd/cmd_traffic_light.hpp", "data/app/cmd/cmd_cancel_lock.hpp", "replayer/replayer_data_process/replayer_data_extraction.cpp", "data/app/cmd/cmd_cancel_expand.hpp", "math/curve2d/curve2d.hpp", "ssep/scenarios/scenario_planner_factory.h", "source/ros_source_ads_command.cpp", "data/snapshot_data.hpp", "data/plan/reference_line_info.hpp", "math/curve2d/icurve.hpp", "data/app/cmd/cmd_cancel_safe.hpp", "data/obstacle/occupy_grid.hpp", "hmi/node_hmi.hpp", "data/app/cmd/cmd_align.cpp", "data/app/cmd/cmd_fsm/fsm_base.hpp", "data/app/app_data.cpp", "data/app/cmd/cmd_nstop.hpp", "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.cc" ], "commitId" : "9248ef43aac2717f6f5df4e1b107f6c88f584e11", "timestamp" : 1769580900000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:修复编译的warning\u000a", "date" : "2026-01-28 14:15:00 +0800", "id" : "9248ef43aac2717f6f5df4e1b107f6c88f584e11", "msg" : "feat:修复编译的warning", "paths" : [ { "editType" : "edit", "file" : "source/ros_source_ads_target.cpp" }, { "editType" : "edit", "file" : "common/behaviour_tree/bt_composite.hpp" }, { "editType" : "edit", "file" : "math/curve2d/icurve.hpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_command_type.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.cc" }, { "editType" : "edit", "file" : "data/app/app_data.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_nstop.hpp" }, { "editType" : "edit", "file" : "math/smoothing/fem_pos_deviation_interface.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.cc" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_traffic_light.hpp" }, { "editType" : "edit", "file" : "data/plan/reference_line_info.hpp" }, { "editType" : "edit", "file" : "math/curve2d/curve2d.hpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_cancel_lock.hpp" }, { "editType" : "edit", "file" : "replayer/logic.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "data/ssep/reverse_ec.cpp" }, { "editType" : "edit", "file" : "data/vehicle/related_offset.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_perception.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_dead_lock.hpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_extraction.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_cancel_safe.hpp" }, { "editType" : "edit", "file" : "source/ros_source_ads_command.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_fsm/fsm_base.hpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.cc" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_set_target.cpp" }, { "editType" : "edit", "file" : "hmi/node_hmi.hpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_fsm/ifsm.hpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_cancel_expand.hpp" }, { "editType" : "edit", "file" : "data/config/iconfig.hpp" }, { "editType" : "edit", "file" : "hmi/common/status_sign.hpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_align.cpp" }, { "editType" : "edit", "file" : "data/obstacle/occupy_grid.hpp" }, { "editType" : "edit", "file" : "data/snapshot_data.hpp" }, { "editType" : "edit", "file" : "algorithm/plan/plot_st_graph.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_set_target.hpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/load_snap_data.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_remote.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/evaluator.h", "ssep/ssep_planner.cc" ], "commitId" : "65d6c2cce2d8aff5b0e73f4892a819ac9e5e0f33", "timestamp" : 1769584190000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复“最后一段不检测碰撞”功能遗漏的提交\u000a\u000a", "date" : "2026-01-28 15:09:50 +0800", "id" : "65d6c2cce2d8aff5b0e73f4892a819ac9e5e0f33", "msg" : "fix: SSEP: 修复“最后一段不检测碰撞”功能遗漏的提交", "paths" : [ { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/test/ssep_planner_test.cc", "ssep/test/CMakeLists.txt" ], "commitId" : "31851ec9d69d2ed7443eb19fdff3d3d6425cc657", "timestamp" : 1769585857000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: update unit tests\u000a\u000a", "date" : "2026-01-28 15:37:37 +0800", "id" : "31851ec9d69d2ed7443eb19fdff3d3d6425cc657", "msg" : "chore: SSEP: update unit tests", "paths" : [ { "editType" : "edit", "file" : "ssep/test/CMakeLists.txt" }, { "editType" : "edit", "file" : "ssep/test/ssep_planner_test.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/data_structures/map_element_polyline.cc", "ssep/common/utils/map_element_utils.hpp" ], "commitId" : "a09c14f8c55f3b7508e314a72e37b2f5cf6e1d44", "timestamp" : 1769588079000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复地图元素\"is_closed\"标志位转换错误的问题\u000a\u000a", "date" : "2026-01-28 16:14:39 +0800", "id" : "a09c14f8c55f3b7508e314a72e37b2f5cf6e1d44", "msg" : "fix: SSEP: 修复地图元素\"is_closed\"标志位转换错误的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/data_structures/map_element_polyline.cc" }, { "editType" : "edit", "file" : "ssep/common/utils/map_element_utils.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/forward_ec.cpp" ], "commitId" : "fbde8c264fca5973e84f32572931fc56ca9d01a5", "timestamp" : 1769588620000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:编译warnig\u000a", "date" : "2026-01-28 16:23:40 +0800", "id" : "fbde8c264fca5973e84f32572931fc56ca9d01a5", "msg" : "feat:编译warnig", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/lock_station_data.cpp", "data/scenario/scenario_manager.cpp", "data/scenario/scenario_manager.hpp" ], "commitId" : "907c83937e0f2d2f9c02e688e5ad81278acc83d8", "timestamp" : 1769588687000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:锁站限速过滤\u000a", "date" : "2026-01-28 16:24:47 +0800", "id" : "907c83937e0f2d2f9c02e688e5ad81278acc83d8", "msg" : "feat:锁站限速过滤", "paths" : [ { "editType" : "edit", "file" : "data/scenario/scenario_manager.hpp" }, { "editType" : "edit", "file" : "data/vehicle/lock_station_data.cpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "c6b6ccf20c7d513449b81457bb07ebd12f6e611b", "timestamp" : 1769590927000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using smooth mode when opt failed.\u000a\u000a", "date" : "2026-01-28 17:02:07 +0800", "id" : "c6b6ccf20c7d513449b81457bb07ebd12f6e611b", "msg" : "fix: using smooth mode when opt failed.", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/scenarios/scenario_planner_factory.h" ], "commitId" : "23ab2c599764008ba346ff82c9f3cc1dc44a3bcd", "timestamp" : 1769591488000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复路径距离参考线太远的问题。\u000a\u000a", "date" : "2026-01-28 17:11:28 +0800", "id" : "23ab2c599764008ba346ff82c9f3cc1dc44a3bcd", "msg" : "fix: SSEP: 修复路径距离参考线太远的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" ], "commitId" : "7e76fe3459080b1a580cbcc56f37f7b8a7e5ab8d", "timestamp" : 1769604049000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复集卡多段倒车搜索的参数配置错误\u000a\u000a", "date" : "2026-01-28 20:40:49 +0800", "id" : "7e76fe3459080b1a580cbcc56f37f7b8a7e5ab8d", "msg" : "fix: SSEP: 修复集卡多段倒车搜索的参数配置错误", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "d3b7c4de30890c7e42d6dcbb0294c553a8be1f1b", "timestamp" : 1769660300000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加忽略文件\u000a", "date" : "2026-01-29 12:18:20 +0800", "id" : "d3b7c4de30890c7e42d6dcbb0294c553a8be1f1b", "msg" : "feat:添加忽略文件", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/data_structures/polyline.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/keb_optimizer/imv_keb_optimizer.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/truck_general_planner.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/scenarios/truck_accurate_reversing_planner.cc", "ssep/coarse_search/topology_analysis/candidate_goals_generator.cc", "ssep/ssep_planner.cc", "ssep/scenarios/truck_multi_segment_parking_planner.h" ], "commitId" : "3f79843062a68caac24ce465ab10b9e9eedc8a29", "timestamp" : 1769669012000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复车道线被处理为闭合多边形的bug（太阳纸业搜索失败），修复imv 进停车位因为终点约束导致路径异常的问题。\u000a\u000a", "date" : "2026-01-29 14:43:32 +0800", "id" : "3f79843062a68caac24ce465ab10b9e9eedc8a29", "msg" : "fix: SSEP: 修复车道线被处理为闭合多边形的bug（太阳纸业搜索失败），修复imv 进停车位因为终点约束导致路径异常的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/polyline.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/topology_analysis/candidate_goals_generator.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/cmd/cmd_align.cpp", "data/app/cmd/cmd_remote_ctrl.cpp" ], "commitId" : "69cbabd709b7a5abca45565cac111b29a97a8a1b", "timestamp" : 1769683166000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:align过程中,拒绝直线步进\u000a", "date" : "2026-01-29 18:39:26 +0800", "id" : "69cbabd709b7a5abca45565cac111b29a97a8a1b", "msg" : "feat:align过程中,拒绝直线步进", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_align.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_remote_ctrl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/shortest_path_heur_table.h" ], "commitId" : "0e5019f451e9849431de16056aa7c992bb0f92d4", "timestamp" : 1769683224000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:程序启动直接搜索带来的崩溃问题\u000a", "date" : "2026-01-29 18:40:24 +0800", "id" : "0e5019f451e9849431de16056aa7c992bb0f92d4", "msg" : "fix:程序启动直接搜索带来的崩溃问题", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/shortest_path_heur_table.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" ], "commitId" : "e9d377907b25f7250122a63b2a85af7c594a6327", "timestamp" : 1769684229000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 改进集卡多段倒车拉直轨迹\u000a\u000a", "date" : "2026-01-29 18:57:09 +0800", "id" : "e9d377907b25f7250122a63b2a85af7c594a6327", "msg" : "chore: SSEP: 改进集卡多段倒车拉直轨迹", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc", "ssep/offboard/servers/CMakeLists.txt", "ssep/test/gpu_ref_line_cost_test.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "421421ce7a739015db91605151bd469bf4c6ad60", "timestamp" : 1769684359000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 提升GPU进堆场搜索成功率\u000a\u000a", "date" : "2026-01-29 18:59:19 +0800", "id" : "421421ce7a739015db91605151bd469bf4c6ad60", "msg" : "chore: SSEP: 提升GPU进堆场搜索成功率", "paths" : [ { "editType" : "edit", "file" : "ssep/test/gpu_ref_line_cost_test.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/gpu_tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/gpu_bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/offboard/servers/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_error.cpp" ], "commitId" : "c8a3b1118c057ddd6d41173a7ba464c6f16097ae", "timestamp" : 1769688248000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:修复搜索失败报警的等级\u000a", "date" : "2026-01-29 20:04:08 +0800", "id" : "c8a3b1118c057ddd6d41173a7ba464c6f16097ae", "msg" : "feat:修复搜索失败报警的等级", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_error.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/forward_ec.cpp" ], "commitId" : "c08184033470325d01ae5320719d887cf85777a7", "timestamp" : 1769688306000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:编译包warning的bug\u000a", "date" : "2026-01-29 20:05:06 +0800", "id" : "c08184033470325d01ae5320719d887cf85777a7", "msg" : "feat:编译包warning的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/other_decider/replan_decider.cpp", "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp", "hmi/widget/distance.cpp", "plan/prepare/prepare_objs.cpp", "data/other/flow_control.hpp", "data/ssep/ssep_common.hpp" ], "commitId" : "cfeb0de536c35738ce6c8edd26d137f19662abe8", "timestamp" : 1769688411000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:进堆场约束调整，并且调整low bay type\u000a", "date" : "2026-01-29 20:06:51 +0800", "id" : "cfeb0de536c35738ce6c8edd26d137f19662abe8", "msg" : "feat:进堆场约束调整，并且调整low bay type", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.hpp" }, { "editType" : "edit", "file" : "hmi/widget/distance.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_objs.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/replan_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp" ], "commitId" : "54f5492c7e8131e77a3f2d06ece6b26adbd01bf8", "timestamp" : 1769690274000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复虚拟场桥低贝判断的bug\u000a", "date" : "2026-01-29 20:37:54 +0800", "id" : "54f5492c7e8131e77a3f2d06ece6b26adbd01bf8", "msg" : "fix:修复虚拟场桥低贝判断的bug", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "e66185efe00f95aa664a175af89a424fd21150fe", "timestamp" : 1769695915000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加忽略文件\u000a", "date" : "2026-01-29 22:11:55 +0800", "id" : "e66185efe00f95aa664a175af89a424fd21150fe", "msg" : "feat:添加忽略文件", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/cmd/cmd_align.cpp", "data/app/cmd/cmd_remote_ctrl.cpp" ], "commitId" : "d4cea6dfddd7fad5447e8cee911680335ef33c69", "timestamp" : 1769696009000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:align过程中,拒绝直线步进\u000a", "date" : "2026-01-29 22:13:29 +0800", "id" : "d4cea6dfddd7fad5447e8cee911680335ef33c69", "msg" : "feat:align过程中,拒绝直线步进", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_align.cpp" }, { "editType" : "edit", "file" : "data/app/cmd/cmd_remote_ctrl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/shortest_path_heur_table.h" ], "commitId" : "00bed67b47d871229e82d530f79ce5031491454e", "timestamp" : 1769696009000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:程序启动直接搜索带来的崩溃问题\u000a", "date" : "2026-01-29 22:13:29 +0800", "id" : "00bed67b47d871229e82d530f79ce5031491454e", "msg" : "fix:程序启动直接搜索带来的崩溃问题", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/shortest_path_heur_table.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_error.cpp" ], "commitId" : "8a13951775d29f50947f92f1377db0ec05b53cbf", "timestamp" : 1769696028000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:修复搜索失败报警的等级\u000a", "date" : "2026-01-29 22:13:48 +0800", "id" : "8a13951775d29f50947f92f1377db0ec05b53cbf", "msg" : "feat:修复搜索失败报警的等级", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_error.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/forward_ec.cpp" ], "commitId" : "602f87374ffec1027240349d5e298039407a29cb", "timestamp" : 1769696115000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:编译包warning的bug\u000a", "date" : "2026-01-29 22:15:15 +0800", "id" : "602f87374ffec1027240349d5e298039407a29cb", "msg" : "feat:编译包warning的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/other_decider/replan_decider.cpp", "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp", "hmi/widget/distance.cpp", "plan/prepare/prepare_objs.cpp", "data/other/flow_control.hpp", "data/ssep/ssep_common.hpp" ], "commitId" : "fdcc507633b1d13142454f7e892c0f2a14befd34", "timestamp" : 1769696172000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:进堆场约束调整，并且调整low bay type\u000a", "date" : "2026-01-29 22:16:12 +0800", "id" : "fdcc507633b1d13142454f7e892c0f2a14befd34", "msg" : "feat:进堆场约束调整，并且调整low bay type", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/replan_decider.cpp" }, { "editType" : "edit", "file" : "hmi/widget/distance.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.hpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_objs.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_common.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/other/flow_control.cpp" ], "commitId" : "0525883764c99198faf1072afbb9bf0e37506573", "timestamp" : 1769696187000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复虚拟场桥低贝判断的bug\u000a", "date" : "2026-01-29 22:16:27 +0800", "id" : "0525883764c99198faf1072afbb9bf0e37506573", "msg" : "fix:修复虚拟场桥低贝判断的bug", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/CMakeLists.txt" ], "commitId" : "699fb3610ca31093d6fc4c645064c4d708fccbfd", "timestamp" : 1769760788000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复编译报错的bug\u000a", "date" : "2026-01-30 16:13:08 +0800", "id" : "699fb3610ca31093d6fc4c645064c4d708fccbfd", "msg" : "fix:修复编译报错的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/CMakeLists.txt" ], "commitId" : "b2fd552e9172869904153cbf112a700c2d7659d4", "timestamp" : 1769761184000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: SSEP: 固定编译时的依赖顺序\u000a\u000a", "date" : "2026-01-30 16:19:44 +0800", "id" : "b2fd552e9172869904153cbf112a700c2d7659d4", "msg" : "fix: SSEP: 固定编译时的依赖顺序", "paths" : [ { "editType" : "edit", "file" : "ssep/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/CMakeLists.txt" ], "commitId" : "74dbb4238f4c9d365dea2b77353f46ee301e0af4", "timestamp" : 1769761198000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: SSEP: 固定编译时的依赖顺序\u000a\u000a", "date" : "2026-01-30 16:19:58 +0800", "id" : "74dbb4238f4c9d365dea2b77353f46ee301e0af4", "msg" : "fix: SSEP: 固定编译时的依赖顺序", "paths" : [ { "editType" : "edit", "file" : "ssep/CMakeLists.txt" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/ctrl/parallel_controller/parallel_controller.cpp", "node/process/prepare/prepare_attr.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "data/config/cfg_lon_dynamic_mpc.hpp", "math/identification/parking_distance_estimator.cpp", "algorithm/ctrl/lon_controller/longitude_controller.cpp", "node/process/prepare/prepare_attr.hpp", "math/identification/vehicle_mass_estimator.hpp", "data/config/cfg_static.hpp", "math/identification/parking_distance_estimator.hpp", "math/identification/vehicle_mass_estimator.cpp", "data/ctrl_frame.hpp", "data/config/cfg_static.cpp", "math/util/algebra.cpp", "math/filter/lowpass_filter.hpp", "data/ctrl/vehicle_attr.cpp", "data/ctrl/vehicle_attr.hpp", "data/vehicle/vehicle_state.cpp", "math/filter/lowpass_filter.cpp", "data/config/cfg_mass_estimation.cpp", "node/process/prepare/prepare_traj.cpp", "data/config/cfg_mass_estimation.hpp", "data/ctrl/observer_debug_data.cpp", "data/vehicle/vehicle_state.hpp", "data/config/cfg_lon_dynamic_mpc.cpp", "data/config/cfg_parking_distance.cpp", "algorithm/ctrl/lon_controller/longitude_controller.hpp", "data/config/cfg_parking_distance.hpp", "data/ctrl/observer_debug_data.hpp" ], "commitId" : "a923869ff2b65ba1d498bbcf665233ce775f4e18", "timestamp" : 1766733310000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo@senior.auto", "comment" : "feat: 新质量估计仅观测 && 停车距离预估用于刹车\u000a", "date" : "2025-12-26 15:15:10 +0800", "id" : "a923869ff2b65ba1d498bbcf665233ce775f4e18", "msg" : "feat: 新质量估计仅观测 && 停车距离预估用于刹车", "paths" : [ { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.hpp" }, { "editType" : "add", "file" : "data/config/cfg_lon_dynamic_mpc.hpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_state.hpp" }, { "editType" : "add", "file" : "math/filter/lowpass_filter.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" }, { "editType" : "add", "file" : "data/config/cfg_lon_dynamic_mpc.cpp" }, { "editType" : "edit", "file" : "data/ctrl/vehicle_attr.hpp" }, { "editType" : "add", "file" : "math/identification/vehicle_mass_estimator.hpp" }, { "editType" : "add", "file" : "math/identification/vehicle_mass_estimator.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_mass_estimation.hpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.hpp" }, { "editType" : "add", "file" : "data/config/cfg_parking_distance.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_mass_estimation.cpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.hpp" }, { "editType" : "edit", "file" : "data/ctrl_frame.hpp" }, { "editType" : "add", "file" : "math/filter/lowpass_filter.hpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_state.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_traj.cpp" }, { "editType" : "add", "file" : "math/identification/parking_distance_estimator.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_static.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_static.hpp" }, { "editType" : "edit", "file" : "data/ctrl/vehicle_attr.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/parallel_controller/parallel_controller.cpp" }, { "editType" : "add", "file" : "math/identification/parking_distance_estimator.cpp" }, { "editType" : "add", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "math/util/algebra.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/observer_debug_data.cpp", "math/identification/parking_distance_estimator.hpp", "data/config/cfg_parking_distance.cpp", "node/logic.cpp", "node/process/prepare/prepare_attr.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "math/identification/parking_distance_estimator.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.hpp", "data/ctrl/observer_debug_data.hpp" ], "commitId" : "7dda8c34a63e4d30cf3dcf9780f3aa263b839484", "timestamp" : 1767534200000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix: 停车距离预估功能优化\u000a", "date" : "2026-01-04 21:43:20 +0800", "id" : "7dda8c34a63e4d30cf3dcf9780f3aa263b839484", "msg" : "fix: 停车距离预估功能优化", "paths" : [ { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.hpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.cpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.cpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.hpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.hpp" }, { "editType" : "edit", "file" : "node/logic.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "math/identification/vehicle_mass_estimator.hpp", "data/config/cfg_static.hpp", "node/process/prepare/prepare_attr.cpp", "node/logic.cpp", "algorithm/ctrl/lon_controller/longitude_controller.hpp", "algorithm/ctrl/lon_controller/longitude_controller.cpp", "math/identification/vehicle_mass_estimator.cpp", "data/config/cfg_static.cpp" ], "commitId" : "2799ce7485702c9d7189502f490de21a8aa15fa0", "timestamp" : 1767592495000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix：质量估计优化\u000a", "date" : "2026-01-05 13:54:55 +0800", "id" : "2799ce7485702c9d7189502f490de21a8aa15fa0", "msg" : "fix：质量估计优化", "paths" : [ { "editType" : "edit", "file" : "math/identification/vehicle_mass_estimator.hpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_static.hpp" }, { "editType" : "edit", "file" : "node/logic.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_static.cpp" }, { "editType" : "edit", "file" : "math/identification/vehicle_mass_estimator.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_creep.cpp", "algorithm/ctrl/parallel_controller/parallel_controller.cpp", "data/config/cfg_mass_estimation.cpp", "data/config/cfg_parking_distance.cpp", "data/config/cfg_proc_longctrl.cpp", "node/process/prepare/prepare_attr.cpp" ], "commitId" : "4f01eede08a21e7f5b7bcf889161d952c84f998e", "timestamp" : 1767598267000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix:平行驾驶优化\u000a", "date" : "2026-01-05 15:31:07 +0800", "id" : "4f01eede08a21e7f5b7bcf889161d952c84f998e", "msg" : "fix:平行驾驶优化", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_creep.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_mass_estimation.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/parallel_controller/parallel_controller.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_proc_longctrl.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "data/config/cfg_creep.cpp", "config/config_car/ctrl.yaml", "data/config/cfg_creep.hpp", "data/config/cfg_parking_distance.cpp", "data/config/cfg_steering_offset_observer.cpp" ], "commitId" : "90f98d70883afe14d1fb6d43076799142013caf5", "timestamp" : 1767750736000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: the creep brake consider weight\u000a", "date" : "2026-01-07 09:52:16 +0800", "id" : "90f98d70883afe14d1fb6d43076799142013caf5", "msg" : "feat: the creep brake consider weight", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : "config/config_car/ctrl.yaml" }, { "editType" : "edit", "file" : "data/config/cfg_steering_offset_observer.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_creep.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_creep.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl/observer_debug_data.cpp", "data/config/cfg_parking_distance.cpp", "math/identification/parking_distance_estimator.hpp", "node/process/prepare/prepare_attr.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "data/config/cfg_parking_distance.hpp", "math/identification/parking_distance_estimator.cpp", "data/ctrl/observer_debug_data.hpp", "data/config/cfg_proc_longctrl.cpp" ], "commitId" : "8466365acd87ff59ad79555ffa2b88589270c612", "timestamp" : 1767872387000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix: 对准优化\u000a", "date" : "2026-01-08 19:39:47 +0800", "id" : "8466365acd87ff59ad79555ffa2b88589270c612", "msg" : "fix: 对准优化", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_parking_distance.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_proc_longctrl.cpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.hpp" }, { "editType" : "edit", "file" : "data/ctrl/observer_debug_data.hpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ctrl_frame.cpp" ], "commitId" : "ce524138624fd65d93879bf9aaec24d18f0eb824", "timestamp" : 1767941855000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo@senior.auto", "comment" : "fix: 停车预估配置参数bug\u000a", "date" : "2026-01-09 14:57:35 +0800", "id" : "ce524138624fd65d93879bf9aaec24d18f0eb824", "msg" : "fix: 停车预估配置参数bug", "paths" : [ { "editType" : "edit", "file" : "data/ctrl_frame.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "math/identification/parking_distance_estimator.cpp", "data/config/cfg_parking_distance.hpp", "math/identification/parking_distance_estimator.hpp", "data/config/cfg_parking_distance.cpp", "node/process/prepare/prepare_attr.cpp" ], "commitId" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "timestamp" : 1768213456000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: parking distance estimator add first stage gain\u000a", "date" : "2026-01-12 18:24:16 +0800", "id" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "msg" : "feat: parking distance estimator add first stage gain", "paths" : [ { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.hpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.hpp" }, { "editType" : "edit", "file" : "node/process/prepare/prepare_attr.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" ], "commitId" : "dd7bdbfa7e4a6fbd98a506fcbb6f91548f98348a", "timestamp" : 1769053193000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix: truck creep 中积分项修复\u000a", "date" : "2026-01-22 11:39:53 +0800", "id" : "dd7bdbfa7e4a6fbd98a506fcbb6f91548f98348a", "msg" : "fix: truck creep 中积分项修复", "paths" : [ { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_parking_distance.cpp", "math/identification/parking_distance_estimator.cpp", "data/config/cfg_mass_estimation.cpp" ], "commitId" : "3789b319f892ee4d2d001a7eed76c49e3d33dfd6", "timestamp" : 1769054398000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix: 默认关闭新功能\u000a", "date" : "2026-01-22 11:59:58 +0800", "id" : "3789b319f892ee4d2d001a7eed76c49e3d33dfd6", "msg" : "fix: 默认关闭新功能", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_mass_estimation.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_parking_distance.cpp" }, { "editType" : "edit", "file" : "math/identification/parking_distance_estimator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore", "data/config/cfg_creep.hpp", "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "data/config/cfg_creep.cpp", "node/process/proc/proc_longtiude_controller.cpp", "algorithm/ctrl/lon_controller/longitude_controller.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.hpp" ], "commitId" : "15ddb883751c5e495ab1bc53780ce75c4cb9c828", "timestamp" : 1769427745000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: creep增加动力学前馈但默认关闭 && creep日志记录优化\u000a", "date" : "2026-01-26 19:42:25 +0800", "id" : "15ddb883751c5e495ab1bc53780ce75c4cb9c828", "msg" : "feat: creep增加动力学前馈但默认关闭 && creep日志记录优化", "paths" : [ { "editType" : "edit", "file" : "node/process/proc/proc_longtiude_controller.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : ".gitignore" }, { "editType" : "edit", "file" : "data/config/cfg_creep.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_creep.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/ctrl/lon_controller/truck_lon_controller.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller_2.hpp", "algorithm/ctrl/lon_controller/truck_lon_controller.hpp", "algorithm/ctrl/lon_controller/longitude_controller.hpp", "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "algorithm/ctrl/lon_controller/longitude_controller.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller_2.cpp", "algorithm/ctrl/lon_controller/truck_creep_controller.hpp" ], "commitId" : "9e3d2535ae2b3f4b1ec84118c55fc1d377e930bc", "timestamp" : 1769482888000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: creep中的position模式变更策略\u000a", "date" : "2026-01-27 11:01:28 +0800", "id" : "9e3d2535ae2b3f4b1ec84118c55fc1d377e930bc", "msg" : "feat: creep中的position模式变更策略", "paths" : [ { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller_2.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller_2.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/longitude_controller.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.hpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_lon_controller.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_lon_controller.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/ctrl/lon_controller/truck_creep_controller.cpp", "data/config/cfg_proc_longctrl.cpp", "data/config/cfg_proc_longctrl.hpp" ], "commitId" : "07d9a9a7bf6e2e03e27c50b94c7d6d86c4e66036", "timestamp" : 1769499140000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "feat: 对准末端速度参数化\u000a", "date" : "2026-01-27 15:32:20 +0800", "id" : "07d9a9a7bf6e2e03e27c50b94c7d6d86c4e66036", "msg" : "feat: 对准末端速度参数化", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_proc_longctrl.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_proc_longctrl.cpp" }, { "editType" : "edit", "file" : "algorithm/ctrl/lon_controller/truck_creep_controller.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/vehicle_state.cpp" ], "commitId" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "timestamp" : 1769743730000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, "authorEmail" : "liuhongshuo", "comment" : "fix: 使用底盘速度的消息源更改\u000a", "date" : "2026-01-30 11:28:50 +0800", "id" : "e5748087e51b8fb72bc49d5bf1d9de4ad7e584c4", "msg" : "fix: 使用底盘速度的消息源更改", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/vehicle_state.cpp" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "include/hdmap_interface/map_elements/lane_info.h", "interface/parser/map_loader.cc", "include/hdmap_interface/map_elements/lane.h", "interface/map_elements/lane_info.cc" ], "commitId" : "9bd34b4f13cefd1806e27f61c462e4811e23376a", "timestamp" : 1766555181000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/caoxue", "fullName" : "caoxue" }, "authorEmail" : "caoxue@senior.auto", "comment" : "feat_out: add lane name\u000a", "date" : "2025-12-24 13:46:21 +0800", "id" : "9bd34b4f13cefd1806e27f61c462e4811e23376a", "msg" : "feat_out: add lane name", "paths" : [ { "editType" : "edit", "file" : "include/hdmap_interface/map_elements/lane_info.h" }, { "editType" : "edit", "file" : "include/hdmap_interface/map_elements/lane.h" }, { "editType" : "edit", "file" : "interface/parser/map_loader.cc" }, { "editType" : "edit", "file" : "interface/map_elements/lane_info.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "include/hdmap_interface/public_data_struct.h" ], "commitId" : "be65f77d9d0f6a3ae20cc796e381889a03ce43ee", "timestamp" : 1768476271000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/caoxue", "fullName" : "caoxue" }, "authorEmail" : "caoxue@senior.auto", "comment" : "feat_out: Region新增REGION_REDUCE_FOLLOW_DISTANCE,REGION_MORE_LOWER_SECURITY_THRESHOLD\u000a", "date" : "2026-01-15 19:24:31 +0800", "id" : "be65f77d9d0f6a3ae20cc796e381889a03ce43ee", "msg" : "feat_out: Region新增REGION_REDUCE_FOLLOW_DISTANCE,REGION_MORE_LOWER_SECURITY_THRESHOLD", "paths" : [ { "editType" : "edit", "file" : "include/hdmap_interface/public_data_struct.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "include/hdmap_interface/public_data_struct.h" ], "commitId" : "54b823e6862db580891364af3696b59c0bb82b5c", "timestamp" : 1768476383000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/caoxue", "fullName" : "caoxue" }, "authorEmail" : "caoxue@senior.auto", "comment" : "feat_out: Region新增REGION_REDUCE_FOLLOW_DISTANCE,REGION_MORE_LOWER_SECURITY_THRESHOLD\u000a", "date" : "2026-01-15 19:26:23 +0800", "id" : "54b823e6862db580891364af3696b59c0bb82b5c", "msg" : "feat_out: Region新增REGION_REDUCE_FOLLOW_DISTANCE,REGION_MORE_LOWER_SECURITY_THRESHOLD", "paths" : [ { "editType" : "edit", "file" : "include/hdmap_interface/public_data_struct.h" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "extrinsics/M012", "extrinsics/M011", "extrinsics/WH001", "extrinsics/XL005", "extrinsics/XL003", "extrinsics/QHDBSS_GT_IGV03", "extrinsics/QDQG370", "extrinsics/M042", "extrinsics/M041", "extrinsics/M040", "extrinsics/BHTY_SANY_ADT001", "extrinsics/HNYP_JLX7E_AT076", "extrinsics/HNYP_JLX7E_AT077", "extrinsics/HNYP_JLX7E_AT078", "extrinsics/P15", "extrinsics/T10", "extrinsics/M034", "extrinsics/NBDX_ZQ_AT706", "extrinsics/M033", "extrinsics/NBDX_ZQ_AT707", "extrinsics/M032", "extrinsics/PXPZ_SANY_AT003", "extrinsics/PXPZ_SANY_AT004", "extrinsics/P701", ".gitmodules", "extrinsics/M030", "extrinsics/P702", "extrinsics/PXPZ_SANY_AT001", "extrinsics/P10", "extrinsics/PXPZ_SANY_AT002", "extrinsics/P703", "extrinsics/P704", "extrinsics/P13", "extrinsics/P12", "extrinsics/P705", "extrinsics/M039", "extrinsics/M037", "extrinsics/M036", "extrinsics/NBDX_ZQ_AT708", "extrinsics/NBDX_ZQ_AT709", "extrinsics/T08", "extrinsics/T07", "extrinsics/QDDF002", "extrinsics/T09", "extrinsics/NBDX_ZQ_AT710", "extrinsics/T02", "extrinsics/XJKW_JF_AT002", "extrinsics/T01", "extrinsics/P08", "extrinsics/T04", "extrinsics/P07", "extrinsics/T03", "extrinsics/T06", "extrinsics/T05", "extrinsics/P09", "extrinsics/M022", "extrinsics/M021", "extrinsics/M020", "extrinsics/QHDBSS_GT_IGV01", "extrinsics/QHDBSS_GT_IGV02", "extrinsics/NBDX_ZQ_AT711", "extrinsics/NBDX_ZQ_AT712", "extrinsics/M029", "extrinsics/M027", "extrinsics/M025", "extrinsics/PXYYG_JF_AT001", "extrinsics/QDQG369", "extrinsics/MDL002" ], "commitId" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "timestamp" : 1768058152000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/lanxiaosong", "fullName" : "lanxiaosong" }, "authorEmail" : "lanxiaosong@senior.auto", "comment" : "添加大榭701-712&更最新提交\u000a", "date" : "2026-01-10 23:15:52 +0800", "id" : "5f4fd3a7cf90596819b96651a885927cc4e499f0", "msg" : "添加大榭701-712&更最新提交", "paths" : [ { "editType" : "edit", "file" : "extrinsics/XJKW_JF_AT002" }, { "editType" : "edit", "file" : "extrinsics/M033" }, { "editType" : "edit", "file" : "extrinsics/PXPZ_SANY_AT004" }, { "editType" : "edit", "file" : "extrinsics/XL003" }, { "editType" : "edit", "file" : "extrinsics/M034" }, { "editType" : "edit", "file" : ".gitmodules" }, { "editType" : "edit", "file" : "extrinsics/M042" }, { "editType" : "edit", "file" : "extrinsics/M036" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT712" }, { "editType" : "edit", "file" : "extrinsics/M012" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT708" }, { "editType" : "edit", "file" : "extrinsics/QHDBSS_GT_IGV03" }, { "editType" : "edit", "file" : "extrinsics/M025" }, { "editType" : "edit", "file" : "extrinsics/WH001" }, { "editType" : "edit", "file" : "extrinsics/MDL002" }, { "editType" : "edit", "file" : "extrinsics/M039" }, { "editType" : "edit", "file" : "extrinsics/T08" }, { "editType" : "edit", "file" : "extrinsics/T07" }, { "editType" : "edit", "file" : "extrinsics/P10" }, { "editType" : "edit", "file" : "extrinsics/QHDBSS_GT_IGV01" }, { "editType" : "edit", "file" : "extrinsics/M021" }, { "editType" : "edit", "file" : "extrinsics/HNYP_JLX7E_AT076" }, { "editType" : "edit", "file" : "extrinsics/P704" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT711" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT709" }, { "editType" : "edit", "file" : "extrinsics/P15" }, { "editType" : "edit", "file" : "extrinsics/T10" }, { "editType" : "edit", "file" : "extrinsics/BHTY_SANY_ADT001" }, { "editType" : "edit", "file" : "extrinsics/M011" }, { "editType" : "edit", "file" : "extrinsics/P13" }, { "editType" : "edit", "file" : "extrinsics/T05" }, { "editType" : "edit", "file" : "extrinsics/T06" }, { "editType" : "edit", "file" : "extrinsics/PXYYG_JF_AT001" }, { "editType" : "edit", "file" : "extrinsics/T09" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT710" }, { "editType" : "edit", "file" : "extrinsics/M030" }, { "editType" : "edit", "file" : "extrinsics/QDQG370" }, { "editType" : "edit", "file" : "extrinsics/PXPZ_SANY_AT002" }, { "editType" : "edit", "file" : "extrinsics/P702" }, { "editType" : "edit", "file" : "extrinsics/M029" }, { "editType" : "edit", "file" : "extrinsics/HNYP_JLX7E_AT078" }, { "editType" : "add", "file" : "extrinsics/NBDX_ZQ_AT707" }, { "editType" : "edit", "file" : "extrinsics/M037" }, { "editType" : "edit", "file" : "extrinsics/QDDF002" }, { "editType" : "edit", "file" : "extrinsics/P07" }, { "editType" : "edit", "file" : "extrinsics/P09" }, { "editType" : "edit", "file" : "extrinsics/T03" }, { "editType" : "edit", "file" : "extrinsics/P12" }, { "editType" : "edit", "file" : "extrinsics/P703" }, { "editType" : "edit", "file" : "extrinsics/NBDX_ZQ_AT706" }, { "editType" : "edit", "file" : "extrinsics/T01" }, { "editType" : "edit", "file" : "extrinsics/P08" }, { "editType" : "edit", "file" : "extrinsics/QHDBSS_GT_IGV02" }, { "editType" : "edit", "file" : "extrinsics/M040" }, { "editType" : "edit", "file" : "extrinsics/HNYP_JLX7E_AT077" }, { "editType" : "edit", "file" : "extrinsics/M041" }, { "editType" : "edit", "file" : "extrinsics/M020" }, { "editType" : "edit", "file" : "extrinsics/M032" }, { "editType" : "edit", "file" : "extrinsics/PXPZ_SANY_AT001" }, { "editType" : "edit", "file" : "extrinsics/T02" }, { "editType" : "edit", "file" : "extrinsics/XL005" }, { "editType" : "edit", "file" : "extrinsics/M027" }, { "editType" : "edit", "file" : "extrinsics/T04" }, { "editType" : "edit", "file" : "extrinsics/PXPZ_SANY_AT003" }, { "editType" : "edit", "file" : "extrinsics/M022" }, { "editType" : "edit", "file" : "extrinsics/P705" }, { "editType" : "edit", "file" : "extrinsics/P701" }, { "editType" : "edit", "file" : "extrinsics/QDQG369" } ] } ], "kind" : "git" } ], "culprits" : [ { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/lanxiaosong", "fullName" : "lanxiaosong" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/matao", "fullName" : "matao" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/caoxue", "fullName" : "caoxue" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" } ], "nextBuild" : None, "previousBuild" : { "number" : 257, "url" : "http://159.27.114.184:8080/jenkins/user/yuli/my-views/view/all/job/orin-slave64/257/" } }